Review and approvals
Review is where every drafted email and LinkedIn message waits for a yes. Check the sources, then approve, edit, reject or ask for a redraft.
Rainmaker drafts your outreach, then stops and waits. Every drafted email and LinkedIn message lands in Review, and nothing is sent until someone with the right role approves it (or the campaign runs on Autopilot, see Autopilot and Review). This guide explains every part of the Review area: the queue, a batch, the source checks, the buttons, and what each message on screen means.
In Review you will sometimes see the word "touch". A touch is one message in a person's sequence: one email step, or one LinkedIn note or message.
Where to find it and who can use it
Click Review in the sidebar (its tooltip reads "Everything the agent wants to send, awaiting your yes"). Review opens on the Drafts tab. When LinkedIn needs a person's attention, a second tab, LinkedIn, appears next to it. Each tab shows a count in brackets, for example Drafts (12).
What you can do depends on your workspace role:
| Action | Owner | Admin | Approver | Editor | Viewer |
|---|---|---|---|---|---|
| Open Review, read drafts and sources | Yes | Yes | Yes | Yes | Yes |
| Approve, Edit, Reject, Approve all | Yes | Yes | Yes | No | No |
| Request redraft | Yes | Yes | Yes | No | No |
| Continue to send, Copy note, Report sent, Mark sent, Mark accepted | Yes | Yes | Yes | No | No |
| Decide Proposed actions | Yes | Yes | Yes | No | No |
| Switch a campaign to Autopilot | Yes | Yes | No | No | No |
Editors and viewers see the same drafts, but without the decision buttons. If someone without the right role tries a decision anyway, they see Your role is not allowed to perform this action. Ask an owner or admin to change your role (see Team and roles).
The Review page
The page is titled Review. The line under the title counts the drafts waiting, for example "536 drafts to review across 8 campaigns." If some of them are blocked, it adds "13 need an edit before they can go." When nothing is waiting it reads "Nothing to review right now."
Next to the title, a badge names the workspace's approval mode: Copilot mode · you approve every send, or Autopilot on for N campaigns · you approve every other send when any campaign runs on Autopilot (see Autopilot and Review).
Batches
Drafts are grouped into batches: one open batch per campaign and per channel. Batches with drafts that need an edit come first. Each row in the table shows:
| Column | What it shows |
|---|---|
| Campaign | The campaign name (click it to open the batch). The batch's total number of drafts is on the batch's own page. |
| Channel | Email drafts or LinkedIn notes (or Drafts in the rare case a batch mixes both). The ⓘ next to the column name explains why LinkedIn and email batches fill up differently: "LinkedIn drafts a lead's whole sequence in one pass; email drafting spreads across many smaller runs." |
| To review | Drafts still waiting for a decision, for example 12 to review, or Resolved when every draft is decided |
| Need edits | Pending drafts that cannot be approved yet, for example 2 need edits (empty when there are none) |
| Approved | Drafts already approved, for example 30 approved. This column only shows while Show resolved is on. |
| Waiting | How long the oldest pending draft has waited, such as waiting 2 days. It turns amber after more than 7 days. Hover it to see the exact time. |
Click the arrow at the end of a row (tooltip Review batch) or the campaign name to open the batch.
On a phone, each batch is a card instead of a table row, with the same details, and the note about LinkedIn and email batches sits under the cards.
Resolved history
The Show resolved switch above the table is off by default, so you only see batches that still have something pending. Turn it on to also see batches where every draft has been decided, with their Approved count.
When nothing is waiting you see No drafts awaiting review ("Nothing is waiting on you right now. Turn on Show resolved to see resolved history."). If no campaign has ever been drafted, Show resolved shows No approval batches yet ("Drafted campaign messages will appear here after Rainmaker completes research and source validation."). Both empty states offer View campaigns.
If the page cannot load, you see Approval batches could not be loaded. Refresh the page. If you see Sign in and select a workspace to review drafts., sign in again and pick your workspace.
Proposed actions
Sometimes a section called Proposed actions appears above the batches, with the description "Changes proposed in Ask. Nothing runs until you approve it here." It lists actions that Rainmaker suggests but will not carry out on its own. There are two kinds:
- Meeting cards from replies. When a prospect's reply agrees to a specific time and your calendar is free at that time, Rainmaker files a card such as "Dana Smith agreed to 2026-10-08 14:00 UTC — Book it?". When a prospect asks to cancel a meeting, the card reads "... asked to cancel the ... UTC meeting — Cancel it?". Times on these cards are shown in UTC.
