Sequences and sending
How Rainmaker drafts a campaign, times each step, and sends approved emails and LinkedIn messages, plus every reason a message waits or stops.
A campaign's sequence decides when each message goes out. Its drafts decide what each message says. This guide covers both halves: how Rainmaker drafts a campaign, how you set the timing of each email and LinkedIn step, and what happens between approving a message and it reaching the prospect. It also lists every reason a message can wait, fail or stop, so you can answer "why didn't this send?" yourself.
The word "touch" appears in a few places on screen. A touch is one message in a person's sequence: one email step, or one LinkedIn note or message.
Where to find it and who can use it
Everything in this guide lives inside a campaign. In the sidebar, click Campaigns, open a campaign, and use its tabs: Overview (the numbers and approval mode), Leads (each person's progress and their sequence in the lead details), Drafts (drafting and reviewing this campaign's drafts), Inbox (the Sent and Failed lists) and Settings (its Sequence section holds the email timing and LinkedIn follow-up editors). Pause or Resume, the next step and the ⋯ menu sit at the top of every campaign tab. Drafts you approve live in Review (see Review and approvals).
| Action | Owner | Admin | Approver | Editor | Viewer |
|---|---|---|---|---|---|
| Draft sequence, Draft emails, Draft LinkedIn note | Yes | Yes | Yes | Yes | No |
| Edit and save the Sequence and LinkedIn sequence | Yes | Yes | Yes | Yes | No |
| Approve drafts | Yes | Yes | Yes | No | No |
| Launch, Resume, Retry a failed email | Yes | Yes | Yes | No | No |
| Pause a campaign | Yes | Yes | Yes | Yes | No |
| Change a mailbox's Daily cap | Yes | Yes | Their own mailbox | Their own mailbox | No |
| Remove an address from do-not-contact (misclassified unsubscribe) | Yes | No | No | No | No |
Editors cannot launch or resume a campaign, but they can stop one with Pause at the top of any campaign tab. Viewers can look but not change anything.
From draft to sent: the whole path
Every message follows the same steps:
- Draft. Rainmaker researches each eligible lead, writes their sequence, and checks every factual sentence against a source.
- Approve. The drafts wait in Review until someone approves them (or the campaign is on Autopilot).
- Launch. The campaign must be running. Its status chip reads Active or Listening.
- Wait for its turn. Each step has a delay, and email only goes out inside the campaign's sending window.
- Final checks. Just before sending, Rainmaker checks again that the person can still be contacted.
- Send. The email goes out from your connected mailbox, or the LinkedIn message from a connected LinkedIn account (or you send it yourself).
If a message is stuck, find the first step on this list that is not done. The sections below explain each one.
Drafting a campaign
Start drafting
Drafting starts by itself once a campaign has new leads: after a sourcing run that found people, after a search of the target companies you added, when you add a lead by hand, and after a CSV import once its leads are scored. Leads added from a CRM or from your LinkedIn network wait for you to start it. To start it yourself at any time, choose Draft sequence in the ⋯ menu at the top of the campaign; you see "Drafting queued. Progress will update as the worker completes it." Before anything has been drafted, the button at the top right reads Write drafts instead: it opens the campaign's Drafts tab, where you start the first run. You can also draft from a lead that has no drafts yet: open the lead from the Leads tab, and under Sequence click Draft emails (or Draft LinkedIn note for a lead that should start on LinkedIn). Both run the same campaign drafting.
If the button reads Drafting setup instead, research is not connected for your workspace yet. Clicking Draft sequence in that state shows "Research evidence is not connected. Review drafting setup before continuing." If drafting cannot start for another reason you see Drafting could not be queued.
Draft progress
While drafting runs, a bar shows "Drafting emails — 4 of 20 leads drafted", then "20 leads drafted · wrapping up…". When it ends, a message such as "20 sequences drafted" appears. Drafting works through a few leads at a time, so a large campaign takes a while; drafts appear in Review as each group finishes.
The campaign's progress steps show the Draft stage as "Drafting", "Queued", "12 messages" or "3 blocked".
Which leads get drafted
Rainmaker drafts a lead when all of these are true:
- The lead has been scored and is not rejected or already contacted.
- Its fit score is 60 or more. This threshold is the same for every campaign and cannot be changed. Three kinds of lead are drafted whatever their score: leads found at a company you added to the campaign as a target company, leads you added by hand, and leads imported from a CSV with Skip fitness scoring ticked (the last two show Unscored in the fit column). A lead whose fit shows a dash has not been scored yet and is not drafted until it is.
