Skip to content
Rainmaker
Language EN
Log inTry it free
Try it free · 7 daysPricing
Help centerUpdated · 29 min read

Leads and companies

Fill a campaign with people who fit, see why each one was chosen, add your own contacts and target companies, and decide which companies Rainmaker should keep looking at.

Every campaign has its own list of leads: the people Rainmaker will draft messages for. Rainmaker can find them for you, you can add people you already know, and you can point it at specific companies. This guide covers the campaign's Leads tab, target companies and the Companies page. Your own LinkedIn connections have their own guide: Contacts and your LinkedIn network.

Where to find it and who can use it

  • Leads tab. In the sidebar, click Campaigns, open a campaign, then click the Leads tab.
  • Companies page. In the sidebar, click Contacts, then the Companies tab at the top. The page heading reads Contacts, as on the other Contacts tabs.
  • Contacts page. In the sidebar, click Contacts to see every lead across all campaigns, one row per person. See Contacts and your LinkedIn network.

What each role can do:

ActionOwnerAdminApproverEditorViewer
See leads, lead details, companiesYesYesYesYesYes
Source more, add or import leads, reject leadsYesYesYesYesNo
Add target companies, Search again, RemoveYesYesYesYesNo
Accept or reject companies, Add companyYesYesYesYesNo
Export CSVYesYesNoNoNo

A Viewer sees the same pages with the action buttons hidden or greyed out. If someone tries an action their role does not allow, Rainmaker says Your role is not allowed to perform this action. See Team and roles.

The Leads tab at a glance

The page heading says Leads, with the line "Verified prospects ranked by fit, with the reasoning and signals behind every score."

From top to bottom you will find:

  1. The campaign's progress strip, with stages such as Target, Contacts, Draft and Approve. The Contacts stage shows how many leads were sourced, or what it is waiting for: Add contacts, Queued, Sourcing, Pick a segment first or Setup required.
  2. Notices about sourcing, setup and LinkedIn sending, when there is something to say.
  3. Sourcing progress: one card per search method, Why these leads and Audience, after a run.
  4. Target companies: the companies you picked for this campaign.
  5. The lead list, or an empty state when the campaign has no leads yet.

Buttons at the top

Once the campaign has at least one lead, the campaign header shows Source more at the top right, next to Pause and the next step, and its ⋯ menu holds the other two:

  • Source more: find more leads. It shows Starting while the request goes in and Sourcing while a run is working.
  • Draft sequence (in ⋯): draft messages for the leads that are ready. See Sequences and sending.
  • Export CSV (in ⋯): download the campaign's leads (Owner and Admin only).

If live sourcing or drafting is not available, Source more is replaced by Sourcing setup and Draft sequence by Drafting setup. Both open Settings, Integrations.

When the campaign has no leads yet

The empty state tells you what is going on:

HeadingWhat it meansWhat you can do
No leads yetNothing has been added and no run is working.Click Run prospector or Add contacts.
Sourcing contactsA run is working. Contacts can take a few minutes to appear after they are found.Wait. The page updates by itself. No buttons are offered, so you cannot start a second run on top of the first.
Add contacts to continueLive sourcing is not available right now.Click Add contacts to type in a person or import a CSV.

Sourcing leads with the prospecting agent

Rainmaker's prospecting agent looks for new people who fit the campaign's buyer segment: their job titles, industries, company size and markets. It finds them through public company registers, professional data providers and public web pages, checks each email address, and scores each person against the segment.

Start a run

  1. Open the campaign's Leads tab.
  2. Click Source more. On a campaign with no leads yet the button is called Run prospector.
  3. In the Source more window, choose Rainmaker prospecting agent ("Find new people who fit this campaign's ICP, as the prospector always does").

The window closes and a green notice says Lead sourcing queued. This page will update automatically. If a run was already waiting, it says Lead sourcing is already queued. instead.

The other choice, Your LinkedIn network, adds people you are already connected to. It is covered in Contacts and your LinkedIn network.