- Changes asked for in Ask. If your workspace has Ask (a tab in Insights), changes you ask it to make (rename a campaign, pause a campaign, change campaign steering, change a daily send budget) wait here too.
Each row shows the Action, when it was proposed, Proposed by (an email address, or "—" when Rainmaker filed it from a reply) and a Status:
- Awaiting approval: click Approve to carry it out, or Reject to drop it.
- Stuck — retry or reject: it was approved but could not finish, for example because your calendar could not be checked at that moment. Click Retry or Reject.
After you decide, the row may show a short note:
- Already decided by a teammate's email: someone else decided it first. Nothing runs twice.
- Approved, but the action failed to execute.: for example, the meeting time has passed or is no longer free. Book the meeting from the Inbox instead (see Inbox and meetings).
Errors: Your role can't decide proposals. means your role cannot approve; That decision didn't go through — try again. means the request failed, so try again. You also get a notification when an approved action finishes ("An action you approved is done — it booked a meeting.") or fails ("An action you approved failed — it could not book a meeting.").
Reviewing a batch
Open a batch to review it. The title is the campaign's name (the batch type, Email drafts or LinkedIn notes, until the name has loaded). One line under it gives the batch type, the person (or "N people") and a live safety tally such as "8 of 9 drafts fully sourced · 3 of 3 recipients verified". Each person's row in the Drafts list keeps its own "N to review". Click Review at the top to go back.
The Drafts list
The left column, Drafts, has one row per person, with a badge showing how many are pending in total. Each person's row shows:
- N to review: drafts you can approve now.
- N blocked: drafts that cannot be approved yet.
- approved or decided when nothing is left to do for that person.
- "N steps in sequence": how many messages that person's sequence has.
Click a person to see their whole sequence on the right (a draft with no linked person is listed as Unknown contact). The header shows the person's name, "N touches in this sequence", and the language it was drafted in, for example "Drafted in French — to change the sending language, use Request redraft."
Reading a draft
Each message in the sequence is a card. A card shows:
- The Subject (email only) and a step label: Sequence step 1, Sequence step 2 and so on for email; Connection request, First message (for someone already in your LinkedIn network) or Message 1, Message 2 for LinkedIn.
- A status badge: Review (waiting for you), Blocked, approved, rejected or Sent.
- For email, who it goes to and from: To: the person's name and address with a Verified, Unverified or Invalid address badge, and From: your sender name and mailbox.
- The message itself, with numbered citation markers such as [1] after factual sentences.
- Sources (N) under the message: click it to show the list of sources.
- For email, a folded section Appended when this sends: signature & compliance footer. Open it to see the exact signature and footer added to the email when it goes out (see Sequences and sending).
- For a LinkedIn follow-up, the line Added when this sends: followed by your website address, when Rainmaker adds your website to the first follow-up message.
If the draft is in another language, a Show in English checkbox appears. Tick it to read a machine translation. The note "Machine translation for review — the original is what sends." reminds you that the prospect receives the original language.
Checking sources and citations
Every factual sentence must point to a source. Click a marker such as [2] in the text (or Sources (N) under the message, then Show full excerpt under a source) to open that source's evidence. Each source in the list shows:
- What kind of source it is: Company website, News coverage, Job posting, Funding announcement, Social profile, Web search: ..., Researched: ..., General knowledge, Other source, or Your website — /page when the sentence describes your own product from your own site. A link icon opens the original page, with its domain shown next to the label.
- A confidence meter: High, Medium or Low. Hover it to see the score out of 100. High means 70 or more, Medium 40 to 69, Low under 40. Low-confidence sources are highlighted, so read those sentences carefully.
- When the page was captured, for example "captured 3 Oct".
- The sentence the source supports, and the exact quoted excerpt from the page. Click Show full excerpt to expand it and Show less to fold it.
Read the excerpt and ask yourself: does the source really say what the sentence says? If not, edit the sentence or reject the draft. The tutorial Check sources and fit score walks through this step by step.
Keyboard shortcuts
On a batch page you can work from the keyboard. Click Shortcuts under the Drafts list to show the hint "J/K person · A approve · E edit · R reject".
| Key | What it does |
|---|---|
| J | Select the next person |
| K | Select the previous person |
| A | Approve the selected person's first pending draft (only if it is not blocked) |
| E | Open the selected person's first pending draft for editing |
| R | Reject the selected person's first pending draft |
Shortcuts do nothing while you are typing in a field, while a draft is open for editing, or when you hold Ctrl, Cmd, Alt or Shift. A, E and R only work if your role can decide.
