Skip to content
Rainmaker
Language EN
Log inTry it free
Try it free · 7 daysPricing
Help centerUpdated · 38 min read

Campaigns

A campaign is one buyer segment with its own leads, drafts, inbox and results. Here is how to create one, launch it, pause it and tune its settings.

A campaign is one buyer segment: one group of people you want to reach, with its own leads, drafts, inbox and results. Rainmaker reads your company website, proposes buyer segments, and creates one campaign for each segment you approve. You can also write your own ICPs (ideal customer profiles), and each one becomes a campaign too.

This guide covers the Campaigns list, creating campaigns, the campaign page, launching and pausing, Copilot and Autopilot, every campaign setting, the Activity page and subject line experiments. For the work inside a campaign, see Leads and companies, Review and approvals, Sequences and sending and Inbox and meetings.

Where to find it and who can use it

Click Campaigns in the sidebar. The New campaign button sits at the top of the Campaigns page (and of Home).

Everyone in the workspace can open campaigns and read their pages. What you can change depends on your role:

What you want to doWho can do it
Open campaigns, read their tabs and settingsEveryone, including Viewer
Start a new campaign, read a website, edit proposed segmentsEditor, Approver, Admin, Owner
Create the campaigns (approve the segments)Approver, Admin, Owner
Fill in About your company during setupAdmin, Owner
Rename a campaign, change its settings, start drafting, run experimentsEditor, Approver, Admin, Owner
Pause outreachEditor, Approver, Admin, Owner
Launch and Resume a campaignApprover, Admin, Owner
Switch a campaign between Copilot and AutopilotAdmin, Owner

An Editor can pause a launched campaign with Pause at the top of any campaign tab. Resume is shown only to roles that can also launch. See Team and roles for everything each role can do.

The Campaigns list

The Campaigns page shows one card per campaign. In the default List view, each card shows the campaign's status, its name (click it to open the campaign), how many people it has and how many messages wait for review or edits, and its next step on the right, such as Review 5 drafts or Source contacts. Search, the status, mailbox and sort menus, and the List / Cards switch sit above them. Cards shows the larger cards described below.

Campaign cards

Each card shows:

  • The campaign name. Click it, or click Open, to open the campaign.
  • A status word, such as discovery, review, outreach, listening, paused or budget paused. The table in Statuses and what they mean explains each one and the friendlier label the campaign page uses for it.
  • A to-do chip that tells you what to do next (see The to-do chip on each card).
  • Contacted: how many leads have been contacted out of all the campaign's leads, with the percentage.
  • Replies: replies received, with the reply rate.
  • Meetings: meetings booked.
  • Icons for the channels the campaign uses (email, LinkedIn), and the date it was created.

Replies and Meetings on a card count the current calendar month only. Contacted counts all time. The campaign's own Overview tab counts everything since the campaign started, so the numbers can differ.

On campaigns that are actively sending, a small dot shows whether Rainmaker is working on that campaign right now: green and breathing while work is in progress, still when nothing is queued, and amber when a task is overdue. Hover over it to see what it is doing, for example sourcing 3 leads · next send ~in 2 h, Nothing queued right now, Sourcing leads overdue by 20 min or Drafting outreach batches stopped — retries exhausted. Owners and admins can click it to open the Operations page.

A dash (—) instead of a percentage means there is nothing to divide by yet: no leads, or nobody contacted.

Filter by sending mailbox

When your workspace has at least one connected mailbox, a menu above the cards lets you show only the campaigns that send from one mailbox. Choose All campaigns to see everything again. Each mailbox is listed with who connected it, default sender for the workspace default, and needs reconnecting when it cannot send.

If no campaign sends from the mailbox you picked, you see No campaigns send from (address) yet. Pick that mailbox in a campaign's settings to send that campaign from it, or click Show all campaigns.

When the list is empty

A new workspace sees No campaigns yet: "Start with your company URL. Rainmaker will propose buyer segments and create a campaign for each approved segment." Editors and above see a New campaign button there. If the page shows Campaigns could not be loaded., reload the page.

