Skip to content
Rainmaker
Language EN
Log inTry it free
Try it free · 7 daysPricing
Help centerUpdated · 21 min read

Contacts and your LinkedIn network

See every person across your campaigns in one list, import your own LinkedIn connections privately, and add the ones who fit straight into a campaign.

The Contacts page has three tabs. My campaign contacts lists everyone your campaigns have sourced, imported or added, one row per person. My LinkedIn network shows the 1st-degree connections of the LinkedIn accounts you connected yourself. Companies lists every company across your campaigns (see Leads and companies). From a campaign's Leads tab you can then add people from your network as leads: they get a direct message from you, never a connection request.

Where to find it and who can use it

In the sidebar, click Contacts. The page heading reads Contacts, with three tabs at the top: My campaign contacts, My LinkedIn network and Companies.

ActionOwnerAdminApproverEditorViewer
See My campaign contacts and open a person's detailsYesYesYesYesYes
See My LinkedIn network (only your own connections)YesYesYesYesYes
Import my connections, Sync now, Try againYesYesYesYesNo
Export your network (paid subscription only)YesYesYesYesNo
Add people from your network to a campaignYesYesYesYesNo

Your network is private to you. Nobody else in the workspace can see the connections of a LinkedIn account you connected, and Owners and Admins get no exception. In the same way, you only see the networks of accounts you connected yourself, never a teammate's. See Team and roles.

Sourced by Rainmaker

This tab lists every lead in the workspace across all campaigns: "Everyone your campaigns have sourced, imported or added, across every campaign. A person in several campaigns is one row." It is read-only: to change a lead, open their campaign.

Columns

ColumnWhat it shows
NameThe person's name (or Unnamed contact), and a LinkedIn profile link when there is one. Click the name to open their details.
TitleTheir job title, from the most recent campaign they joined.
CompanyTheir company, from the most recent campaign they joined.
CampaignsOne badge per campaign they are in. Hover a badge to read "Open this person in …"; click it to open the person as a lead of that campaign.
StatusHow far they have got: the furthest status across all their campaigns.
FitTheir best fit score across all their campaigns, or a dash.
SourceWhere they came from. A person can have several sources.
AddedThe date they were first added to any campaign.

One row per person

Rainmaker groups a person's campaigns into one row by their email address, or, when there is no email, by their LinkedIn profile link. Someone known only by email in one campaign and only by LinkedIn in another shows as two rows. People whose data was erased at their request do not appear.

Status

The Status column shows the furthest status the person reached in any campaign:

StatusWhat it means
SourcedFound, details not looked up yet.
EnrichedDetails looked up, waiting for a fit score.
ScoredScored, or added by you without scoring. Ready for drafting.
ApprovedApproved for outreach.
ContactedAt least one message was sent to them.
RepliedThey replied.
RejectedRejected in every campaign they are in. A rejection in one campaign does not hide a better status in another.

Source

SourceWhat it means
Prospecting agentFound by Rainmaker's prospecting agent with Source more or Run prospector.
Target companyFound at a company you added to a campaign as a target.
Added manuallyTyped in with Add contacts.
CSV importImported from a CSV file.
CRM importImported from your CRM.
Your LinkedIn networkAdded from someone's own LinkedIn connections.

Search, filter and sort

  • Search name, company, or title searches every person.
  • All campaigns narrows the list to one campaign.
  • All statuses narrows the list to one status.
  • Sort by Newest first, Oldest first, Highest fit or Lowest fit.

The list shows 50 people per page; use the arrows at the bottom to move between pages. With no leads yet, the tab says No contacts yet ("People your campaigns source, import or add by hand appear here, one row per person."). When filters hide everyone, it says No contacts match ("Try a different search or clear the filters."). If the list cannot be fetched, it says Contacts could not be loaded.; reload the page.

Clicking a name or a campaign badge opens the same lead details you see on a campaign's Leads tab, without the drafting buttons. See Leads and companies.