Approve, edit or reject a draft
Pending drafts have Approve and Edit buttons. On a batch page Reject is in the card's ⋯ menu; on a campaign's Drafts tab it is a third button.
Approve
Click Approve (hover text "Approve draft") to accept the draft as it is. You see Draft approved. Rainmaker checks the draft again at the moment you approve it. If it no longer passes, you see "This draft cannot be approved:" followed by the reason, and the card turns Blocked.
Approving does not always mean "sends now". An approved email waits for its place in the sequence, the campaign's sending window, and the campaign being active. See Sequences and sending for the full path.
Approve all
Approve all N at the top of a person's sequence approves every draft for that person that can be approved, in order. Blocked drafts are skipped. When it finishes you see Approved N drafts. If one draft fails part-way, it stops and tells you how many were approved, for example "2 drafts approved." followed by the reason the next one failed.
Edit a draft
Click Edit to change the wording. Each sentence gets its own text box, plus a subject field for email. A counter under the draft shows the length against the limit: words for email (for example "84 / 150 words", shown in red when over) and characters for LinkedIn (for example "212 / 300").
Click Save edit to save, or Cancel to discard. After saving you see Draft updated. Then:
- Rainmaker checks the edited draft again straight away.
- The draft goes back to waiting (status Review), even if you had approved it before. Approve it again when you are happy.
- If the edit still breaks a rule, the card shows Approval blocked with the reason.
- Any English review translation is removed, because it no longer matches your text.
Things to know when editing:
- You can change the words of a sentence, but not add or remove sentences, and a sentence cannot be left empty. To drop a sentence entirely, use Request redraft with a note, or reject the draft.
- You cannot add a new source. A sentence keeps the source it was written with.
- If you rewrite a sentence that was blocked because its source does not support it, the block is lifted. Rainmaker trusts your rewrite, so make sure the new sentence matches the source excerpt.
- LinkedIn connection notes have LinkedIn's own 300-character limit. A longer note is refused with "LinkedIn notes must be 300 characters or fewer."
If the save fails you see The edited draft could not be saved. (or "... Check your connection and try again." when you are offline). If the save worked but the page could not reload, you see "Draft saved. The batch could not be reloaded, so citation markers may be missing until you refresh the page." Refresh the page.
Reject
Click Reject to turn the draft down (on a batch page, open the card's ⋯ menu first, or press R). You see Draft rejected. A rejected draft is never sent. Rejecting one step does not reject the person's other steps; decide each one.
Request a redraft
If a person's sequence reads wrong, click Request redraft at the top of their sequence. A small form opens:
- Redraft in: keep Auto — lead's country/campaign or pick one of the 23 languages Rainmaker drafts in (listed in Draft language). A language you pick is kept for this person's later drafts and reply drafts until you pick Auto — lead's country/campaign again.
- A note box: "What should change in this person's sequence? (e.g. shorter and mention the funding round)".
Click Redraft sequence (it stays disabled until you write a note or pick a different language), or Cancel. When it finishes you see "Sequence redrafted — review the new drafts." The new drafts replace the pending and blocked ones in place. Drafts already approved or sent are never replaced. A redraft reuses the sources already found for that person; it does not research again.
When a person has LinkedIn drafts waiting, a line under Request redraft reads "Reads generic? Request redraft with a note on what to change."
If you see Nothing pending to redraft for this person., every draft for that person has already been decided. If you see "The AI model service is temporarily unavailable. Try again in a moment." or The redraft could not be requested., try again in a moment. If you click buttons very quickly you may see "Too many requests. Try again in a moment."; wait a few seconds.
Approval blocked: what each reason means
A draft that breaks a sourcing or length rule is marked Blocked. Its Approve button is disabled (hover text "Blocked by source validation"), and a red Approval blocked notice lists the reasons, one per sentence. In edit mode, the same reason appears under the sentence it applies to. Sentences are numbered from 1 in the order they appear.