- Rainmaker found at least one verified source about the person or their company. It tries a second, wider search before giving up.
- The person is not snoozed, does not have an active meeting, and (in a campaign whose goal is getting people to create an account) has not already signed up.
- The lead does not already have a usable email draft.
For each lead, Rainmaker writes the opening emails (normally three steps) in the lead's language, chosen as described in Draft language.
The lead's Method decides the channel. Email first leads get emails; LinkedIn first leads (because of the campaign's channel mix, or because they have a LinkedIn profile but no sendable email: "No sendable email yet, so outreach starts on LinkedIn.") get a LinkedIn sequence; On hold leads ("This lead has no verified email and no LinkedIn profile, so nothing can be sent yet.") get nothing. You can change a lead's Method in its details (see Leads and companies). Leads that start on LinkedIn get a LinkedIn connection note and its follow-ups instead of emails. That needs a valid LinkedIn profile link. Rainmaker drafts LinkedIn sequences for up to 25 new leads per workspace per day; the rest are picked up by a later drafting run.
Draft language
Rainmaker drafts in 23 languages: English, French, German, Spanish, Italian, Dutch, Portuguese (Portugal), Romanian, Polish, Czech, Slovak, Danish, Norwegian (Bokmål), Finnish, Swedish, Greek, Hungarian, Bulgarian, Croatian, Slovenian, Lithuanian, Latvian and Estonian. You can pick any of them for a campaign (Default draft language when you create it, Draft language in its settings) and for one person (Redraft in on the Review page).
Each lead's language is chosen in this order:
- The language picked for that person in Redraft in (see Request a redraft). It applies to all of that person's later drafts until someone picks Auto — lead's country/campaign there.
- The campaign's draft language, when it is set to one language.
- With Auto — match each lead's country, the language of the lead's country. Each language is used for its own country (French for France, Swedish for Sweden, Greek for Greece and so on); German is also used for Austria and Liechtenstein, Greek for Cyprus, and English for the US, the UK and Ireland.
- English in every other case: leads in Belgium, Switzerland and Luxembourg (each has more than one language, and Rainmaker cannot tell which one a person reads), leads in any other country, such as Malta or Iceland, and leads whose country is not known.
Leads that are not drafted
A lead is skipped, not failed, when:
| What you see on the lead | Why | What to do |
|---|---|---|
| Progress Not started after drafting finished | Fit score under 60, or no verified source was found | Check the fit score; add the company as a target company to override the score; or accept that there is nothing true to say yet |
| Progress Blocked | Every draft for this lead broke a sourcing rule | Click Draft sequence on the Leads tab (see below), or fix the drafts in Review |
| LinkedIn column Profile missing or Profile invalid | A LinkedIn-first lead has no usable profile link | Add a public profile link starting with linkedin.com/in/ |
| LinkedIn column Daily cap reached | Today's LinkedIn drafting limit is used up | Wait until tomorrow (UTC) |
| Snoozed until a date | The person asked you to come back later or is out of office | Nothing; drafting and sending resume after that date |
| Meeting booked | An active meeting pauses the person's outreach | Nothing, or Resume outreach if the meeting was cancelled |
Re-drafting a fully blocked lead
If every draft for a lead was blocked, that lead counts as not drafted. Choose Draft sequence in the ⋯ menu at the top of the campaign: the lead is drafted fresh, the new drafts replace the blocked ones, and the old blocked items leave Review. Leads with at least one usable, approved, sent or rejected draft are never re-drafted this way. To rewrite one person's pending drafts, use Request redraft in Review instead (see Review and approvals).
The email sequence
Open the campaign's Settings tab and its Sequence section ("When each touch goes out. Message text is in Drafts."); Edit sequence in the campaign's ⋯ menu opens it too. The Advanced section shows a read-only summary of the same sequence, with a link to Sequence.
Sending window
- Timezone: the timezone the window is measured in. Choices are UTC, America/New_York, America/Chicago, America/Denver, America/Los_Angeles, Europe/London, Europe/Paris, Asia/Singapore and Australia/Sydney.
- Start and End: the time of day sending may begin and must stop. End must be after Start.
- The days Rainmaker may send on, Mon to Sun. Tick at least one.
A new campaign sends Monday to Friday, 09:00 to 17:00 UTC. If its send times were never saved, launching it from Ready to send saves this window in your browser's time zone instead (when it's one of the choices above), and Launch shows when the first emails will go out. Email and automatic LinkedIn messages only go out inside this window. A message that becomes due outside it waits for the next open slot.
