Home, Insights and signals
Home tells you whether outreach is working right now and what is stopping it. Insights tells you what it costs, what converts and what the agent has learned. Signals and Ask help you act on what is happening in your market.
Rainmaker gives you two places to check results. Home answers "is it working right now?": what was sent, who replied, which meetings were booked, and anything that has stopped your outreach. Insights answers "is it worth it?": what a qualified meeting costs, which campaigns and channels convert, how well the reply drafts land, and the changes the agent proposes after learning from your results. This guide also covers the Signals page, the notifications bell, and Ask, if your workspace has it.
Where to find it and who can use it
- Home: click Home in the sidebar (tooltip: "What needs your attention today"). It is the first page you see after signing in. The page itself is titled Home.
- Insights: click Insights in the sidebar (tooltip: "Performance and what the agent learned").
- Signals: Signals is not in the sidebar and has no tab of its own. Press Ctrl+K (Cmd+K on a Mac), type "Signals" and press Enter.
- Ask: only if you see an Ask tab next to Insights at the top of the Insights page. See Ask.
Everyone in the workspace can open Home, Insights and Signals and read every number on them. What you can change depends on your role:
| Action | Owner | Admin | Approver | Editor | Viewer |
|---|---|---|---|---|---|
| Read Home, Insights and Signals | Yes | Yes | Yes | Yes | Yes |
| New campaign button and the checklist buttons on Home | Yes | Yes | Yes | Yes | No |
| Evaluate policies, approve, decline or roll back a learning policy | Yes | Yes | Yes | Yes | No |
| Scan now, Draft from signal and Retry signal draft | Yes | Yes | Yes | Yes | No |
| Approve a draft made from a signal (in Review) | Yes | Yes | Yes | No | No |
To learn what each role means, see Team and roles.
Home
The page header reads Home. Home shows, from top to bottom: anything that has stopped your outreach, heads-up notices, your getting-started checklist or a suggested next step, a time-range switch, the main numbers, the mix of reply types, your most recent replies and meetings, and a day-by-day table.
If you joined through a friend's referral, a banner at the top may say You were invited by a friend. or $10 referral credit added. Click the X to hide it. See Billing and plan for how the credit works.
The first time someone who can create campaigns opens Home in a new workspace with no campaigns, a short guided tour starts. See Getting started.
Problems that stop sending
A red banner on Home means outreach has actually stopped, or part of it has. Each red banner names the problem in one sentence and has a Fix button that takes you to the page where you can fix it. Red is used only for this: if you see red, something is not going out.
| Banner text | What it means | What to do |
|---|---|---|
| Sending is off: your sender name, company, and postal address aren't set. | Your workspace has no sender name, so no email can go out. | Click Fix. In Identity & signature, fill in From name and save. |
| Sending is off: the app's public URL isn't set, so unsubscribe links can't be built. | A setting on Rainmaker's side is missing, so emails can't include a working unsubscribe link. | You can't fix this yourself. Contact support from Help. |
| Sending is off: the app's public URL isn't a valid web address. | Same as above. | Contact support from Help. |
| Sending is off: the key that signs unsubscribe links isn't set. | Same as above. | Contact support from Help. |
| "Campaign name" is paused to protect your sending reputation — too many messages bounced recently. (or "too many people marked your messages as spam", or "your recent delivery results crossed the safety threshold") | Rainmaker paused this campaign automatically because its delivery results got risky. | Click Fix to open the campaign. Check its leads and copy before you resume it. See Sequences and sending. |
| Set up sending | No mailbox is connected, or the connected mailbox has stopped working, so nothing can send. | Click Fix and connect a mailbox. See Channels: your mailbox and LinkedIn. |
| Needs attention: domain verification incomplete | Your sending domain's setup isn't finished, so mail may not deliver. | Click Fix and finish the domain checklist on Email. |
| Daily outreach cap reached for you@yourcompany.com — 50 of 50 used today. New sequence emails wait until tomorrow, or raise the cap. Replies still send. | The mailbox sent as many sequence emails today as its daily cap allows. The rest wait for the next day (days start at midnight UTC). Replies you send are not affected. | Wait, or click Fix and raise the mailbox's daily cap on Email. |
| "Campaign name" is paused — nothing is going out. | Someone paused this campaign. | Click Fix and resume the campaign when you're ready. |
| "Campaign name" is paused — it reached its daily email limit. | The campaign sent as many emails today as its daily limit allows, so it paused. It does not restart by itself. | Click Fix and resume it tomorrow, or raise Max emails per day in its settings and resume now. |
| "Campaign name" stopped after an error on its last run. | The campaign's last run failed. | Click Fix to open the campaign and see what went wrong. |
| 3 approved LinkedIn messages are waiting on "Campaign name" — LinkedIn sending is turned off. | Messages are approved, but automatic LinkedIn sending is switched off for the workspace, so they are held, not lost. | Click Fix to open LinkedIn and turn sending on. See Channels: your mailbox and LinkedIn. |
The numbers and names in the examples above are illustrations: your banner shows your own mailbox, counts and campaign names.