How many people a run looks for, and how much it may spend on data, are set on the campaign's Settings tab under Advanced, Run size and budget (Candidates per run and Run data budget). See Campaigns.

The button is greyed out when:

  • your role cannot edit campaigns (Viewer);
  • a run is already starting or working;
  • the campaign has no segment. Hover the button to read Pick a segment first. or This campaign's segment no longer exists — pick one. A warning notice titled No segment selected or Campaign segment no longer exists has a Pick a segment button that opens the campaign's settings.

If you are taking the guided tour, the tour's first run is capped: the progress notice says First batch capped for the tour — up to 10 leads to start with.

While sourcing runs

While a run is working you see:

  • Sourcing is in progress: "The worker is sourcing, verifying, and scoring contacts. This page refreshes automatically."
  • Sourcing in progress, with a running timer, for example Running for 2:15. Sourcing usually finishes within a few minutes as verified contacts are saved.

You can leave the page. The run carries on, and the page updates every few seconds while you are on it.

If about six minutes pass with no contact saved, the notice changes to Sourcing is taking longer than expected: "It may have stalled. Retry to start a fresh run, or import a CSV to continue now." Click Retry sourcing to start a fresh run.

The two search methods

Rainmaker searches in two ways at the same time, and each one has a card on the Leads tab:

  • People-first searches directly for people with the segment's job titles in the campaign's markets.
  • Account and signal-first finds companies first, from public company registers and buying signals, then looks for the right people inside them. Its card has a View companies link that opens the Companies page filtered to this campaign.

Each card shows counts, such as 25 selected · 21 saved, and a badge:

BadgeWhat it means
queued, running or savingThe run is still working. Counts read still looking for contacts, 12 found · saving… or 25 selected · 4 saved so far. Nothing is final yet.
completedThis search method finished. Green when it saved at least one lead.
failedThis search method stopped. The card says No contacts could be found or enriched for this lane. or This lane stopped before its contacts were saved., with a short reason underneath when one was recorded.

When a card shows a data cost, for example $0.42 data cost, that is what the run spent on contact data for that search method.

When a finished card selected people who were not saved, it says how many and why, for example 4 of the selected contacts could not be saved: 3 had no verified email, 1 failed during enrichment. The reasons are:

Reason on the cardWhat it means
had no verified emailNo working email address could be confirmed.
were outside the campaign's marketsThe person is in a country that is not one of the campaign's markets.
were suppressed or unreachableThe person opted out, is on a do-not-contact list, or their address hard-bounced.
had an email that could not be verifiedThe address might work, but the check could not confirm it.
belonged to a company you rejectedYou rejected their company on the Companies page.
failed during enrichmentLooking up their details failed, or the run's data budget ran out first.
were still being processed when the run endedThe run ended before deciding on them.

Other card messages: This lane finished without finding any contacts., This lane selected contacts, but none of them could be saved. and Part of this lane's work did not complete; the contacts it did find were kept.

Why these leads

After a run that found anyone, the Why these leads box shows what happened to everyone the run looked at, for example latest run · 21 of 50 target saved:

  • Discovered: people the run found.
  • Out of geo: outside the campaign's markets.
  • No verified email: no confirmed address.
  • Blocked (contactability): opted out, on a do-not-contact list, or hard-bounced.
  • Quarantined: an address that could not be verified.
  • Scored: scored against your segment.
  • Saved: added to the lead list.
  • Errored: shown only when something failed.

Audience

The Audience box summarizes the leads in this campaign (rejected leads are left out) by Geography, Fit, Company size and Top titles. Fit bands are high (80 and above), medium (60 to 79), low (below 60) and unscored.