Steps and delays
The table lists each email step with its Channel (Email), its Delay in days, and a Status that counts that step's emails, for example "12 sent · 30 approved · 8 pending".
- Step 1 always goes out on day 0.
- Each later step must have a larger delay than the step before it, up to day 90.
- Click Add step to add a step (up to 8 in total; a new step defaults to 4 days after the last one), or the bin icon to remove one. Step 1 cannot be removed.
- A new campaign has three steps on day 0, day 3 and day 7.
A delay counts calendar days from the moment the email is approved, then snaps into the sending window. A step is also never sent before the person's previous step has gone out. Rainmaker drafts copy for the opening steps only. As the note under the table says, "Each step sets when a touch is sent, not its content. Rainmaker drafts copy for the opening touches; any extra steps set the cadence for signal-triggered follow-ups that append after the last drafted step."
Stop on reply and stop on meeting
- Stop on reply (on by default): when the person replies, their remaining approved emails and LinkedIn messages in this campaign are cancelled. A reply also pauses the same person's pending messages in your other campaigns, matched by email address. Automatic out-of-office replies do not stop the sequence; the person is snoozed instead and the sequence resumes after their return date.
- Stop on meeting (on by default): when a meeting with the person is booked, their remaining messages are cancelled. A cancelled meeting keeps outreach paused until someone clicks Resume outreach on the lead.
In a campaign whose goal is getting people to create an account, someone who signs up is always stopped too.
Saving and what it changes
Click Save changes at the top of the Sequence section. You see Sequence saved and pending sends rescheduled.
- Sent emails are not affected.
- Approved emails that have not gone out yet are rescheduled from the moment you save: each one becomes due its step's delay after the save, inside the new window.
- Drafts still waiting for approval are timed when they are approved.
The campaign's Settings tab shows the saved window as a chip such as "09:00–17:00 · UTC · 5 days/week" (or "Sequence could not be loaded." if it fails to load).
If you see Check the submitted values and try again., look for an end time before the start time, no day ticked, a first step not on day 0, or a step whose delay is not larger than the step before it. If you see Sequence could not be saved. after removing a step, some emails at that step are still drafted, waiting or approved. Reject them or let them send, then remove the step.
The LinkedIn sequence
Below the email steps, LinkedIn follow-ups sets the timing of LinkedIn follow-ups ("Delays count from the day the person accepts. Nothing sends before then.").
- The first row, Connection note, is "Sent on connect". Its tone is set in the campaign's settings.
- Each Follow-up row has Days after acceptance. Follow-ups must be in increasing order, up to day 90. Saving out of order is refused with "Each follow-up must be more days after acceptance than the one before it."
- Click Add follow-up (up to 4) or the bin icon. With none, the note reads "No follow-ups — notes only."
- A new campaign has three follow-ups, on day 0, 3 and 10 after acceptance.
- Click Save changes at the top of the Sequence section; it saves whichever of the email and LinkedIn sequences you edited. You see LinkedIn sequence saved. (or LinkedIn sequence could not be saved.).
Every follow-up is drafted together with the connection note, so you approve the whole LinkedIn sequence at once. Nothing after the note is sent until the person accepts the connection request.
Sending email
Where emails are sent from
Approved emails go out from a connected Google or Microsoft mailbox. The campaign's Settings tab, Sending section, chooses which connected mailbox. Follow-ups to a person come from the mailbox that sent them the first email (while it is still connected), and arrive in the same thread with the subject "Re:" plus the first email's subject. Connecting and managing mailboxes is covered in Channels: your mailbox and LinkedIn.
To launch a campaign, at least one email must be approved and a sending mailbox must be ready. Continue to send opens Ready to send, which asks for the mailbox first when none can send yet, then shows Launch campaign. See Connect your mailbox when you launch.
When an approved email is sent
An approved email is sent when all of these are true:
- The campaign is Active or Listening (not in review, not Paused, not Paused — budget reached).
- Its step is due: its delay has passed since approval, and the person's previous step has been sent.
- The time is inside the campaign's sending window.
- The person has not replied, booked a meeting or been snoozed (when stop on reply or stop on meeting is on).
- The final checks below pass.
- The mailbox and campaign are under their daily limits.
The campaign's status strip shows when the next run is due, for example "Next sending run ~in 2 h" (hover it for the exact time), or "No runs scheduled". Once a campaign has no emails left to send, its status changes to Listening: it keeps watching for replies.
On a lead, the Progress column shows the next one, for example "next: step 2 ~in 3 d" or "due now".