Create a campaign

Click New campaign. The page opens on one card, Step 1 · Your product ("What are you selling?"); from the second step it is called Define who should hear from you.

Start from a new or an existing website

If your workspace has never read a website, the card shows the website step straight away. Otherwise a switch at the top of the card lets you choose:

  • New website: Rainmaker reads a site and proposes buyer segments. You can add your own ICPs on the same screen.
  • Existing website: pick one of your websites, see the campaigns it already has, and add ICPs by hand without reading the site again. The card lists up to three of your websites with their campaign counts and a Pick button each, then +N more websites and Show all.

Step 1: Company

A step bar shows where you are: Company, Summary, Segments, then Create. With the Drive account signups goal there is an extra Connect signup source step before Create.

  1. Type your Company website, for example your-company.com. Rainmaker only uses your public pages.
  2. Optionally add a Company deck: drag and drop a PDF or click Choose file. PDF only, 15MB and 60 pages at most. Rainmaker uses it alongside your website to ground targeting and your answer cards. If the file is not a PDF you see That file doesn't look like a PDF. Click the cross next to the file name to remove it.
  3. Click Read company. While Rainmaker works you see Reading your company and building a buyer profile.

The deck uploads after the website is read. You see Deck uploaded — Rainmaker will use it alongside your website., or The deck could not be uploaded — you can add it later from the campaign's Answers section. A failed deck never stops the setup.

Step 2: Summary and About your company

You see Company read complete. Check the Company summary and edit it if it is wrong.

Owners and admins also see About your company. It is optional: your company's legal details, kept for your own records and your privacy notice. Every market works without them. Rainmaker tries to fill these fields from your website:

  • Legal company name
  • Privacy contact email
  • Privacy notice URL (marked "Optional — your public privacy page")
  • Registered address (almost never published online, so you usually type it)

The tick box Mark these details as reviewed is ticked for you once the legal company name, privacy contact email and registered address are filled in. Saving with it ticked records your policy review and source-disclosure readiness. Click Save and continue, or Skip for now to fill this in later in Settings, under Policies. The full rules are in Privacy and compliance.

Other roles see a Review N segments button instead.

Step 3: Segments

You see N buyer segments proposed: "Each approved segment becomes an independent campaign with its own leads, inbox, and outcomes."

  1. Answer What is this campaign's goal? by picking Book meetings or Drive account signups. The goal applies to every campaign you create in this run. See Campaign goal: book meetings or drive signups.
  2. With Drive account signups, you can add a Signup / product link. It is optional and can be added later in campaign settings.
  3. Review each proposed segment. You can edit its name (Segment 1, Segment 2 and so on), Target titles (comma separated), Target countries, Default draft language and Why they buy. Open View pains, triggers, and disqualifiers to read what Rainmaker found. Those three lists are read-only here.
  4. To add your own ICP, click Add another ICP. See Write your own ICP.

The segment name becomes the campaign name. Target countries lists only the markets switched on for your workspace. Default draft language can be Auto — match each lead's country or one fixed language. There are 23, from English, French and German to Polish, Swedish and Greek; see Draft language for the full list and how Auto picks each lead's language. You can change the language of any single sequence later during review.

You cannot remove a segment Rainmaker proposed. Every proposed segment becomes a campaign. A campaign does nothing until someone sources leads for it, so you can simply leave one you do not need.

Step 4: Connect signup source

This step only appears with the Drive account signups goal. It is optional: set up signup tracking now, or skip it and do it later from the campaign's settings. See Goal. Click Create N campaigns when you are ready.

What gets created

With the Book meetings goal, click Create N campaigns on the Segments step. You see Campaigns created: "Your targeting is approved. You can now source and score leads for each segment." Each new campaign is listed with Ready for lead sourcing and a Source leads button. Click View campaigns to go to the list.

Each campaign is created with:

  • The segment's name, countries and draft language.
  • The goal you picked, and the signup link if you gave one.
  • Email as its main channel, Copilot approval mode, and the status Sourcing.
  • As sender, the workspace default mailbox. If several mailboxes are connected and one of them is yours, it starts on yours.