Your own network

This tab shows "Your 1st-degree LinkedIn connections, from the accounts you connected. Only you can see them, and nothing is sent to them." Connections are not leads. Importing them sends nothing to anyone.

If you have not connected a LinkedIn account yourself, the tab says Connect your LinkedIn account first ("Your network is read from a LinkedIn account you connected yourself. Only you can see it — teammates see their own.") with an Open LinkedIn settings button. If your accounts cannot be fetched, it says Your LinkedIn accounts could not be loaded.; reload the page. Connecting an account is covered in Channels: your mailbox and LinkedIn.

If you connected more than one LinkedIn account, pick one in the LinkedIn account dropdown. An account that is not connected right now shows its status in brackets, and the tab says This LinkedIn account is not connected ("Reconnect it in LinkedIn settings to import or sync its connections.").

Import your connections

  1. In the sidebar, click Contacts, then My LinkedIn network.
  2. Under Import your LinkedIn connections ("Bring in the 1st-degree connections of … so you can see who you already know. They are not leads, nothing is sent to them, and only you can see them."), click Import my connections.

Rainmaker reads your connections a page at a time. The progress line says, for example, Importing… 1,000 connections so far · 1 page read. Pages are fetched a minute or two apart so LinkedIn sees a person browsing, not a script, so a large network takes a while. You can leave the page; the import carries on.

Connections appear in the table as they are read. When the import finishes, the line reads, for example, 1,248 connections imported · last synced 5 min ago.

The connections table

ColumnWhat it shows
NameName, photo, headline, and an Already a lead badge when the person is already a lead in any of your campaigns.
TitleJob title, read from their headline.
CompanyCompany, read from their headline.
EmailTheir email address with a copy button, "from LinkedIn" or "found", and Verified when the mailbox was confirmed. Otherwise Find email, Finding… while a search runs, or No email found (hover it for the search date). See Find email addresses.
ConnectedThe date you connected on LinkedIn.
ProfileView opens their LinkedIn profile.

Use Search name, headline, or company to find someone. The list shows 50 connections per page, newest connections first. If nothing matches your search, it says No connections match ("Try a different name, company or headline."). While an import has not read anyone yet, it says No connections yet ("Connections appear here as the import reads them."). A connection with no name shows as LinkedIn member.

Keeping your network up to date

  • Click Sync now to read all your connections again. Connections you removed on LinkedIn are dropped from the list after a full sync.
  • Rainmaker also picks up new connections by itself: when someone accepts an invitation, and with a light check every few hours.

Export your network

On a paid subscription, click Export at the right of the toolbar to download the selected LinkedIn account's whole network as a spreadsheet file (CSV). There is one row per connection, with these columns: First name, Last name, Headline, Title, Company, Company website, Industry, Company size, City, Country, Email, Email source, Email status, Phone, LinkedIn URL, Connected on and Enriched on.

  • Title and Company show what auto-enrich found, or what the headline said when the person has not been looked up yet.
  • Email is the address LinkedIn returned to you while looking the person up, or the one Find email found. Email source says which ("LinkedIn" or "Found") and Email status says "Verified", "Not verified" or "No email found".
  • Phone is filled only when LinkedIn returned it to you while looking the person up. Most rows have none.
  • The file is named after the account and the day, for example linkedin-network-marisol-s-linkedin-2026-10-07.csv, and opens in Excel with accented names intact.

Only you can export your own network, just as only you can see it. Export is greyed out until at least one connection has been imported. If the download cannot start, the tab says Your network could not be exported. Try again in a moment.

On the free trial, or without an active subscription, clicking Export opens Export is for subscribed workspaces ("Exporting your network is available on a paid subscription. You can find more details in Billing."). View billing opens Settings, Billing; Close closes the window. Nothing is downloaded. See Billing and plan.

Find email addresses

The Email column shows a person's email address when one is known:

  • from LinkedIn: the person shares it with their LinkedIn connections, and auto-enrich picked it up for free.
  • found: you searched for it with Find email. A Verified badge means the mailbox was confirmed to exist. Without the badge, the address was found but the company's mail server accepts every address, so it could not be fully confirmed.