Heads-up notices
A neutral (not red) strip shows things you should know while sending still works. Each has a Details link.
- Nearly at the daily outreach cap for you@yourcompany.com — 46 of 50 used today. New sequence emails will pause once the cap is reached; replies are not affected. This appears once a mailbox has used most of its daily cap.
- Test mode (dry-run) — emails compose and log but nothing delivers. or Test mode (mock sender) — nothing is actually sent. Your workspace is in a test setup and no real email is delivered. If you did not expect this, contact support from Help.
The getting-started checklist
Until your workspace sends its first emails, the top of Home shows a checklist titled Get set up. Its header says how many of the five steps are done and, during your free trial, how many days are left, for example Get set up · 2 of 5 done · 9 days left in your trial:
- Tell Rainmaker what you sell (about 3 minutes): done once you have approved your buyer profile and your first campaign exists. Button: Start.
- Find your first leads (1 click): done once the first lead is saved. Button: Find leads runs the lead search on your most recent campaign, the same as Run prospector on its Leads tab. A pop-up says the leads will appear in that campaign's Leads tab, with Open Leads and Stay here. While it runs, the step reads "Finding leads… usually done within a few minutes".
- Get your first drafts (1 click): done once the first drafts are written. Button: Write drafts drafts your campaign that has leads. A pop-up says the drafts will appear in Review, with Open Review and Stay here. While it runs, the step reads "Writing drafts… this can take a few minutes".
- Review your drafts: done once you approve your first draft. The step shows how many emails are waiting, for example 10 emails. Button: Review drafts, which opens the campaign's Drafts tab.
- Send your first emails: done once the first email is sent. Button: Continue to send, which opens Ready to send, where you connect your mailbox if you haven't yet, check your name and launch. See Connect your mailbox when you launch.
Each step ticks itself, with the date it was done, as soon as Rainmaker sees it, whatever the order. The checklist refreshes on its own every few seconds while Home is open. Only the next unfinished step has a button. If your role can't do that step, you see who to ask instead, for example "Ask an owner, admin or approver to send your first emails." If your free trial has ended, Find your first leads shows Your free trial has ended — subscribe to keep sourcing with Go to Billing; if the last lead search was stopped, its reason is shown under the button, the same way as on the Leads tab.
The checklist has no close button. It disappears for good once all five steps are done.
Until your first emails go out, the numbers further down Home (the period tabs, the tiles, recent replies and the daily table) are replaced by a single Nothing sent yet card: "Sent emails, replies and meetings show here once your first emails go out." They come back as soon as something is sent.
If the checklist can't load, you see Getting-started checklist unavailable with a Retry button. The numbers on the rest of the page are not affected.
Suggested next step
Once the checklist is done, Home may show one suggestion instead:
- Start with your first buyer segment (no campaigns yet), with a Create campaign button.
- Continue "Campaign name" (you have a campaign, but no lead has been contacted this calendar month), with a Continue campaign button.
- Outreach is active, but no replies yet (leads were contacted this calendar month, but nobody replied). Review your targeting and approved copy before sending more.
While your workspace has no campaigns at all, Home shows the banners and the checklist or suggestion, but not the numbers below.
Choose a time range
Use the Today, 7d, 30d and All tabs to choose the period. 7d is the default. Next to the tabs, Home names the exact days covered, for example "2026-09-30 → 2026-10-06 UTC", or "All time → 2026-10-06 UTC" on All. Days always run from midnight to midnight UTC, so "Today" may start earlier or later than your local midnight.
When you switch range, the old numbers stay on screen (dimmed) until the new ones arrive.
Sent, Replies and Meetings booked
- Sent: messages that went out in the period, by email and LinkedIn. The line underneath splits it, for example "40 email · 12 LinkedIn".
- Replies: replies received in the period. Underneath you see the replies and the number of leads contacted in the period, then the reply rate: replies divided by leads contacted in the same period. A reply can answer a message sent before the period, so this rate can go above 100%. If nobody was contacted in the period, the rate shows "—" with "nobody was contacted in this period".