Find out why an email did not send
Work down this table. The first row that matches is your answer.
| Cause | How you can tell | Fix |
|---|---|---|
| Not drafted | The lead's Progress reads Not started or Blocked; under Sequence you see "No emails drafted for this lead yet" | See Which leads get drafted |
| Not approved yet | The step's badge reads Review; Progress reads Awaiting approval | Approve it in Review |
| Blocked | The step's badge reads blocked | See Final checks just before sending and Review and approvals |
| Campaign not launched | The status chip reads In review | Click Continue to send, then Launch campaign |
| No sending mailbox | Ready to send opens on its Mailbox step, or "A sending mailbox is required before this campaign can launch." | Connect a mailbox there, or in Settings, Email |
| Campaign paused | The chip reads Paused or Paused — budget reached; Home says "... is paused"; a "Deliverability paused a campaign" notification | See Automatic pauses, then Resume |
| Not its turn yet | Progress shows "next: step 2 ~in 3 d"; Why hasn't this sent? starts with Waiting: | Wait, or change the delays and sending window |
| Outside the sending window | Why hasn't this sent? highlights Sending hours | Wait, or widen the window in Sequence |
| Mailbox daily cap reached | Home says "Daily outreach cap reached for ..."; the panel highlights Mailbox daily limit | Wait for tomorrow (UTC) or raise the Daily cap |
| Mailbox disconnected or needs reconnecting | The mailbox shows Needs reconnecting in Settings, Email; the Inbox's Failed view says "sending credentials were rejected" | Reconnect the mailbox; waiting emails resume |
| No From name | Home says "Sending is off: your sender name, company, and postal address aren't set." | Set your From name under Identity & signature |
| Person opted out or unsubscribed | The step changes to blocked; the panel highlights Opt-outs | Nothing to fix: Rainmaker never emails someone who opted out |
| Address not verified as valid | The step changes to blocked; the panel highlights Address check; the draft's To: badge reads Invalid address or Unverified | Find a valid address for the person, or reach them on LinkedIn |
| Recipient outside your markets | The step changes to blocked; the panel highlights Market rules: "Your market settings don't allow emailing this person's country. Review Settings → Compliance." | Activate that market in Settings, Compliance |
| Country still being detected (people added from your LinkedIn network) | The lead's country reads Detecting country…; the panel starts with Waiting: on Market rules | Nothing; the email stays approved and goes out once the country is known |
| Person replied, booked or is snoozed | Progress reads "Sequence stopped - prospect replied" (or a meeting), or Snoozed until a date | Nothing; this is on purpose |
| Mail service refused it | The step reads send failed; it is listed in the Inbox's Failed view | Read Why, fix, Retry |
| Free trial ended | Banner "Your free trial has ended. Subscribe to keep sourcing, sending, and connecting LinkedIn." | Subscribe in Settings, Billing |
Final checks just before sending
Moments before each email goes out, Rainmaker re-checks the person. If a check fails, that email is stopped and marked blocked, even though you approved it:
- Email address verification. Only addresses verified as valid are sent to. A verification older than 30 days is redone first, which can delay the email a little. An address that is invalid, a catch-all, or cannot be confirmed is blocked.
- Do-not-contact and opt-outs. If the person unsubscribed, asked not to be contacted, or is on your workspace's do-not-contact list, the email is blocked. This check runs twice, the second time right before handing the email over, so a last-second opt-out still wins.
- Market rules. The person's country must be one of your workspace's active markets. For European recipients, your company's details and data-source disclosure must be set up in Settings, Compliance (a privacy notice address is not required). Otherwise the email is blocked. For people added from your LinkedIn network, an email waits while their country is being detected; someone outside the campaign's markets is never emailed, and someone whose country couldn't be found gets the strictest (European) rules.
A blocked email is never sent and is not retried automatically. On the lead it shows blocked; in Review its card shows Blocked.
What every email includes
Rainmaker adds the same footer to every outreach email and every reply, in every market. You can preview it on any draft in Review under Appended when this sends: signature & compliance footer:
- A separator line, then your signature: your name, your role and company ("Head of Sales at Acme"), and your website. Lines you haven't filled in are left out. Edit these in Settings, Email, Identity & signature.
- The last line, always: "P.S. If this isn’t relevant, simply reply “NO” and I won’t follow up."
Emails carry no privacy notice link.
The signature's sign-off ("Best,") is followed by your sender name. Citation numbers never appear in the email the prospect receives.