| What the notice says | What it means | How to fix it |
|---|---|---|
| Sentence N states a fact with no source — add a sourced claim or remove it. | The sentence claims something about the prospect or their company, but no source backs it. | You cannot attach a new source while editing, and you cannot delete a sentence. Click Request redraft (for example "drop the sentence about their headcount"), or Reject the draft. |
| Sentence N cites a source that does not exist. | The sentence points to a source that is not on record for this person. | Request redraft or Reject. |
| Sentence N is not supported by its source — followed by a short explanation | The sentence cites a real source, but the source does not actually say that. The explanation names what is missing. | Rewrite the sentence so it says only what the excerpt says, then save. Or Request redraft or Reject. |
| Sentence N is uncited and is not an approved greeting, closing, or ask. | Only a short list of greetings ("Hi Dana,"), sign-offs and soft asks may appear without a source. This sentence is none of those. | Rewrite it as a plain greeting, sign-off or ask, or Request redraft. |
| Sentence N reads like a follow-up, but this is the first message to this person — rewrite it or request a redraft. | A follow-up line such as "Just following up on my note below." appears in the first email, where there is nothing to follow up on. | Request redraft, or rewrite that sentence. |
| Sentence N asks for a meeting. This campaign's goal is account signups, so drafts can't ask for a meeting — rewrite it or request a redraft. | A meeting ask such as "Open to a 15-minute call?" appears in a campaign whose goal is getting people to create an account, not booking meetings. | Request redraft. The new draft will use the sign-up ask instead. |
| Sentence N suggests you know this person beyond your LinkedIn connection — rewrite it so it only mentions the connection. | A message to someone from your LinkedIn network claims more than the connection itself, such as a past meeting. | Rewrite the sentence, or Request redraft. |
| Sentence N reads like a first introduction, but you're already connected with this person on LinkedIn — rewrite it. | A message to someone you are already connected with introduces you as a stranger would. | Rewrite the sentence, or Request redraft. |
| This connection note is longer than LinkedIn's 300-character limit — shorten it. | A LinkedIn connection note is over LinkedIn's limit. | Click Edit and shorten it. |
| Sentence N can't be sent as written — edit it or request a redraft. or This draft can't be sent as written — edit it or request a redraft. | Another rule blocked the sentence or the draft. | Edit the sentence, or Request redraft or Reject. |
| This draft is N words (limit M) — trim it down. | The email is longer than the word limit. | Click Edit, shorten the sentences until the counter is within the limit, and save. |
| An unsourced factual sentence must be removed or grounded before this message can send. | A general notice, shown when no specific reason is recorded. On an email you already approved, it usually means the email was stopped just before sending (see Sequences and sending). | For a pending draft, Request redraft or Reject. For an approved email, open the lead and check the email address and opt-out status. |
The first email in a sequence may also carry one sentence of reasoning without a source (why your offer matters to this prospect), as long as it states no checkable fact. Follow-ups may use simple nudge lines.
Blocked drafts are never sent, never auto-approved on Autopilot, and stay in Review until someone edits or rejects them.
Launching from a batch
Once at least one email in the batch is approved, Continue to send appears at the top of the batch (for roles that can send). It opens the campaign's Ready to send, which asks for a mailbox and your name if they are missing, then launches with Launch campaign. See Connect your mailbox when you launch.
Each campaign also has its own Drafts tab, between Leads and Inbox, badged with the number of drafts waiting. It shows the same review for that campaign only, with an Email / LinkedIn switch. The keyboard hint sits behind Shortcuts and each message's sources behind Sources (N), as on a batch page; Approve, Edit and Reject are buttons on each card.
The campaign's progress steps show the Approve stage as "Review copy" until something is approved, then "N approved". In a campaign that is already running, you do not need to launch again: approved emails join the sending queue on their own. To learn what happens next, see Sequences and sending.
LinkedIn notes in Review
LinkedIn drafts appear in batches labelled LinkedIn notes. You approve, edit and reject them exactly like email. A person's LinkedIn sequence is the Connection request (a note attached to the invitation, up to 300 characters) followed by Message 1, Message 2 and so on, which go out only after the person accepts. For someone already in your LinkedIn network, the first step is a First message instead of an invitation.
When LinkedIn automation is on and a connected LinkedIn account is available, approved LinkedIn messages are sent for you and you do not need the buttons below. Otherwise you send them yourself from LinkedIn and record it in Rainmaker. See Channels: your mailbox and LinkedIn for the account settings.
Copy note, Open LinkedIn, Report sent
An approved LinkedIn message shows these buttons on its card:
- Copy note copies the message text. It changes to Copied for a moment. If your browser blocks the clipboard you see "Clipboard access was denied. Select the note text to copy it manually."
- Open LinkedIn opens the person's LinkedIn profile in a new tab (shown when a profile link is on record).