- Meetings booked ("Booked in this period"): meetings booked in the period that are still on. A meeting that was later cancelled is not counted.
Each tile has a small chart of the daily values (not on Today, and not when every day is zero).
Hot-lead replies and accounts created
Under the tiles, one line shows two more counts:
- hot-lead replies: replies that Rainmaker labelled Hot lead. This counts replies, not people: two hot replies from one person count as 2.
- accounts created: signups in the period that Rainmaker could match to a specific lead. Signups it can't match are not counted here.
Reply intents
Rainmaker reads every reply and labels what it means. The Reply intents bar shows how many replies in the period got each label: Hot lead, Meeting request, Info request, Objection, Not interested, Out of office, Unsubscribed, Not now and Other. Replies that were never labelled are shown as "N unclassified". See Inbox and meetings for what each label means.
Recent replies and meetings
This list shows the newest events in the period first (up to 20):
- A reply shows the person, their company, the reply label and the first words of the reply.
- Meeting booked and Meeting cancelled rows. A meeting booked and cancelled in the same period shows up twice, once for each event.
- Created an account: a lead you contacted signed up.
Each row shows the campaign and the date. Unknown lead means Rainmaker has no name for that person. Click View inbox to open Inbox. If nothing happened in the period, you see No replies or meetings in this period.
Daily breakdown
The table lists each day in the period with Sent, Replies, Replies / sent, Meetings, Hot-lead replies and Accounts created, and a Total row. Replies / sent divides a day's replies by that day's sends, which is a different calculation from the reply rate in the tiles. On All, the chart and table show at most the last 90 days. When your history is longer, a note says so and the table totals are smaller than the tiles, which count everything.
When Home can't load
While a part of the page loads, you briefly see a message such as Loading dashboard, Loading your getting-started checklist or Reading the pulse.
- Pulse temporarily unavailable: the numbers could not be loaded. Nothing is wrong with your campaigns. Click Retry.
- Select a workspace: you are signed in but no workspace is selected. Click Select workspace and pick the workspace you were invited to.
Health chips in the sidebar
Small chips under the workspace switcher in the sidebar summarize your setup at a glance: 1 mailbox healthy, 1 mailbox needs re-auth, 2 LinkedIn seats, 1 LinkedIn seat needs re-auth, and 3 signal types this month (how many different signal sources found something in the last 30 days). A red "needs re-auth" chip means you should reconnect that mailbox or LinkedIn account. See Channels: your mailbox and LinkedIn.
The notifications bell
The bell next to the Rainmaker logo tells you about events that happen while you are on another page, such as Autopilot approvals, paused campaigns, hot replies and Ask actions you approved ("An action you approved is done" or "An action you approved failed"). See Notifications for every message and what to do. The weekly digest email is covered in Your account and workspace.
Insights
The page header reads Insights: "What outreach costs per qualified meeting, where leads drop off, and the policy changes learning proposes for review." From top to bottom it shows the Cost per qualified meeting beside the conversion funnel, a closed More numbers row, Campaign performance, What converts, a closed How we count row and a closed Automatic improvements row. Click a closed row to open it. Each part loads on its own, so if one fails, the others still show. While they load you briefly see Building your workspace economics, Working out what converts, Loading reply quality or Loading learning ledger.
The time window
One menu on the right of the header sets the period for the whole page. It offers Last 7 days, Last 30 days (the default), Last 90 days, each of the last six billing months, and All time. Costs are counted per billing month and What converts by rolling days, so each part follows the choice where it can:
| You pick | Cost, More numbers and Campaign performance | Conversion funnel | What converts |
|---|---|---|---|
| Last 7, 30 or 90 days | The current billing month | All time | That many days |
| A billing month | That month | Leads found in that month | The last 30 days |
| All time | The current billing month | All time | The last 30 days |
Each part names the period it shows, for example "Cost: billing month October 2026. Funnel: all time." above the cost, "Billing month: October 2026" above Campaign performance, and "Last 30 days" in What converts' description.
Cost per qualified meeting
The Cost / qualified meeting card shows the month's bill for your workspace divided by the qualified meetings booked that month ("-" when no qualified meeting was booked). Below the value it compares with the month before: "+12% vs prior", "No change vs prior", "New this period" (nothing the month before), "No change" or "No prior data". The conversion funnel sits beside it (see Conversion funnel).