When no email is known, the cell shows Find email. Click it to search for that person's work email right away, by their LinkedIn profile, name and company. The cell reads Finding… while the search runs, then shows the address or No email found (hover it to see when it was searched). A person is never searched twice. If LinkedIn later returns an email for someone marked No email found, the email replaces it.

To search many people at once, tick them in the table and click Find their emails, next to Enrich them first. You can search at most 200 people at a time. The result reads, for example, Found 31 · no email for 12 · 5 skipped: people who already have an email, were already searched, or have no LinkedIn profile link are skipped.

  • Finding emails is for subscribed workspaces. On the free trial, or without an active subscription, the button opens Finding emails is for subscribed workspaces ("Finding the email addresses of your connections is available on a paid subscription. You can find more details in Billing."). View billing opens Settings, Billing. See Billing and plan.
  • Each LinkedIn account can search up to 500 people a day. After that, the tab says You've reached today's limit of 500 email searches for this LinkedIn account. It resets at midnight UTC.
  • If a search fails, the button comes back so you can try again; the tab says The email could not be searched. Try again in a moment.
  • Nothing is ever searched automatically: auto-enrich only picks up emails LinkedIn itself returns. Only you can search your own network or see the results.

Import states

StateWhat it meansWhat you can do
Not imported yetYou have never imported this account's network.Click Import my connections.
Import queued…The import is about to start.Wait.
Importing… N connections so farPages are being read.Wait, or leave the page.
N connections imported · last synced …The import finished.Sync now to read it again.
The import stoppedSomething went wrong. A reason is shown.Click Try again, after fixing the reason if there is one.

The reasons you may see when an import stops:

  • This LinkedIn account is not connected. Reconnect it in Settings, then sync again.
  • This LinkedIn account was removed.
  • This LinkedIn account now belongs to someone else.
  • LinkedIn kept refusing the connection list, so the import stopped. Try "Sync now" later.
  • LinkedIn returned a connection list this app does not understand. The team has been notified.
  • LinkedIn did not return your connections.

If Import my connections or Sync now fails straight away, the tab says The import could not be started. Check that this LinkedIn account is still connected, then try again. If the progress cannot be fetched while an import runs, you may see The import status could not be loaded.; reload the page. The import itself carries on.

If you disconnect your LinkedIn account

Disconnecting a LinkedIn account deletes its imported network straight away. To use it again, reconnect the account and import your connections again.

People you already added from that network stay on their campaigns, but they can only be messaged from that account, so their messages wait until it is reconnected. See Messages to people from your network.

Add people from your network to a campaign

You can add people you are already connected to as leads of a campaign. Rainmaker ranks your connections against the campaign's ICP (its segment's job titles and industries) and shows why each one matches. For a walkthrough with screenshots, see How to find leads in your LinkedIn network.

Before you start

  • Connect your own LinkedIn account and import your connections (see above). Nothing is imported for you from the campaign.
  • The campaign needs a segment.
  • If the campaign is set to send LinkedIn messages from one specific account, it must be the account whose network you want to use.
  • You need a role that can edit campaigns.
  • LinkedIn accounts need a paid plan: during the free trial you cannot connect one. See Billing and plan.

Open your network from Source more

  1. Open the campaign and click its Leads tab.
  2. Click Source more (on a campaign with no leads yet the button is called Run prospector).
  3. In the Source more window, choose Your LinkedIn network ("Add people you're already connected to, ranked against this campaign's ICP").

The window becomes Add people from your LinkedIn network. Back returns to the choice.

Your LinkedIn network is greyed out, with the reason underneath, when:

  • Connect your own LinkedIn account first. Only accounts you connected yourself are offered; teammates' networks stay private to them.
  • Your LinkedIn account isn't connected right now. Reconnect it in Settings → LinkedIn.
  • Your role can't add leads to this campaign.