Rainmaker also starts writing answer cards from your website for the new campaigns. Sourcing does not start by itself: click Source leads, or open the campaign's Leads tab. See Leads and companies.

A website can have up to 10 ICPs in total, counting proposed segments and your own.

Write your own ICP

Each ICP you write becomes its own campaign. The form is called Your ICP 1, Your ICP 2 and so on.

  • Required: ICP name, Job titles (comma separated) and Why they buy.
  • Recommended: Target countries (empty means all your active markets), Industries and Company size (employees) with a minimum and a maximum.
  • Optional: Pains and Buying triggers.

If a required field is empty you see Add a name, at least one job title, why they buy to create this ICP. (listing only what is missing). A tip under the form names any recommended field you left empty. Click the cross on the form to remove an ICP you added.

Step-by-step: How to add your own ICPs.

Add ICPs to a website you already use

Choose Existing website, then click Pick next to the website (switch to another from the Website list). You see Campaigns on (website) with each campaign's status and an Open button, and the ICPs the website already has. Pick the goal, fill in Your ICP 1, click Add ICP for more, then click Create 1 campaign (or Create N campaigns). Click Back to return to the website list.

Who can create campaigns

  • Viewers see Read-only workspace: "An editor, approver, admin, or owner must create campaigns." They cannot start the setup.
  • Editors can read a website and shape the segments, but see Approval required to create campaigns. The create button stays greyed out. An approver, admin or owner must run the setup to create the campaigns.
  • Approvers, admins and owners can create campaigns.

Want to target specific companies you already know? Add them from the campaign's Leads tab: How to add target companies.

Campaign goal: book meetings or drive signups

Every campaign has a goal. It only changes defaults; it never blocks the other outcome.

GoalWhat it changes
Book meetingsReplies steer toward a call. The Overview shows Meetings booked.
Drive account signupsReplies steer toward trying your product, using your Signup / product link. The Overview shows Signed up. Signup tracking tells Rainmaker who created an account.

A meetings campaign still records a signup, and a signups campaign still books a meeting when a prospect asks for one. You can change the goal at any time in the campaign's settings, under Goal.

If a signups campaign is missing something, the Overview shows Campaign goal needs setup with one or both of these lines, and an Open campaign settings link:

  • Signup link not configured — replies can't steer anywhere.
  • Signup tracking not connected — signups can't be attributed. Connect your signup source below.

The campaign page

Opening a campaign lands you on its Overview tab. Every campaign tab has the same header: the campaign name with its rename pencil, the campaign's status (such as Active or Paused), and at the top right Pause (or Resume), the next step and a ⋯ menu. Click Campaigns in the sidebar to go back to the list.

Campaign tabs

The tabs sit directly under the campaign name:

  • Overview: the numbers, approval mode and, folded at the bottom, Recent campaign activity.
  • Leads: the campaign's leads, sourcing and target companies. See Leads and companies.
  • Drafts: this campaign's drafts to review. See Review and approvals.
  • Inbox: replies and sent messages for this campaign. See Inbox and meetings.
  • Settings: everything you can tune, including the sequence. See Campaign settings.

The sequence (email timing, send windows, steps and LinkedIn follow-ups) is the Sequence section of Settings. The Activity page has no tab: a failed campaign, or a drafting run that stopped, links to it.

Status and next run

A strip under the tabs shows the status, such as Active or Paused. While the campaign is sourcing, in review, active or listening, it also shows the next scheduled task, for example Next sourcing run ~in 2 h, Next drafting run due now, Next sending run ~in 3 d or No runs scheduled. Hover over it for the exact time. The strip appears on every campaign tab and refreshes on its own.

While drafting runs, the strip shows a progress bar: Drafting emails — 3 of 12 leads drafted, then 12 leads drafted · wrapping up… at the end.

Campaign progress steps

Below the status, five steps show where the campaign is. A check mark means done, a spinner means working, and a warning triangle means something needs your attention.