Every email also carries a one-click unsubscribe header. Gmail, Outlook and other mail apps read it and show their own Unsubscribe button next to the sender. When a recipient clicks it, Rainmaker adds them to the global do-not-contact list. When they reply "NO" (with or without quote marks), as the P.S. line invites, Rainmaker adds them to your workspace's do-not-contact list; a reply that just says "stop" counts as an unsubscribe. Either way nothing more is sent to them. See Privacy and compliance.
Daily limits and budget
- Mailbox daily cap. Each connected mailbox has a Daily cap: the most emails it sends per day across all campaigns. The default is 50; you can set 1 to 500 in Settings, Email (click the mailbox's row under Mailboxes), and click Save ("Saved.", or "Enter a number between 1 and 500."). When a mailbox reaches its cap, its remaining emails simply wait for the next day. The campaign is not paused. Replies you send from the Inbox do not count against this cap.
- Max emails per day. A campaign can have a Max emails per day limit (required on Autopilot). Once the campaign has sent that many emails in a day, it stops sending and its status becomes Paused — budget reached. Approved emails keep their place. Click Resume when you are ready; sending does not restart by itself.
- Monthly spend cap. The workspace owner can set a Monthly spend cap in Settings, Operations, under Spend controls. It applies across every campaign; once reached, sending pauses the same way.
Daily counts reset at midnight UTC.
When an email fails
If the mailbox provider refuses an email, its status becomes send failed. Rainmaker retries it automatically after 5 minutes, then waits three times longer after each new failure (up to a day between tries). Failed emails are listed in the campaign's Inbox, in the Failed view under More (the Overview shows "N failed" under Sent; click it to go there). Each row shows the Lead, Campaign, Step, When and Why.
Click Retry to try again right away (it reads Retrying… while it works). You see "Queued for retry — it will send on the next pass, subject to the usual caps and send window." Retry does not skip any check. If the retry cannot be queued: "The retry could not be queued — check your connection and try again." If you see "The retry may have been queued, but the inbox could not refresh — reload to check.", reload the page. When nothing has failed, the tab reads "Nothing has failed. Good."
The Why column explains the failure in plain words:
| Why | What it means | What to do |
|---|---|---|
| "The email service refused this send: sending domain not verified." | Your sending domain is not verified with the mail service | Check the mailbox connection in Settings, Email |
| "The email service refused this send: sending credentials were rejected." | The mailbox connection was refused | Reconnect the mailbox, then Retry |
| "The email service is rate-limiting sends right now — retrying will pick it back up." | Too many sends at once | Nothing; it retries |
| "The email service was temporarily unavailable — retrying will pick it back up." | A temporary outage | Nothing; it retries |
| "The email service rejected this send (HTTP 4xx)..." | The service refused this message for the reason shown | Read the reason; fix and Retry |
| "The send failed, but no reason was recorded." | No reason was available | Retry; contact support if it keeps failing |
Why hasn't this sent?
For an approved or failed email whose time has come, the lead details show a Why hasn't this sent? link under that step (click again to Hide explanation). It runs through every check Rainmaker makes before sending, in order, and highlights the first one that is not passing. The headline starts with Held back: (something must change) or Waiting: (nothing is wrong; it is just not time yet, for example outside the sending hours, the address is being checked, the person is snoozed, or their country is still being detected), followed by the reason in plain words. If every check passes, the headline reads "Every check passes — this email goes out on the next send run."
Each check has a label and one sentence, for example:
| Label | When it is holding the email back |
|---|---|
| Sending setup | "Sending isn't fully set up yet. Check your From name in Settings → Email." |
| Approval | "This email isn't approved (or was already handled), so it won't send. Approve it in Review." |
| Scheduled time | "It is scheduled for later and will send then." |
| Earlier emails | "An earlier email to this person hasn't been sent yet; emails always go out in order." |
| Campaign status | "The campaign isn't sending (it may be paused or not launched yet). Launch or resume it on its Overview." |
| Sending hours | "It is outside the campaign's sending hours; it will send when they next open." |
| Delivery health | "Too many emails bounced or were marked as spam, so the campaign was paused to protect your sender reputation." |
| Sending mailbox | "The sending mailbox needs reconnecting. Go to Settings → Email." |
| Email address | "This person has no usable email address." |
| Snooze | "This person is snoozed; the email waits and sends once the snooze ends." |
| Market rules | "Your market settings don't allow emailing this person's country. Review Settings → Compliance." |
| Address check | "The email address couldn't be verified as deliverable, so it won't be emailed." or, while it is checked, "The email address is being checked; it sends once the check passes." |
| Opt-outs | "This person opted out or is on your do-not-contact list, so they won't be emailed." |
| Daily email limit | "The campaign's daily email limit (or the workspace's monthly spend cap) is reached for now." |
| Mailbox daily limit | "The sending mailbox has reached its daily limit; the email goes out tomorrow." |
Other checks are Campaign, Sequence settings, Stop on reply, Stop on meeting, Channel, Sending now, Sequence step and Sequence stopped. If the panel cannot load you see "This touch's send status could not be explained."