The five other numbers are in the closed More numbers: contacted, replies, positive replies, meetings, qualified row under it. Contacted and Meetings compare with the month before in the same way.
| Number | What it counts |
|---|---|
| Contacted | Leads contacted for the first time that month. Each lead counts once, in the month you first reached them. Bills before November 2026 use this count; from November 2026 your bill counts leads found instead. |
| Replies | Replies received that month. The line underneath shows the reply rate: replies divided by leads contacted that month. |
| Positive replies | The share of labelled replies that were Hot lead or Meeting request, for example "3 of 12 classified". It shows "—" until there are enough labelled replies to be meaningful. |
| Meetings | Meetings booked that month, including ones later cancelled. |
| Qualified | Meetings booked that month that count as qualified, plus the month's bill so far underneath ("subscription spend"). |
A meeting is qualified when it was booked, the person accepted the invitation, it was not cancelled or disputed, and its start time has passed. The month's bill includes your plan, extra leads found, qualified meeting fees and extra sending channels. For prices and how the bill is built, see Billing and plan.
Conversion funnel
The conversion funnel, beside the cost card, shows your results in four steps: Found, Contacted, Replied and Meetings. Percentages are a share of leads found. It covers all time, unless you pick a billing month in the time window: it then shows the leads found that month, at the step each one has reached today, and Meetings counts people with a meeting (not cancelled) booked that month, which can include someone found earlier. If that month's funnel cannot be loaded, the all-time funnel shows instead and the cost line says "Funnel: all time".
- Found: every lead Rainmaker found that you did not reject.
- Contacted: leads that have been contacted or have replied.
- Replied: leads that replied.
- Meetings: people with at least one booked meeting that was not cancelled. This can include someone who booked without replying first.
With no leads yet, you see No leads yet ("Sourced leads flow through this funnel as campaigns run.").
Campaign performance
Campaign performance lists each campaign for the billing month named under its title: Campaign, Contacted, Replies, Meetings, Cost / lead and Cost / meeting. Campaigns with nothing contacted, no replies and no meetings are folded under Show N campaigns with no sends; click it to list them, and Hide campaigns with no sends to fold them again. Click a campaign name, or the arrow (Continue campaign), to open it. All campaigns opens the campaign list.
- Contacted is all-time for that campaign. Replies and Meetings are for the selected month.
- Cost / lead and Cost / meeting use only the extra cost that campaign caused: paid data lookups for its leads plus its qualified meeting fees. Your plan is billed once for the whole workspace and is not split across campaigns. The note in How we count says so, and shows any extra cost that belongs to no current campaign (for example a campaign that was deleted).
- "-" means there is nothing to divide by yet, for example no qualified meeting.
With no campaigns, you see No campaigns yet ("Approved buyer segments will appear here as campaigns."). If this part can't load, you see Economics temporarily unavailable ("Your sign-in may be valid, but Rainmaker could not load this month's costs. Try again in a moment.") with a Retry button.
What converts
What converts shows how replies and meetings land, per send, over the last 7, 30 or 90 days, as set in the time window (30 days when the window is a billing month or All time; the description names the window, for example "Last 30 days"). Three tabs on the title's line switch between its three tables:
- Campaign: each campaign's Sent, Replies, Meetings, Replies per send and Meetings per send. Replies received in the window count against sends made in the window, so a campaign that went quiet can still show replies.
- Channel: the same for Email and LinkedIn. A meeting counts toward the channel of the reply it was booked from, and only when that reply arrived inside the window. The note in How we count says how many meetings came from no such reply and appear in no channel row.
- Intent: for each reply label, Replies, Meetings, Share of replies and Replies that booked (the share of those replies that led to a meeting).
A row shows rates only once it has 50 sends in the window. Below that, the row says, for example, "not enough data yet — needs 38 more sends", because with few sends one reply would swing the rate a lot. Hover over the row for the same explanation ("A rate appears only once a row has 50 sends in the window..."). A row with 50 or more sends and no replies shows a real 0%. The reply-intent table uses your workspace's total sends for this check.
These rates are per send. The reply rate under More numbers is per lead contacted, and a lead usually gets more than one message, so the two numbers differ.
Empty states: No campaign activity in this window ("Widen the window, or wait for the first sends to go out."), No sends in this window ("Channel rates appear once outreach goes out.") and No classified replies in this window. If this part can't load, you see Breakdowns temporarily unavailable ("Your sign-in may be valid, but Rainmaker could not load what converts. Try again in a moment.") with a Retry button.