StepWhat you may see
TargetApproved: your segment is approved.
ContactsN sourced, Sourcing, Queued, Add contacts, Pick a segment first or Setup required
DraftN messages, Drafting, Queued, Create copy, N blocked or Setup required
ApproveN approved or Review copy
LaunchActive — running now, Start outreach or Setup required

Setup required on Contacts or Draft means sourcing or drafting is not available for your workspace right now. Setup required on Launch means no mailbox can send yet. N blocked on Draft means drafts were stopped because a claim had no source. Fix them in Review.

The main button

At the top right of every campaign tab, next to Pause, one button follows the campaign:

  • Add contacts while the campaign has no leads: opens the Leads tab.
  • Write drafts when it has leads but no drafts yet: opens the campaign's Drafts tab, where you start drafting.
  • Review drafts while drafts wait for a decision. It opens the campaign's Drafts tab, where you review them with an Email / LinkedIn switch. See Review and approvals.
  • Continue to send once drafts are approved and the campaign hasn't launched. It opens Ready to send.

Once the campaign has launched, Pause (or Resume) is the main control. Everything else is in the ⋯ menu: Edit sequence (opens the Sequence section of Settings), Sending setup, Draft sequence (or Drafting setup when drafting is not available) and Export CSV. Draft sequence starts drafting at any time; you see Drafting queued. Progress will update as the worker completes it. See Launch, pause and resume.

Drafting starts by itself once the campaign has new leads: after a sourcing run that found people, after a search of the target companies you added, when you add a lead by hand, and after a CSV import once its leads are scored. Leads added from a CRM or from your LinkedIn network wait for Draft sequence in the ⋯ menu. Once started, it works through all eligible leads in batches.

Numbers on the Overview

The numbers sit in one row (two by two on a phone):

  • Sent: messages sent. Click the number to open the campaign inbox on its sent messages. Click N failed to see the ones that failed.
  • Waiting to send: approved messages that are ready or scheduled.
  • Replies: how many people replied, with the reply rate under it, shown as N% of M sent. Until 5 messages are sent it reads Needs 5+ sent.
  • Meetings (booked) for a Book meetings campaign, or Signed up for a Drive account signups campaign.

Replies and Meetings (or Signed up) appear once something has been sent. While drafts are blocked, a chip under the row says how many, for example 2 blocked · needs sourced revision: they need a sourced revision before they can be approved.

Rename a campaign

Click the pencil next to the campaign name, type the new name, and click the check mark to save or the cross to cancel. Names can be up to 120 characters. You see Campaign renamed. Renaming never changes which segment the campaign targets.

Sequence and LinkedIn sequence

The Sequence section of the campaign's Settings tab (also ⋯ › Edit sequence) holds the Sequence (email timing, send window and steps) and the LinkedIn sequence (follow-ups after a connection is accepted). See Sequences and sending and How to edit your campaign sequence.

Launch, pause and resume

Launch

When at least one draft is approved, click Continue to send (top right of the campaign, on its Drafts tab, or on a batch in Review). It opens Ready to send, which asks for anything still missing (a mailbox, the name people see) and then shows Launch campaign. You need the Approver, Admin or Owner role. The status becomes Active, and messages go out within the campaign's send window and sending limits. See Connect your mailbox when you launch.

Launch needs two things:

  • A connected mailbox that can send. Without one, Ready to send starts on its Mailbox step. You can also connect one in Settings, under Email. See Channels: your mailbox and LinkedIn.
  • At least one approved email that has not been sent yet. Otherwise you see "Approve at least one draft to launch this campaign."

During the free trial, if a card is needed or the trial has ended, Launch campaign is greyed out and the step says why, with Open Billing.

With Autopilot on, a campaign that is waiting in review launches by itself as soon as Autopilot approves drafts.

Pause

Click Pause at the top of any campaign tab. You see Campaign paused. Nothing more goes out until someone resumes it. Approved messages keep their place in the queue.

Resume

Click Resume. You need the Approver, Admin or Owner role, and a mailbox that can send (otherwise you see Sending setup). Rainmaker queues sending again right away.

If the page shows Campaign state changed, but campaign progress could not be refreshed. Reload the page to confirm the latest state., the change worked. Reload to see it.