If the reason is an unsubscribe that Rainmaker recorded by mistake (for example from a quoted reply), the workspace owner sees Misclassified unsubscribe and a button Remove from do-not-contact (misclassified unsubscribe). Read the person's actual reply before using it.
Automatic pauses
Rainmaker pauses a campaign on its own in these cases. The status chip reads Paused (or Paused — budget reached):
- Deliverability safeguard. When Rainmaker receives bounce and spam-complaint reports for a campaign, it pauses the campaign once at least 20 emails have gone out and more than 3% bounced or more than 0.1% were marked as spam. You get a notification, "Deliverability paused a campaign" with the rate that tripped it, and Home shows a red line such as "... is paused to protect your sending reputation — too many messages bounced recently." If the whole workspace's bounce or complaint rate becomes unhealthy, all its active campaigns are paused at once. Fix the cause (usually a bad list), then Resume. This safeguard reads the bounce and spam-complaint reports that Rainmaker's own sending service receives. Emails sent from your own connected mailbox don't produce these reports, so for those the safeguard does not pause anything: watch your mailbox for bounce messages instead.
- Budget reached. See Daily limits and budget.
- A sending mailbox or LinkedIn account was removed. If a campaign's chosen mailbox or chosen LinkedIn account is disconnected, campaigns that were sending from it are paused, so they never start sending from a teammate's account. Pick a new sender on the campaign's Settings tab, Sending section, then Resume. Campaigns that had not started yet switch to the workspace default.
- A broken sequence. If a campaign's saved sequence becomes invalid, the campaign pauses. Open Settings › Sequence, fix it, save, and resume.
If a connected mailbox stops working without being removed (for example it needs reconnecting), emails wait or fail until you reconnect it. Reconnecting picks up the waiting emails automatically.
Messages on Home about sending
When sending has stopped, Home shows it in a red band at the top, with a link to the fix:
| Message on Home | What to do |
|---|---|
| "Sending is off: your sender name, company, and postal address aren't set." | Set your From name in Settings, Email, Identity & signature. Sending resumes on the next run. |
| Other lines starting "Sending is off:" (about the app's public address or the key that signs unsubscribe links) | These are set up by Rainmaker, not by you. Contact support. |
| "... is paused — nothing is going out." | The campaign was paused. Click Resume on it when ready. |
| "... is paused — it reached its daily email limit." | See Daily limits and budget. |
| "... is paused to protect your sending reputation — too many messages bounced recently." (or "too many people marked your messages as spam", or "your recent delivery results crossed the safety threshold") | See the deliverability safeguard above. |
| "... stopped after an error on its last run." | Open the campaign's Activity page (in Campaigns, the failed campaign's next-step link opens it); contact support if it repeats. |
| "Daily outreach cap reached for ... — N of M used today. New sequence emails wait until tomorrow, or raise the cap. Replies still send." | Wait for tomorrow (UTC) or raise the mailbox's Daily cap. A blue "Nearly at the daily outreach cap ..." line warns you first. |
| "N approved LinkedIn messages are waiting on ... — LinkedIn sending is turned off." | Turn LinkedIn automation on, or send them yourself. |
| "Test mode (dry-run) — emails compose and log but nothing delivers." or "Test mode (mock sender) — nothing is actually sent." | Your workspace is in a test mode where nothing is delivered. Contact support to go live. |
When your free trial ends
When your free trial ends without a subscription, sending stops for the whole workspace. The banner reads "Your free trial has ended. Subscribe to keep sourcing, sending, and connecting LinkedIn." Subscribe in Settings, Billing and sending resumes. During the trial you can send from one mailbox; there is no separate daily sending limit for trials. See Billing and plan.
Sending on LinkedIn
Automatic sending
LinkedIn automation is on by default for every workspace. An approved LinkedIn message is sent for you when:
- The workspace switch in Settings, LinkedIn reads Automation on.
- A connected LinkedIn account is available and its own switch is on (the account shows Automated, not Automation paused). LinkedIn accounts need a paid plan.