How we count
The closed How we count row holds the method notes for the numbers above it: how the conversion funnel counts, why campaign costs are marginal (with the month's plan cost and any extra cost that belongs to no current campaign), and, for What converts, how replies are matched to sends in the window and meetings to a channel.
Automatic improvements
The closed Automatic improvements row at the bottom of the page holds Reply quality and the learning sections described below: Suggested improvements (with Refresh and Evaluate policies), Safety guardrails, Policy proposals, Active policies, and Learning details and evaluation history. A link to one of these sections opens the row and scrolls to it.
Reply quality
Reply quality has two cards for the last 30 days:
- Involvement rate ("Inbound replies the agent drafted something for — how often it engages instead of staying silent."): of the replies you received, the share for which Rainmaker drafted an answer. Some replies, such as unsubscribes, never get a draft.
- Resolution rate ("Drafts sent unchanged — a live quality score for the reply agent."): of the reply drafts that were sent, the share sent without any edits.
Each card shows "—" until it has a few replies to work with, with No replies yet in this window. or, for example, Needs 3 more to show a rate. If the cards can't load, you see Reply quality could not be loaded.
Learning policies
On screen this part is headed Suggested improvements, inside Automatic improvements. Rainmaker records the choices it makes while it works, then checks which choices lead to qualified meetings. When one option is clearly better, it proposes a change for you to approve. It never applies a change by itself.
It compares three kinds of choice. On screen they are shown by their technical names:
| Shown as | What Rainmaker compares | Where it applies |
|---|---|---|
| sourcing lane | Finding people directly (People search) against finding companies first, using signals (Company and signal search) | Campaigns with Allow approved learning adjustments turned on |
| channel allocation | Email against LinkedIn | Campaigns with Allow approved channel adjustments turned on |
| web source | Which websites lead to good contacts | Campaigns with Learn source allocation turned on |
These switches are in each campaign's settings. When a switch is off, that campaign keeps its own split and a learned policy never changes it. When it is on, an approved policy can shift the split, but only within the campaign's limits. See Campaigns.
At the top of the section you see four numbers:
- Decisions ("Last 90 days"): choices Rainmaker recorded in the last 90 days.
- Attributed meetings ("Reversals included"): qualified meetings credited to those choices. A meeting that is later reversed is taken off again.
- Pending reviews ("Never auto-applied"): proposals waiting for a decision.
- Active policies ("Versioned"): approved policies currently in use.
Click Refresh to reload the section. If learning sharing is off for your workspace, a note says Anonymous cross-workspace learning is off. Workspace-only proposals continue normally. See Anonymous learning across workspaces.
When a proposal appears
Rainmaker evaluates automatically once a week, on Mondays. An Owner, Admin, Approver or Editor can also click Evaluate policies at any time. A proposal is created only when all of these are true:
- Your sending is healthy: the Safety guardrails badge says Passed. If too many messages bounced or were marked as spam over the last 90 days, it says Blocked and no proposal is made.
- At least two options each have enough data from the last 90 days.
- One option books qualified meetings at a clearly better rate than the next best, and the difference is large enough that it is unlikely to be chance.
- The better option does not cost noticeably more per decision.
- There is no other proposal of the same kind still waiting for a decision.
After you click Evaluate policies, you see one of these messages:
- 1 proposal ready for review. (or more): look at Policy proposals.
- No statistically useful policy change is ready yet.: nothing qualified. Check Evaluation history for the reason.
- No policy proposal was created because deliverability is outside the guardrail.: fix your delivery results first.
- Proposals could not be generated.: something went wrong. Try again later.
The Safety guardrails box ("Policy changes stop when deliverability crosses these limits.") shows the current Bounce rate, Complaint rate and Sent sample (messages sent in the last 90 days). With very few messages sent, the badge stays Passed.
Approve or decline a proposal
Policy proposals lists every proposal:
- Policy: which kind of choice it is, and when it expires ("Expires" date). A proposal expires 14 days after it is created.
- Configuration: Current: what is in use now (Default allocation means each campaign's own settings) and Proposed: the new split, for example "People search 40% · Company and signal search 60%". For web sources it shows Configured policy.
- Evidence: the winning option and its meeting rate, the likely range of that rate ("95% interval"), how many decisions it is based on ("n=") and an Evidence score. Higher means more certain.
- Cost delta: how much more or less the winning option costs per decision.
- Status: pending, approved, declined or expired.
To decide, click the check mark (Approve policy) or the X (Decline policy) on a pending row. Only Owners, Admins, Approvers and Editors see these buttons.
- Approving shows Policy approved and versioned. New decisions will use it. The new policy replaces the previous one of the same kind and gets a new version number.