When sourcing stops

If a run fails, a red notice explains it. Each one has a button that opens the page with the run's details or the sourcing setup. The titles are:

  • Sourcing stopped or Sourcing needs attention: the run ended before saving anyone.
  • Sourcing budget blocked this run: the campaign's data budget is too low for the run.
  • A data source limit was reached: a data source asked Rainmaker to slow down. Completed work was kept.
  • A data source refused the search: one of the sources Rainmaker searches turned the request down.
  • Your free trial has ended — subscribe to keep sourcing or The free trial includes 50 sourced leads — subscribe to source more: the free trial limits stopped the run (see below).
  • Both discovery paths stopped: neither search method could return people.
  • Candidate processing stopped: people were found, but checking or scoring them failed.
  • AI scoring is blocked or AI scoring is unavailable: scoring could not run.
  • Sourcing storage needs repair: Rainmaker could not record the run.

On the free trial. While your workspace is on the free trial, a banner at the top of every page says, for example, "7 days left in your free trial — 50 leads, one mailbox, no LinkedIn seat until you subscribe." The 50 leads count every lead in the workspace, from every campaign and every source. When the workspace reaches 50, or once the banner says "Your free trial has ended. Subscribe to keep sourcing, sending, and connecting LinkedIn.", a new sourcing run adds nobody, and the Leads tab says why: The free trial includes 50 sourced leads — subscribe to source more ("Your workspace already has 50 leads. Once you subscribe, source again to find more."), or Your free trial has ended — subscribe to keep sourcing ("The leads you already have stay in this campaign. Once you subscribe, source again to find more."). Click Go to Billing in the notice (or Subscribe in the banner), subscribe, then run sourcing again. See Billing and plan.

What to do about each one is in the FAQ: What do the sourcing stopped messages on the Leads tab mean?

The lead list

The list is sorted by fit score, highest first. Leads that have no score yet, or were added without scoring, sit at the top.

Columns

ColumnWhat it shows
PersonName (or Unknown contact when there is none; click it to open the lead's details), a LinkedIn icon when there is a profile, the job title (or Title unavailable) and Why this lead.
CompanyCompany name or website, and the lead's country. For people added from your LinkedIn network it can read Detecting country…, Country unknown — strictest rules applied or Outside campaign markets (see How each person's country is set).
FitThe fit score from 0 to 100: green from 80, blue from 60 to 79, grey below 60. Unscored means nothing has scored this lead yet. A dash means you added the lead yourself without scoring.
SignalsThe first buying signal, plus +N when there are more.
EmailThe address (or No email), its verification status, and a phone number you can click to call when one is available.
MethodEmail first, LinkedIn first or On hold. Hover it for the reason.
ProgressWhere the lead is in the sequence. See Statuses and what they mean.
(last column)The lead's LinkedIn status, and a reject button.

A phone number appears only when phone numbers are turned on for your workspace (the Phone enrichment option under Settings, Compliance) and the number is not on a do-not-call list. Rainmaker never calls anyone; the number is for you to call.

Search and filter

  • Search leads looks through name, title, company, website, email and phone.
  • The status filter offers Active leads (the default, everything except rejected leads), All leads, Rejected leads and LinkedIn sends unconfirmed.
  • The count on the right, for example 42 results, is how many leads match.

If nothing matches, the page says No leads match the current filters.

You can move through the list with the up and down arrow keys, press Enter to open a lead and press Space to select it.

Fit score and Why this lead

Each lead gets a fit score from 0 to 100 against the campaign's segment. Click Why this lead under a name to read the reasons. Some reasons you may see:

  • Added manually by an operator — a known contact, not a sourced prospect.
  • Imported with fitness scoring skipped — treated as vouched and drafted regardless of score.
  • Found at a company you added to this campaign — drafted regardless of fit score.
  • Promoted from a phone-only contact — not yet scored against the persona.

Rainmaker does not draft messages for leads scoring below 60. Three kinds of lead are drafted whatever their score: people you added by hand, people imported or added from your network with Skip fitness scoring ticked, and people found at one of your target companies. For a walkthrough, see How to check a draft's sources and a lead's fit score.

Email status

Under each address the list shows how far Rainmaker trusts it:

StatusWhat it means
sendableVerified. Rainmaker can email this address.
staleNot verified yet, or the last check is out of date. Rainmaker checks it again before sending.
quarantinedThe check could not confirm it (for example a catch-all domain). Rainmaker does not email it.
blockedThe check found a real problem, or the person opted out. Rainmaker does not email it.
missingNo email address. The lead can only be reached on LinkedIn.