- Report sent, then Confirm sent (or Cancel), records that you sent it yourself. You see Marked as sent.
Rules for reporting a send:
- A follow-up message can only be reported once the person has accepted your connection request. Otherwise you see This manual send could not be recorded.
- Manual and automatic LinkedIn sends share one daily limit, 25 per workspace by default, counted from midnight UTC. When it is reached you see The LinkedIn reporting cap has been reached for today. Try again tomorrow.
Mark accepted
After a connection request is sent, its card shows Mark accepted. When the person accepts on LinkedIn, click Mark accepted, then Confirm accepted. You see Marked accepted, and the card then shows "Accepted" with the date. Follow-up messages are timed from this date. When the invitation went out through a connected LinkedIn account, Rainmaker can usually record the acceptance for you. If it fails you see This acceptance could not be recorded.
The LinkedIn tab
The LinkedIn tab in Review is a daily worklist for LinkedIn messages handled by hand. It only appears when there is work only a person can do: LinkedIn automation is off, no connected LinkedIn account is available, a LinkedIn send failed or was never confirmed, or a sent connection request is still waiting for Mark accepted. When automation is handling everything, the tab hides.
The page is titled LinkedIn ("A daily queue for approved notes, sending, and outcome feedback.") and starts with a notice, How these get sent: "Rainmaker drafts every note and learns from the outcomes. With LinkedIn automation on and a seat connected, approved notes are sent for you. Otherwise you open LinkedIn, send them yourself, and mark them sent here."
Four numbers sit at the top: Ready to send (approved notes), Reported sent, Replies and Meetings. Below them you can search by prospect or company, filter by status (All statuses, Draft, Ready to send, Sent) and by campaign, and click Refresh. Each row shows the Prospect, Campaign, Step, the Note, its Status and Outcomes, with these actions:
- The link icon opens the LinkedIn profile.
- The message icon opens reply assist for that person (see Inbox and meetings).
- Review opens the draft's batch when it still needs a decision.
- For an approved message: a copy icon (you see "LinkedIn note copied.") and Mark sent (you see "LinkedIn note marked sent."). Unlike the batch page, Mark sent here records the send in one click, so only press it after you have sent the message.
- For a sent connection request: Mark accepted, then Confirm accepted ("LinkedIn note marked accepted.").
- For a sent message: outcome buttons connected, replied, referred, meeting and declined. Click the one that happened ("Replied outcome recorded."). These are your own reports and help Rainmaker learn which LinkedIn messages work. Rows with nothing reported show "No result yet".
Use Load more at the bottom for older rows. When the list is empty you see No LinkedIn tasks ("Draft a LinkedIn note from a campaign lead with a profile URL.") with Open campaigns. Errors: LinkedIn tasks could not be loaded., Clipboard access was blocked by the browser., The LinkedIn result could not be recorded. If Mark sent fails, the reason appears in plain words, usually "Follow-up messages can only be marked sent after the person accepts your connection request. Mark the connection note accepted first." or "Today's LinkedIn limit has been reached. Send the rest tomorrow." The full list is in Channels: your mailbox and LinkedIn.
The Review badge
The number next to Review in the sidebar is the work waiting for you: drafts waiting for a decision plus approved LinkedIn messages that are waiting to be sent. The badge is hidden when nothing is waiting. The Drafts (N) tab counts pending drafts; the LinkedIn (N) tab counts approved LinkedIn messages waiting to send. While counts load, the tabs show no number; a real zero shows as "(0)".
Autopilot and Review
Each campaign has an Approval mode on its Overview tab, with a badge reading Copilot or Autopilot.
- Copilot — human review (the default, "You approve each batch before it can send.") means everything waits in Review.
- Autopilot approves every draft that passes the source checks and sends it within a daily email limit. Only owners and admins can switch it on; for others the option is greyed out with "Requires the autopilot permission."
Choosing Autopilot opens Turn on autopilot?, which warns that no one reads these emails before they go out. Check Max emails per day (it starts at the campaign's current limit, or 50); Turn on autopilot stays disabled until it is a whole number of at least 1. Click Keep copilot review to change nothing. Messages you may see:
- "Autopilot on — grounded drafts will send without review, up to the daily email limit."
- "Autopilot off — drafts return to copilot review."
- "Autopilot needs a daily email limit before it can be turned on."
- "Autopilot could not be changed."
- On the campaign's Settings tab: "Autopilot is on for this campaign, so max emails per day cannot be left blank. Enter a number, or turn autopilot off first."