A link to Settings → LinkedIn sits next to the reason.

Pick the account and see who matches

Pick the LinkedIn account whose network you want to use. Rainmaker compares each connection's title and headline with the ICP and shows a summary, for example 12 of 1,248 connections match this ICP, the segment name (ICP: followed by its name), and who was left out.

Each person shows their name (or LinkedIn member), their title and company (or No headline), and the reasons they match:

ReasonWhat it means
Title matches: …Their title contains one of the ICP's job titles.
Similar title to: …Same kind of role, at the same or a neighbouring level.
Same function as: …Same function, at a quite different level (for example a manager against a VP).
Related to: …Partly related title. Shown for ranking only; it does not count as a match.
Industry hint: …Their headline or company mentions one of the ICP's industries. It moves people up the list but never makes a match on its own.

The best matches come first. A connection carries no country or company size, so those are not compared here. Every person you add is still scored like any other lead, unless you skip scoring.

By default only matches are listed. Tick Show all connections to pick anyone else. Use Search name, title, or company to find someone. At most 500 people are listed at a time; Select all then reads, for example, Select all (first 500 of 1,248). Search to narrow the list.

Strong and possible matches

Some workspaces see a newer, two-part match instead. If your window shows Strong match and Possible match badges, Rainmaker checks two things for each person: their role, and the type of company they work at, compared with the ICP.

  • The summary reads, for example, 24 strong · 152 possible matches among 3,892 connections.
  • Strong match: both the role and the company type fit (or the ICP names no company type). Strong matches are ticked for you.
  • Possible match: only one of the two fits, or the company type isn't known yet. Possible matches are never ticked for you; tick the ones you want.
  • Next to the badge, a short reason explains the match, for example the matching title and the company type.
  • Rainmaker may read some companies' own websites to confirm their type. While it does, the summary shows "Checking 40 company websites…", then, for example, "Checked 40 company websites: 3 people confirmed as strong." People confirmed this way move up to Strong match and are ticked, unless you have already changed the selection yourself.
  • A second line compares with the older title-only match, for example "Previously matched: 176 → now 24 strong · 152 possible · 0 dropped".

If you don't see these badges, your workspace uses the title match described above.

Who is left out

The summary line says who is not shown, for example Not shown: 14 already leads, 2 opted out, 3 at your company, 1 without a profile link.

  • already leads: the person is already a lead in any campaign of your workspace.
  • opted out: the person opted out or is on your do-not-contact list.
  • at your company: they work at your own company.
  • without a profile link: Rainmaker has no LinkedIn profile link to message them on.

If the list is empty, it says Nobody in this network matches this ICP yet. Tick "Show all connections" to pick people yourself., Everyone in this network is already a lead or can't be added. or, after a search, Nobody matches that search.

Add them

  1. Tick the people you want, or Select all. You can add up to 200 people at a time; the line under the list shows how many are selected.
  2. You don't pick a country. The window says "Rainmaker detects each person's country from their LinkedIn profile and applies the right rules."
  3. Leave Skip fitness scoring unticked unless you have already judged their fit yourself. Ticked, they are drafted regardless of score.
  4. Click the add button, which counts your selection, for example Add 12 to campaign. It stays greyed out until at least one person is picked, and reads Adding 12… while it works. If it fails, you see These people could not be added. Try again.

The confirmation says, for example, Added 12 people from your network to this campaign. It may add 2 were already on it. or 1 could not be added (already a lead elsewhere, opted out, or no longer in your network). Click Done.

How each person's country is set

Rainmaker reads each added person's country from their LinkedIn profile, one person at a time, so it can take a while for a large batch. The confirmation shows the progress, for example "Detecting countries for 12 people…", then the result, for example "10 in your markets · 2 outside" (and "1 country unknown (strictest rules)" when a country couldn't be found). It also explains: "People are drafted once their country is known; anyone outside this campaign's markets is never contacted."