LinkedIn column

For leads with a LinkedIn profile, the last column shows a LinkedIn status: Ready to draft, Awaiting approval, Ready to send, Sent, Send unconfirmed, Send failed, Blocked, Rejected, Profile missing, Profile invalid, Lead rejected, Daily cap reached or View only. A short explanation appears next to it when a send failed. How LinkedIn sending works is covered in Sequences and sending and Channels: your mailbox and LinkedIn.

LinkedIn notices on the Leads tab

These warnings appear above the list when they apply:

  • LinkedIn automation is off for this workspace: approved LinkedIn messages are waiting until automation is turned on, or until you send them in LinkedIn yourself and mark them sent.
  • This campaign's LinkedIn account is paused or needs reconnecting: messages wait for that account and are never sent from another one. Sender settings opens the campaign's settings.
  • LinkedIn messages to people from "…"'s network are waiting: the account those people are connected to cannot send right now.
  • Some LinkedIn sends were never confirmed: click Show them to filter the list. Check each one in LinkedIn, then mark it sent. Rainmaker does not retry these, because a retry could invite the same person twice.

Lead details

Click a lead's name to open their details on the right. The panel is headed with the lead's name (or Unknown contact), title and company. You can move to the next or previous lead with the arrow keys or j and k. If the panel cannot load, it says Lead details could not be loaded. The panel shows:

  • Email and LinkedIn. The address with its status, and a LinkedIn profile link. When the address is stale, a notice says "Rainmaker couldn't verify this address. If you know it works, mark it valid — bounces from unverified addresses can hurt your sender reputation." with a Mark email as valid button. Use it only if you know the address works.
  • Score & signal. The Fit score, the signals and the reasons.
  • Method & progress. The Method dropdown sets which channel Draft sequence prepares next for this lead: Email first or LinkedIn first. A choice is greyed out when it is not possible, for example Email first — no sendable email or LinkedIn first — no LinkedIn profile. Changing it asks you to confirm (Change drafting method?). When neither channel works, the panel says No verified email or LinkedIn profile — nothing can be sent for this lead yet.
  • Sourced evidence. Facts Rainmaker found about the lead, each linked to its source, such as Company website, News coverage, Job posting or Funding announcement. Before drafting it says No verified claims yet — drafting will research this lead.
  • Sequence. The lead's drafted and sent messages with their status. With no drafts yet it offers Draft emails or Draft LinkedIn note. Sending details, including Why hasn't this sent?, are covered in Sequences and sending.
  • Basic information. Website, Country, Email status (valid, catch-all, invalid or unknown) and the Sourced date. For someone added from your LinkedIn network whose country is being detected, unknown or outside the campaign's markets, a line under Country explains what Rainmaker will do.

The panel may also offer sending the lead to HubSpot and replying on LinkedIn; see Integrations and CRM and Inbox and meetings.

Rejecting leads

Reject a lead when you don't want Rainmaker to contact them in this campaign.

  1. In the lead's row, click the reject icon (its label reads Reject and the person's name).
  2. To reject several at once, tick their boxes (or the box in the header to select every visible lead) and click Reject N.

A notice confirms it, for example 3 leads rejected. Rejected leads leave the Active leads view, are greyed out under All leads, and Rainmaker drafts nothing new for them. Rejections also count as feedback on lead quality. There is no button to undo a rejection.

Adding leads yourself

Click Add contacts (in the toolbar above the list, or in the empty state). The Add lead window offers two choices.

Type one lead manually

Choose Add manually to add a referral or a warm contact. Fill in:

  • First name (required) and Last name.
  • Email and LinkedIn URL: the form reminds you "Email or LinkedIn URL — at least one is required."
  • Title and Company.
  • Country (required): it sets which market rules apply. Use a two-letter code such as FR or US.
  • Channel: Auto, Email first or LinkedIn first.