- The campaign is Active or Listening, and it is inside the campaign's sending window.
- For a follow-up: the person has accepted the connection request and the follow-up's days after acceptance have passed.
- The account is under its daily limit.
- The person has not replied or booked a meeting.
Which account sends is set on the campaign's Settings tab, Sending section: All connected LinkedIn accounts (rotate) or one chosen account. A person's messages always come from the account that started the conversation. People added from someone's own LinkedIn network are only ever messaged from that person's account. Account settings are covered in Channels: your mailbox and LinkedIn.
Sending LinkedIn messages yourself
When automation is off, or no account can send, approved LinkedIn messages wait. Nothing is dropped. You can send them yourself: copy the note, send it on LinkedIn, then record it with Report sent in Review or Mark sent on the LinkedIn tab, and press Mark accepted when the person accepts. See Review and approvals.
Daily LinkedIn limits
- Each LinkedIn account sends up to 25 messages per day by default. The person who connected the account, or an owner or admin, can set a Daily cap override for it in Settings, LinkedIn (blank means the default of 25).
- Messages you report as sent by hand count against the same daily budget, so one person's LinkedIn is never used twice over.
- Reporting manual sends stops at the workspace's daily LinkedIn limit: "The LinkedIn reporting cap has been reached for today."
- Drafting covers up to 25 new LinkedIn leads per workspace per day.
Limits reset at midnight UTC. Messages over the limit wait for the next day.
When LinkedIn messages wait
The campaign's Leads tab shows a notice when approved LinkedIn messages are waiting:
- LinkedIn automation is off for this workspace: "N approved LinkedIn messages are waiting. Nothing will be sent until you turn automation on, or send them in LinkedIn yourself and mark them sent." The button LinkedIn settings takes you to the switch.
- This campaign's LinkedIn account is paused or needs reconnecting: the campaign is set to send from one account, and that account cannot send. "Nothing is sent from another account instead: reconnect it or turn it back on in Settings → LinkedIn, or pick another LinkedIn account in this campaign's settings." Use Sender settings.
- LinkedIn messages to people from "Name"'s network are waiting: those people can only be messaged from that teammate's account, which cannot send right now.
Sends that were never confirmed
Very rarely, a LinkedIn message is handed to LinkedIn but Rainmaker never hears back whether it arrived. That message shows Send unconfirmed with the note "Dispatch outcome unknown — this send may or may not have reached LinkedIn. Check the conversation in LinkedIn, then re-approve it only if nothing was sent." The Leads tab shows Some LinkedIn sends were never confirmed, with Show them to list the people.
Rainmaker never retries these on its own, because a retry could send the same person a second invitation. Open the conversation on LinkedIn and check. If the message is not there, send it yourself on LinkedIn.
Failed LinkedIn sends
If LinkedIn refuses a message, it shows Send failed with LinkedIn's reason underneath, and Rainmaker tries again later while an account can send. If LinkedIn cannot find the person or the conversation, the message is marked Blocked instead and is not retried. If several sends in a row fail from one account, Rainmaker pauses automatic sending from that account and explains why in Settings, LinkedIn; you get a notification "A LinkedIn account stopped working". Fix the cause, then use Refresh status on the account (or reconnect it).
Statuses and what they mean
Email steps on a lead
Open a lead to see each step of their sequence under Sequence, labelled Step 1, Step 2 (or Email step 1 and LinkedIn step 1 when a lead has both). Click a status badge to open the step's batch in Review.
| Status | What it means | What you can do |
|---|---|---|
| Review | Drafted, waiting for approval | Approve it in Review |
| blocked | Breaks a sourcing rule, or was stopped by a final check before sending | Fix or redraft it in Review; check the person's address and opt-out status |
| approved | Approved, waiting for its turn, the window, or the campaign to be active | Use Why hasn't this sent? once it is due |
| sending | Being sent right now | Nothing |
| send failed | The mailbox service refused it; it will retry | Check the Inbox's Failed view; Retry |
| sent | Delivered to the mailbox service | Nothing |
| rejected | Rejected, or cancelled because the person replied or booked a meeting | Nothing |
An email draft shown faded with "This lead has no usable email address, so this draft will not send. LinkedIn is the live channel." will never send. A step drafted in another language shows an English translation under the label English review; the original language is what sends. With no drafts yet, the section reads "No emails drafted for this lead yet" (or "No LinkedIn note drafted yet") with a Draft emails or Draft LinkedIn note button.