On the Leads tab and in the person's details, the country shows one of these:

Country showsWhat it means
Detecting country…"Rainmaker is reading this person's country from their LinkedIn profile. Until it knows, the strictest (European) rules apply and nothing is drafted or sent."
A country code, such as FRThe country was found, and that market's rules apply.
Country unknown — strictest rules applied"Rainmaker couldn't find this person's country on LinkedIn, so the strictest (European) rules apply to every message." Messages to them need an active European market.
Outside campaign markets (after the country code, when known)"This person is outside this campaign's markets, so Rainmaker won't draft or send anything to them."

The people you add appear on the Leads tab as LinkedIn first leads with no email address. On the Contacts page their source is Your LinkedIn network.

Messages to people from your network

You are already connected to these people, so Rainmaker never sends them a connection request:

  • When you draft the campaign's sequence, each one gets a first direct message from the LinkedIn account they are connected to. In Review it is labelled First message.
  • Every message to them goes out only from that account, whatever the campaign's LinkedIn sender setting says.
  • Nothing is sent until the drafts are approved, as for every other lead. See Review and approvals.
  • If that account is disconnected, paused or at today's sending limit, their messages wait. They are never sent from another account. The Leads tab shows LinkedIn messages to people from "…"'s network are waiting with a link to LinkedIn settings.
  • Replies follow the same rule: you can only answer them from that account. If it cannot send, the reply is refused and the message names the account: "Reconnect … in Settings → LinkedIn to reply — this person is connected to that account only.", "Turn … back on in Settings → LinkedIn to reply — this person is connected to that account only.", "… has reached its LinkedIn send limit for today — this person is connected to that account only. Try again tomorrow, or send it from that account in LinkedIn yourself." or This person is connected to one of your LinkedIn accounts only, and that account cannot send right now. Fix the account, or send the reply from that account in LinkedIn yourself and mark it sent. See Inbox and meetings.

When the campaign sends from another LinkedIn account

A campaign can be set to send LinkedIn messages from one account only (the LinkedIn account field in the Sending section of the campaign's Settings tab). If that is a different account from the one whose network you picked, nothing can be added. The window says This campaign sends LinkedIn messages only from "…": your connections are connected to your account, not to that one, so Rainmaker would have to send them a connection request from someone they don't know.

To fix it:

  • if the campaign's sender is another account of yours, pick that account's network instead; or
  • change the campaign's LinkedIn sender to your account (Sender settings opens the campaign's settings), then come back.

The notice ends with the matching advice: "Pick … above to use its network instead, or change this campaign's LinkedIn sender." when the campaign's sender is one of your own accounts, or "Change this campaign's LinkedIn sender to your account first if you want to add them." when it belongs to a teammate.

Other messages in the network window

MessageWhat it meansWhat to do
Your network isn't imported yetYou have not imported this account's connections.Click Import it, which opens Contacts, My LinkedIn network.
Your network is still importingConnections appear as the import reads them.Wait; the list updates by itself. See progress opens the import.
Pick a segment firstThe campaign has no segment to match against.Click Pick a segment and choose one in the campaign's settings.
This LinkedIn account isn't connectedThe account needs reconnecting.Click LinkedIn settings and reconnect it.
This campaign sends from another LinkedIn accountThe campaign is set to send from a different account.Change the campaign's LinkedIn sender.
Your network could not be loaded.A temporary problem.Close the window and try again.

Statuses and what they mean

WhereStatusWhat it means
Contacts, StatusSourced, Enriched, Scored, Approved, Contacted, Replied, RejectedThe furthest point the person reached in any campaign. See Status.
Your own networkNot imported yet, Import queued…, Importing…, … connections imported, The import stoppedWhere the import of your connections stands. See Import states.
Your own networkAlready a leadThe person is already a lead in one of your campaigns.
Network windowTitle matches, Similar title to, Same function as, Related to, Industry hintWhy a connection is ranked where it is.

Troubleshooting

Questions about contacts and your linkedin network

Still stuck?

Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.