Click Add lead (it reads Adding while it saves), or Cancel to go back. The confirmation says, for example, Jane Doe was added to this campaign. We'll verify the email before anything is sent. Without an email it says the person was added with a LinkedIn profile and no email address.

Leads you add by hand are not scored; they show a dash in the Fit column and are drafted regardless of score. If the country is not one of your workspace's active markets, the lead is still added, but Rainmaker will not contact them until that market is active. See Privacy and compliance.

Import a CSV

Choose Import CSV to upload a list.

  1. Click Download template to get a file with the right column headers and one example row.
  2. Fill it in. Rainmaker matches columns by their header name:
    • first name (or firstname)
    • last name (or lastname)
    • title (or job title)
    • company (or company name)
    • domain (or company domain, or website)
    • linkedin (or linkedin url)
    • country
    • email (or work email)
  3. Decide on Skip fitness scoring. The window explains: "Rainmaker doesn't draft emails or LinkedIn sequences for leads scoring below 60. If you want all your imported leads to be drafted regardless of score, tick this box." Left unticked, imported leads are scored and those below 60 are not drafted.
  4. Drag the file onto Drag and drop your CSV here (CSV files only), or click Choose file. The button reads Importing until the import finishes. Back returns to the two choices.

Each row needs a company website (or an email address Rainmaker can take the company website from), an email or a LinkedIn URL, and a country that is active for your workspace. A file can hold up to 1,000 rows and about 1 MB.

When the import finishes, a notice reports the result, for example 48 imported, 3 duplicates skipped, 2 rejected — 1: no company website (and none derivable from the email), 1: country missing or not activated for this workspace. The rejection reasons are:

  • row could not be read
  • no company website (and none derivable from the email)
  • no email and no LinkedIn URL
  • country missing or not activated for this workspace
  • contact previously opted out

A duplicate is someone already on this campaign's list (same email, same LinkedIn profile, or the same person). Imported addresses are verified before anything is sent.

Import from HubSpot or Pipedrive

When the campaign already has leads, the toolbar above the list has a CRM import:

  1. Pick HubSpot or Pipedrive in the first dropdown.
  2. In the second dropdown, choose US confirmed. Import CRM stays greyed out while it says Country unconfirmed. Contacts with no country in your CRM are treated as being in the US.
  3. Click Import CRM.

Rainmaker imports up to 1,000 contacts per click, with the same rules and the same result notice as a CSV import. The CRM must be connected first; see Integrations and CRM.

Exporting leads to CSV

Owners and Admins see Export CSV at the top of the Leads tab once the campaign has leads. Click it and your browser downloads the file; a notice says Export started.

The file holds this campaign's leads with their name, title, company, website, email, LinkedIn URL, country, status (rejected leads included), fit score, reasons, signals and the date added. It leaves out anyone who opted out or is on a do-not-contact list, and anyone with no email address, so LinkedIn-only leads are not in the export.

Target companies

Target companies are companies you pick for a campaign on purpose: a key account, a referral, a company you met at an event. Rainmaker searches each one for people with the campaign's job titles. The campaign's usual company size and location filters do not apply to a company you picked. People found this way are drafted whatever their fit score.

The Target companies section sits on the Leads tab, above the lead list. With none yet it says "No target companies yet. Add one here, or from the Companies page with "Add to campaign"." For a walkthrough, see How to add target companies to a campaign.

Add a target company

  1. In Target companies, click Add company.
  2. Type the Company website, for example acme.com, and click Continue. Rainmaker reads the company's name from the site (the button shows Reading website meanwhile).
  3. Check the Company name and the Country (a two-letter code such as FR or GB; it sets which market rules apply). Click Change to use a different website.
  4. Make sure This campaign is ticked under Add to campaigns, then click Add company.

The search starts right away, within the campaign's data budget. A notice confirms, for example Acme was added and accepted. Searching it now in this campaign.

Continue stays greyed out until you type at least three characters, and Add company until there is a name and a two-letter country.