- Declining shows Proposal declined. Nothing changes.
- The proposal could not be reviewed. means the request failed. Click Refresh and try again. A more specific message (such as "This proposal has expired. Run Evaluate policies to get a fresh one.") is explained in Why did approving a learning proposal show an error?.
If nothing is pending, you see No proposals yet ("Evaluate after both arms have enough production history"). "Arm" here just means one of the options being compared.
Roll back a policy
Active policies lists the policies in use, with their Version, Allocation and Approved date. If none is active, you see No active learned policy ("Campaign baselines remain in effect"), which means every campaign uses its own settings.
To undo an approved policy, click Roll back policy on its row. Rainmaker restores the version before it and shows Previous policy version restored. If it fails, you see The policy could not be rolled back. Click Refresh and try again. The button only appears from version 2 onward, because version 1 has nothing before it. Only Owners, Admins, Approvers and Editors can roll back.
Evaluation history and observed choices
Evaluation history lists the last 20 evaluations, including the ones that made no proposal, with a Result and a Reason:
| Result | Reason shown | What it means |
|---|---|---|
| proposed | evidence threshold met | A proposal was created. |
| blocked | deliverability guardrail | Sending health was outside the safe limits, so nothing was proposed. |
| insufficient data | two arms required | Fewer than two options had enough data. |
| no change | no positive lift | No option did better than the others. |
| no change | intervals overlap | One option looked better, but not clearly enough. |
| no change | cost guardrail | The better option costs too much more. |
| no change | pending proposal exists | A proposal of this kind is already waiting for you. |
Observed arms lists every option Rainmaker has tried in the last 90 days: its Decisions, Meetings (credited qualified meetings), Reward (an overall score for the results it led to) and Cost. The small text under each option shows the region and country it applies to, or "all:all" for everywhere. Besides the three kinds above, this table can also show which kind of data source was tried first, such as Company register, Professional data provider or Web research.
Anonymous learning across workspaces
Workspaces can choose to share coarse, anonymous results so Rainmaker can learn across customers. It is off by default. An Owner or Admin can turn it on with Anonymous aggregate learning in Settings, Compliance. No contact data or workspace name is shared, and shared results only count once enough workspaces contribute. Your own proposals work the same either way. See Privacy and compliance.
Signals
A signal is a recent event at a company you are targeting, such as a funding round or a new job posting, with a link to where it was found. Signals help you write to someone at the right moment, and they also help Rainmaker pick which companies to search next.
What the Signals page shows
The page header reads Signals ("Evidence-backed events, from detection through approval handoff."). It shows signals from the last 30 days, newest first. Three numbers sit at the top: Recent signals (last 30 days), High confidence (80% or higher) and Drafts ready (signals that already have a draft in Review).
Each row shows:
- Company: the company's website, or its registered name, with the kind of source underneath (for example Buying signal, Company register or Web research).
- Signal: the type of event (see the table below).
- Detected: the date of the event.
- Confidence: how sure Rainmaker is that the event is real and about this company.
- Prospect handoff: whether the signal fed company search (see Statuses and what they mean).
- Draft handoff: whether a draft was made from this signal.
- Actions: Open source opens the page where the signal was found. Source link unavailable means there is no safe link to show.
| Signal type shown | What it means |
|---|---|
| funding | The company raised money. |
| hiring | The company posted jobs, found on its own careers pages or a jobs source. |
| news | The company published news or press, found on its own website. |
| incorporation and appointment | A new Spanish company, or a new officer at one, from the official company register. These appear only when a campaign targets Spain. Under the company name you see Found site: example.com, No site found yet or No site found, depending on whether Rainmaker found the company's website. |
| keyword eng and competitor eng | Public discussion that mentions the company together with a topic or competitor. |
Which types you get depends on what is available for your workspace, so you may not see every type.
Scan for signals
Rainmaker scans automatically once a day. It checks the companies of your leads and the companies on your Companies page. To scan right away, click Scan now. The button changes to Scanning while it runs, and you see Signal scan queued. Progress will update here.
The Latest scan box shows how the most recent scan is going (Waiting for worker, Scanning lead companies, Scan complete or Scan needs attention; see Signal scan). It also shows "N domains processed · N found · N new". A scan only keeps signals that are recent and confident enough to act on. A signal Rainmaker already has is not stored twice, so "found" can be higher than "new".
If you have no signals yet, you see No recent signals. That is normal for a new workspace or one with few leads.