Changing a lead's Method asks you to confirm ("Change drafting method?" — "This changes what Draft sequence prepares for this lead."). It is refused with "This lead has no valid LinkedIn profile on file, so LinkedIn-first can't be selected. Add a LinkedIn profile URL first." or "This lead's email isn't verified as sendable, so Email-first can't be selected." when that channel cannot be used, and "The channel could not be changed." for other failures. A lead with neither channel shows "No verified email or LinkedIn profile — nothing can be sent for this lead yet."
Lead progress
The Progress column on the Leads tab shows each person's furthest point: Not started, Blocked, Drafted, Awaiting approval, Step N sent, Replied, Signed up, Meeting booked or Meeting cancelled. A second line shows the next send ("next: step 2 ~in 3 d", "due now"), or why it stopped: "Sequence stopped - prospect replied", "Sequence stopped - meeting booked", "Sequence stopped - meeting cancelled". Snoozed until a date means sending is paused for that person until then.
LinkedIn on a lead
| Status | What it means |
|---|---|
| Ready to draft | Can be drafted |
| Awaiting approval | Drafted, waiting in Review |
| Ready to send | Approved; waiting for automatic sending or for you to send it |
| Sent | Sent or reported sent |
| Send unconfirmed | Handed to LinkedIn, result unknown; check LinkedIn |
| Send failed | LinkedIn refused it; the reason is shown underneath |
| Blocked / Rejected | Will not send |
| Profile missing / Profile invalid | No usable LinkedIn profile link |
| Lead rejected | The lead was rejected |
| Daily cap reached | Today's LinkedIn drafting limit is used up |
| View only | Your role cannot draft |
Campaign numbers
The campaign Overview shows Sent (with "N failed") and Waiting to send ("Ready or scheduled"), and while drafts are blocked a chip such as "2 blocked · needs sourced revision". Campaign statuses such as Active, Listening and Paused are explained in Campaigns.
Troubleshooting
- Why didn't my email send?
- Why do some of my leads have no drafts?
- Why weren't LinkedIn notes drafted for some of my leads?
- Why did my approved email change to blocked?
- Why did my email fail to send?
- Why is my email waiting when the campaign is active?
- Why won't my sequence save?
- Does saving the sequence change emails that are already scheduled?
- Why did two emails reach the same person close together?
- Why does my follow-up email have a "Re:" subject?
- Why did the sequence stop for a lead?
- Why did the deliverability safeguard pause my campaign?
- What happens to approved emails when my mailbox stops working?
- Why didn't my LinkedIn connection request or follow-up send?
- Why aren't my LinkedIn follow-ups sending after the connection request?
- What does "Send unconfirmed" mean on a LinkedIn message?
- What does "Send failed" mean on a LinkedIn message?
- How many emails and LinkedIn messages can Rainmaker send per day?
- What does Rainmaker add to the bottom of every email?
- How can a recipient unsubscribe from my emails?
- What does "Why hasn't this sent?" show on a lead?
- Why does a lead's email draft say it will not send?
Related tutorials
Questions about sequences and sending
- Why didn't my email send?
- Why do some of my leads have no drafts?
- Why weren't LinkedIn notes drafted for some of my leads?
- Why did my approved email change to blocked?
- Why did my email fail to send?
- Why is my email waiting when the campaign is active?
- Why won't my sequence save?
- Does saving the sequence change emails that are already scheduled?
- Why did two emails reach the same person close together?
- Why does my follow-up email have a "Re:" subject?
- Why did the sequence stop for a lead?
- Why did the deliverability safeguard pause my campaign?
- What happens to approved emails when my mailbox stops working?
- Why didn't my LinkedIn connection request or follow-up send?
- Why aren't my LinkedIn follow-ups sending after the connection request?
- What does "Send unconfirmed" mean on a LinkedIn message?
- What does "Send failed" mean on a LinkedIn message?
- How many emails and LinkedIn messages can Rainmaker send per day?
- What does Rainmaker add to the bottom of every email?
- How can a recipient unsubscribe from my emails?
- What does "Why hasn't this sent?" show on a lead?
- Why does a lead's email draft say it will not send?
Still stuck?
Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.
More of the user guide
- Getting started25 min read
- Campaigns38 min read
- Leads and companies29 min read
- Contacts and your LinkedIn network21 min read
- Review and approvals24 min read
- Inbox and meetings29 min read
- Channels: your mailbox and LinkedIn25 min read
- Integrations and CRM13 min read
- Home, Insights and signals33 min read
- Billing and plan20 min read
- Team and roles12 min read
- Settings16 min read
- Privacy and compliance14 min read
- Your account and workspace16 min read