If the company is already on your Companies page, the window says so: "… is already in your companies. Adding it marks it accepted and moves it to the top." or, for a company you rejected, "… is already in your companies and was rejected. Adding it marks it accepted again." Its name and country are then greyed out with the hint "Kept as it is for an existing company". The confirmation reads "… was already in your companies; it is accepted and moved to the top." or "… was already in your companies; it is accepted again."

If your workspace has no campaigns yet, the campaign list says No campaigns yet.

You can also add companies from the Companies page, including several at once. See Add companies to campaigns.

Target company statuses

StatusWhat it means
Searching…The search is waiting or running.
N people found · M added as leadsThe search found people; some or all passed the checks and joined the list.
N people foundPeople were found, but none passed the checks (for example no verified email).
No matching people foundNobody with the campaign's job titles was found.
No more people found at this companyA repeat search found nobody new: everyone matching was already found.
Search failedThe search could not run. A short reason may follow, for example Search failed: This company was rejected or has no website, so it was not searched.

Each row also shows the company's website (or No website) and country.

Search again and Remove

  • Search again looks for people at that company who were not found yet. It is hidden while a search is running.
  • Remove takes the company off this campaign's target list. Leads already found stay.

The Companies page

The Companies tab (in the sidebar, Contacts, then Companies) lists every company that has come up in your campaigns, plus companies you added by hand. The description reads: "Rejected companies won't be sourced again; accepted ones come first." It opens on all companies, newest first.

What it shows

Tabs at the top filter the list by decision: To review (nobody has decided yet), Accepted, Rejected and All (the default). On the same line, a short counts line describes the companies currently listed, for example "24 shown · 180 people considered · 41 verified leads · 12 reviewed": people considered are candidates, verified leads are people who passed the checks, and reviewed counts companies someone accepted or rejected.

ColumnWhat it shows
CompanyName (click it for details), then its website (or No public domain) and where it came from, in general terms: Company register, Professional data provider, Web research, Buying signal, Added manually, CSV import, Earlier search, a CRM you connected (such as HubSpot), or Other source.
MarketThe company's country.
IndustryIts industry, when known.
LeadsHow many leads came from it, with the number of candidates underneath.
Decisionaccepted, rejected or unreviewed.

At the end of each row, editors and above see a tick (Accept) and a cross (Reject); a company already accepted or rejected only shows the other one. The ⋯ menu next to them has Open details and, for a company with a website, Add to campaign. The registration number, the campaigns the company appeared in and its registry status are in its details.

Use the search box (company, domain or registration number), the markets filter (All markets) and the campaign filter (All campaigns). The round-arrow button (Refresh) reloads the list and Load more shows the next page. If nothing matches, the page says No companies found: "Add a company by its website, run a campaign's sourcing, or adjust the current filters." If the list cannot be fetched, it says Accounts could not be loaded.; click Refresh.

Buying signals found at your leads' companies are on the Signals page, which has no tab of its own: open it with Ctrl+K (Cmd+K on a Mac) by typing "Signals". It is covered in Home, Insights and signals.

Accept or reject a company

Accepting or rejecting a company applies to every campaign in your workspace:

  • Accepted companies are prioritized in future sourcing.
  • Rejected companies are left out of future sourcing. People there who are selected later are not saved (the sourcing card says belonged to a company you rejected). Leads already on your lists stay.

To decide:

  1. Click the tick (Accept) in the company's row. To reject, click the cross (Reject), type a reason and click Confirm (greyed out until you type a reason). A reason is required: without one Rainmaker says Add a reason before rejecting this account.
  2. For several companies, tick them. A bar appears with Accept all, Reject all, Add to campaign and Clear. Reject all asks for one reason for all of them, then Confirm reject.

If some of a batch fail, the page says, for example, 2 of 10 selected account(s) could not be updated.

Add companies to campaigns

  • Add company (top of the page) adds a company by its website, exactly like the campaign's own Add company, and lets you tick any campaigns to search it in. A company you add yourself is accepted straight away.
  • Add to campaign, in a row's ⋯ menu or in the selection bar, adds existing companies to one or more campaigns: tick the campaigns and click Add to campaign (greyed out until a campaign is ticked). You can add up to 100 company and campaign pairs at a time.