Draft from a signal
To write to a lead because of a signal, click the pen icon (Draft from signal) on the row. Rainmaker drafts an email to the best-matching lead at that company, cites the signal as its source, and adds the email as the next step of that lead's sequence. You see Signal draft queued. Its approval link will appear here.
When the draft is ready, the row shows completed and a Review button. Click it to open the draft in Review, where an Owner, Admin or Approver approves it before anything is sent. A draft made from a signal follows the same rules as every other draft: every fact must be backed by a source, or the draft is blocked. See Review and approvals.
Other messages you may see:
- Signal drafting is already in progress.: a draft for this signal is already being written. Wait for it.
- This signal already has a reviewable draft.: click Review on the row.
- This signal no longer exists. Refresh the page.: the signal was removed. Refresh the page.
- Signal draft could not be queued.: something went wrong. Try again.
Drafting from a signal is always your choice: Rainmaker never drafts from a signal on its own.
Why a signal didn't produce a draft
If drafting was skipped, the row shows skipped with the reason, and the button becomes Retry signal draft:
| Reason shown | What to do |
|---|---|
| Signal is stale or below the confidence threshold. | Signals are for acting quickly. This one is too old or not confident enough to draft from. Wait for a newer signal. |
| Source contacts for this company before drafting. | You have no lead at this company yet. Find people there first (see Leads and companies), then click Retry signal draft. |
| The matching lead is not attached to a campaign. | The lead found has no campaign. Add the lead to a campaign, then retry. |
| No approved persona yet — approve one to draft from signals. | The campaign's buyer profile hasn't been approved. Approve it in the campaign, then retry. |
| The writer could not produce a grounded draft. | Rainmaker could not write an email that the signal fully supports. Retry later or write to the lead yourself. |
| The source signal no longer exists. | The signal was removed. Nothing to do. |
A short code instead of a sentence means the signal's source link could not be used safely, so no draft was made.
If drafting failed, the row shows the error. Click Retry signal draft to try again. Each retry is a new attempt.
Ask (if you see it)
Ask is an experimental chat about your own workspace. It is not turned on in every workspace. If you see an Ask tab next to Insights at the top of the Insights page, click it to open it. If you don't see it, Ask isn't available to you yet.
What Ask can answer
The page header reads Ask: "Ask about your campaigns, leads, meetings, and usage. Read-only — it can't send or change anything." Type a question in Ask a question… and press Enter or click Send (Shift+Enter adds a new line). Send stays greyed out while the box is empty or while Ask is answering. Click Stop to stop an answer. When you start, Ask greets you ("What should we work on?") and offers three questions under Suggested for you, such as What's my reply rate this month?, How is my funnel converting?, Any new intent signals this week?, Why are 4 drafts waiting for review?, What signals fired this week?, How are signups converting? or What's hot in my inbox?. Click one to ask it.
Ask reads your workspace to answer questions about your campaigns, meetings, funnel, reply rates and reply quality, signals, notifications, the review queue, sending health and experiments. Owners and Admins can also ask about usage and about replies. While it works, it says what it is doing, for example "Looking at your campaigns…", "Looking at your funnel…", "Checking signals…", "Checking the approval queue…", "Preparing a proposal…" or simply "Working…". Above each answer, a checked: row lists what it looked at, such as campaigns, meetings or funnel. Links in an answer open the page it refers to.
Ask can make mistakes. It is told never to state a number it didn't look up, and to say so plainly when it doesn't know. Use Good answer and Bad answer (thumbs up and down) under an answer to tell us how it did.
What Ask can look up depends on your role. If your role can't see something, Ask tells you it can't access it. A Viewer can open Ask, but Ask can't look up workspace data for them.
What Ask can't do
Ask never sends, approves, launches or changes anything by itself. If you ask it to rename a campaign, pause a campaign, change a campaign's sourcing direction or change its daily budget, it can only file a proposal. The proposal waits under Proposed actions in Review ("Changes proposed in Ask. Nothing runs until you approve it here."), where an Owner, Admin or Approver approves or rejects it. Only Owners, Admins, Approvers and Editors can file proposals through Ask. If too many proposals are already waiting, Ask asks you to review those first. The bell tells you when an approved action is done or failed. See Review and approvals.
Threads
Every conversation is saved as a thread in the list on the left. Threads are private to you. Click a thread to reopen it, or New thread to start fresh. Before your first question, the list says Your conversations will appear here. If a thread can't be saved, Ask still answers, but that conversation won't appear in the list. If your thumbs up or down can't be saved, the button simply switches back.