Each time Autopilot approves drafts you get a notification such as "Autopilot approved 12 drafts (2 blocked kept for review)." Blocked drafts always stay in Review for a person. Autopilot approves nothing while the campaign is paused or after the deliverability safeguard has paused it. The Review page shows the workspace's mode next to its title: "Copilot mode · you approve every send", or "Autopilot on for N campaigns · you approve every other send" when any campaign has Autopilot on. Check a campaign's Approval mode to see its own setting. See Copilot vs Autopilot and Campaigns.
Statuses and what they mean
| Status | Where you see it | What it means | What you can do |
|---|---|---|---|
| N to review | Review list | The batch has drafts waiting | Open the batch |
| N need edits | Review list | The batch has blocked drafts | Edit, redraft or reject them |
| Resolved | Review list (with Show resolved on) | Every draft is decided | Nothing |
| N to review | Drafts list | Drafts you can approve for this person | Approve, edit or reject |
| N blocked | Drafts list | Drafts that cannot be approved yet | See Approval blocked |
| approved / decided | Drafts list | Nothing left to do for this person | Nothing |
| Review | Draft card | Waiting for your decision | Approve, edit or reject |
| Blocked | Draft card | Breaks a sourcing or length rule, or was stopped before sending | Fix, redraft or reject |
| approved | Draft card | Approved and waiting to send | Nothing, or send it yourself for LinkedIn |
| rejected | Draft card | Turned down, will never send | Nothing |
| Sent | Draft card | Sent (or reported sent for LinkedIn) | For a connection request, Mark accepted when accepted |
| Awaiting approval | Proposed actions | A proposed action is waiting | Approve or Reject |
| Stuck — retry or reject | Proposed actions | Approved but did not finish | Retry or Reject |
Troubleshooting
- Why can't I approve this draft?
- What does "states a fact with no source" mean on a draft?
- What does "is not supported by its source" mean on a draft?
- Why is my draft blocked for an uncited sentence, a nudge line or a meeting ask?
- Why is my email draft blocked for being too long?
- Why did my edited draft go back to waiting for approval?
- Why don't I see Approve, Edit or Reject buttons in Review?
- Why is Review empty when my campaign has leads?
- Why does Request redraft say "Nothing pending to redraft for this person"?
- How do I change the language of a drafted sequence?
- Why does Report sent fail for a LinkedIn message?
- Why does copying a LinkedIn note say clipboard access was denied?
- When does the LinkedIn tab appear in Review?
- What are the proposed actions at the top of Review?
- What does "Stuck — retry or reject" mean on a proposed action?
- What does the number next to Review in the sidebar count?
- How do I check where a sentence in a draft came from?
- What do High, Medium and Low mean next to a source?
- Why doesn't the Launch campaign button appear on my approval batch?
- Why does an approval batch say it could not be found or loaded?
Related tutorials
Questions about review and approvals
- Why can't I approve this draft?
- What does "states a fact with no source" mean on a draft?
- What does "is not supported by its source" mean on a draft?
- Why is my draft blocked for an uncited sentence, a nudge line or a meeting ask?
- Why is my email draft blocked for being too long?
- Why did my edited draft go back to waiting for approval?
- Why don't I see Approve, Edit or Reject buttons in Review?
- Why is Review empty when my campaign has leads?
- Why does Request redraft say "Nothing pending to redraft for this person"?
- How do I change the language of a drafted sequence?
- Why does Report sent fail for a LinkedIn message?
- Why does copying a LinkedIn note say clipboard access was denied?
- When does the LinkedIn tab appear in Review?
- What are the proposed actions at the top of Review?
- What does "Stuck — retry or reject" mean on a proposed action?
- What does the number next to Review in the sidebar count?
- How do I check where a sentence in a draft came from?
- What do High, Medium and Low mean next to a source?
- Why doesn't the Launch campaign button appear on my approval batch?
- Why does an approval batch say it could not be found or loaded?
Still stuck?
Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.
More of the user guide
- Getting started25 min read
- Campaigns38 min read
- Leads and companies29 min read
- Contacts and your LinkedIn network21 min read
- Sequences and sending32 min read
- Inbox and meetings29 min read
- Channels: your mailbox and LinkedIn25 min read
- Integrations and CRM13 min read
- Home, Insights and signals33 min read
- Billing and plan20 min read
- Team and roles12 min read
- Settings16 min read
- Privacy and compliance14 min read
- Your account and workspace16 min read