The result notice tells you what happened, for example Added to Q4 outbound. Searching now for people with each campaign's job titles. Companies with no website, and rejected companies, are skipped (skipped: no website to search. or skipped: rejected. Accept it first.). A company that is already a target says, for example, "1 already was a target; use "Search again" on the campaign to re-search." If there was nothing to do, the notice says Nothing to add.

Company details

Click a company's name, or Open details in its row's ⋯ menu, to open its details on the right. The header shows its country, its registry status (for example active) and the decision (accepted, rejected or unreviewed). Below that:

  • a short summary, and What their website says: facts quoted from the company's own site, each linked to the page;
  • Identity: Registration, Legal form, Employees, Revenue and Website. A website marked matched by name — not registry-verified was matched on the company name only;
  • Activity: its industry, with View full register entry when a public register entry exists;
  • Why it surfaced: how many people were considered and how many became leads, where it came from (for example Company register, Web research or Buying signal), the campaigns it is in, and up to ten people with their state (lead created when they joined a list);
  • Stored intelligence: address, industry, employee band and industry codes, when known;
  • Decision: a reason box with Accept and Reject (Editors and above).

Missing facts read Not available, Unknown or Unclassified. A person with no name on file shows as Unnamed professional, and a company where nobody has been found yet says No candidates discovered for this account yet. If the panel cannot load, it says Account details could not be loaded.; close it and open it again.

Markets, opt-outs and duplicates

  • Markets. Rainmaker only adds people in countries that are active for your workspace and chosen for the campaign. Everyone else is dropped during sourcing (Out of geo) or rejected on import. Which countries can be activated, and why, is in Privacy and compliance.
  • Opt-outs. People who opted out or are on your do-not-contact list are never added by sourcing or import, cannot be added by hand (This address has opted out, so it can't be added.) and are left out of exports.
  • Duplicates. Within one campaign, the same person is never added twice: imports report them as duplicates and manual adds say This person is already on this campaign's list. The same person can be a lead in more than one campaign. On the Contacts page they appear as one row with each campaign listed. When they reply in one campaign, Rainmaker pauses the emails still queued for them in your other campaigns.

Statuses and what they mean

Lead progress

StatusWhat it meansWhat you can do
Not startedNothing drafted yet.Click Draft sequence.
DraftedA draft exists but is not in the approval queue yet.Wait, or check Review.
Awaiting approvalA draft is waiting in Review.Approve or edit it. See Review and approvals.
BlockedA draft was blocked because a sentence had no source.Open the lead or Review to see why.
Step N sentThe latest message sent was step N.Nothing; the sequence continues.
RepliedThe lead replied.Answer in Inbox.
Meeting bookedA meeting is on the calendar; new drafts are held.Prepare for the meeting.
Meeting cancelledThe meeting was cancelled; the sequence stays paused.Open the lead and click Resume outreach if you want to continue.
Signed upThe lead signed up for your product.Nothing.

Under the status you may see the next send, for example next: step 2 ~in 3 d, a reason the sequence stopped (Sequence stopped - prospect replied, Sequence stopped - meeting booked, Sequence stopped - meeting cancelled), or Snoozed until a date when the lead was out of office or asked you to come back later.

Method

MethodWhat it means
Email firstThe lead has a sendable email; outreach starts with email.
LinkedIn firstOutreach starts on LinkedIn, because there is no sendable email or because your channel split put them there.
On holdNo verified email and no LinkedIn profile, so nothing can be sent yet.

Company decision

DecisionWhat it means
unreviewedNobody has decided yet. Sourcing treats it normally.
acceptedPrioritized in future sourcing. Companies you add yourself start accepted.
rejectedLeft out of future sourcing, and cannot be added as a target until accepted again.

Troubleshooting

Questions about leads and companies

Still stuck?

Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.