Ask messages
- You've asked a lot recently — give it a minute.: you sent many questions in a short time. Wait a few minutes, then ask again.
- Ask is unavailable right now. Try again in a moment.: Ask could not answer. Try again shortly.
- That thread isn't available.: the thread doesn't exist or isn't yours. Ask returns to a new conversation.
- Loading Ask appears briefly while the page opens.
Statuses and what they mean
Signal scan
| Status | What it means | What you can do |
|---|---|---|
| queued (Waiting for worker) | The scan is waiting to start. | Wait. The page updates by itself. |
| running (Scanning lead companies) | The scan is checking your companies. | Wait. |
| completed (Scan complete) | The scan finished. | Look at the new rows. |
| failed (Scan needs attention) | The scan stopped with an error, shown underneath. | Click Scan now to try again. |
Draft handoff (drafting from a signal)
| Status | What it means | What you can do |
|---|---|---|
| Not drafted | No draft was requested for this signal. | Click Draft from signal. |
| queued | Drafting is waiting to start. | Wait. |
| running | Rainmaker is writing the draft. | Wait. |
| completed | A draft is in Review. | Click Review. |
| skipped | Rainmaker didn't draft, for the reason shown. | Fix the reason, then Retry signal draft. |
| failed | Drafting hit an error. | Click Retry signal draft. |
Prospect handoff
| Status | What it means | What you can do |
|---|---|---|
| pending | The company isn't on your Companies page yet. A campaign that searches companies first can use it. | Nothing. It is used automatically. |
| matched | The company is already on your Companies page. | Nothing. |
| consumed | A campaign's company search used this signal to find a lead. | Look for the lead in that campaign. |
| Not applicable | The signal has no website, so it can't feed company search. | Nothing. |
Learning policy statuses
| Status | What it means | What you can do |
|---|---|---|
| pending | A proposal is waiting for a decision. | Approve or decline it before it expires. |
| approved | The proposal became an active policy. | Roll it back later if needed. |
| declined | Someone declined it. | Nothing. |
| expired | Nobody decided within 14 days. | Wait for the next evaluation. |
| Passed / Blocked (Safety guardrails) | Whether sending health allows new proposals. | If Blocked, improve delivery first. |
Troubleshooting
- Why is there a red banner on Home?
- Why does Home say the daily outreach cap is reached?
- Why does Home show no numbers?
- Why is my reply rate on Home over 100%?
- Why don't the reply rates on Home and Insights match?
- Why does Cost / qualified meeting show a dash?
- Why does What converts say "not enough data yet"?
- Why aren't there any learning proposals?
- What happens when I approve a learning policy?
- Why can't I approve, decline or roll back a learning policy?
- Where is the Signals page?
- Why are there no signals?
- Why didn't my signal produce a draft?
- Why don't I see Ask?
- Can Ask change my campaigns?
Related tutorials
Questions about home, insights and signals
- Why is there a red banner on Home?
- Why does Home say the daily outreach cap is reached?
- Why does Home say I'm in test mode?
- Why does Home show no numbers?
- How do I get the getting-started checklist back?
- Why is my reply rate on Home over 100%?
- Why don't the reply rates on Home and Insights match?
- Why does Cost / qualified meeting show a dash?
- Why are Meetings and Qualified different on Insights?
- Why does What converts say "not enough data yet"?
- Why does Reply quality show a dash?
- Why does a section of Home or Insights say it is unavailable?
- Why aren't there any learning proposals?
- What happens when I approve a learning policy?
- Why can't I approve, decline or roll back a learning policy?
- Why did approving a learning proposal show an error?
- Where is the Signals page?
- Why are there no signals?
- Why does the signal scan say "Scan needs attention"?
- Why didn't my signal produce a draft?
- Why can't I click Scan now or Draft from signal?
- Why don't I see Ask?
- Can Ask change my campaigns?
- Why does Ask say I've asked a lot recently?
- Why can't Ask answer my question about usage or replies?
- Why does Top titles in a campaign's Audience box say No data yet?
Still stuck?
Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.
More of the user guide
- Getting started25 min read
- Campaigns38 min read
- Leads and companies29 min read
- Contacts and your LinkedIn network21 min read
- Review and approvals24 min read
- Sequences and sending32 min read
- Inbox and meetings29 min read
- Channels: your mailbox and LinkedIn25 min read
- Integrations and CRM13 min read
- Billing and plan20 min read
- Team and roles12 min read
- Settings16 min read
- Privacy and compliance14 min read
- Your account and workspace16 min read