When a campaign pauses by itself

Rainmaker pauses a campaign on its own when:

  • The daily email limit is reached. The campaign sent its Max emails per day and the status becomes Paused — budget reached. This also happens when the workspace's monthly spend cap is reached. Sending does not restart by itself the next day: click Resume.
  • Deliverability drops. Once a campaign has sent at least 20 emails, Rainmaker pauses it if more than 3% bounce or more than 0.1% are marked as spam. You get a notification: Deliverability paused a campaign. This safeguard reads the bounce and spam-complaint reports that Rainmaker's own sending service receives. Emails sent from your own connected mailbox don't produce these reports, so for those the safeguard does not pause anything: watch your mailbox for bounce messages instead.
  • The whole workspace's bounce or complaint rate is unhealthy. Rainmaker regularly checks this and pauses all active campaigns.
  • The campaign's chosen mailbox or LinkedIn account is disconnected. A campaign that was sending from it is paused, and its sender choice is cleared. Pick a new sender in the campaign's Settings, then resume.

On Home, a stopped campaign shows a line such as “(name)” is paused — nothing is going out. or “(name)” is paused — it reached its daily email limit.

In each case, fix the cause before you click Resume. See Sequences and sending for sending limits and deliverability.

Deleting a campaign

There is no way to delete or archive a campaign. Pause it instead. A paused campaign stays in the list and sends nothing.

Copilot and Autopilot

Every campaign has an approval mode, set on the Overview tab under Approval mode. A badge shows Copilot or Autopilot.

  • Copilot — human review (the default): "You approve each batch before it can send."
  • Autopilot: approves and sends drafts that pass the sourcing check, without anyone reading them first. It needs a daily email limit, and pauses the campaign when that limit or the workspace's spend cap is reached.

Only admins and owners can switch modes. Other roles see the choice greyed out with Requires the autopilot permission.

Turn on Autopilot

  1. Click Autopilot. The Turn on autopilot? window explains that drafts will go out without human review.
  2. Check Max emails per day. It is required and starts at the campaign's current limit, or 50 if it has none. After that many emails in a day, the campaign pauses until you click Resume.
  3. Click Turn on autopilot, or Keep copilot review to change nothing.

You see Autopilot on — grounded drafts will send without review, up to the daily email limit. To switch back, click Copilot — human review. You see Autopilot off — drafts return to copilot review. Switching back does not un-approve anything already approved.

What Autopilot approves

Each time a drafting run finishes, Autopilot approves every draft that passed the sourcing check, for email and LinkedIn. If the campaign was waiting in review, it launches. You get a notification: Autopilot approved N drafts, with the number of blocked drafts it left for review.

What Autopilot never does

  • It never approves a blocked draft (a claim without a source). Those wait in Review for a person.
  • It never sends replies to prospects or books meetings. Those always need a person.
  • It never resumes a paused campaign.

When Autopilot does nothing

  • The campaign is paused or Paused — budget reached.
  • The campaign's deliverability safeguard has tripped.
  • No drafting run has finished since you turned it on. Drafts that were already waiting are approved after the next drafting run, not the moment you switch.

Step-by-step: Copilot vs Autopilot.

People already contacted

In the campaign's Settings tab, under Audience, you can tick Skip people already contacted by another campaign in this workspace. It is off for every campaign until you tick it, and it only affects the campaign you tick it on.

"Already contacted" means another campaign in this workspace has actually sent this person something: an email, a LinkedIn invitation or a LinkedIn message. Drafts and approved messages that have not gone out yet do not count. Rainmaker recognises the person by email address, LinkedIn profile, or the record they were found from.

While it is ticked:

  • Sourcing does not add them. The search card counts them as were already contacted in another campaign.
  • A CSV or CRM import skips them and lists them as already contacted by another campaign.
  • Adding them by hand shows a message saying another campaign already contacted them.
  • Leads already on the campaign get nothing new drafted, and a message that is about to go out is held as Blocked with the reason Already contacted in campaign and the other campaign's name. Rainmaker checks again just before sending, so two campaigns picking the same person at the same moment do not both write to them.
  • The Leads tab shows an Already contacted badge with the other campaign's name.

Replies are never held: if someone writes back, you can still answer them.

Unticking it lets held messages send again and lets later sourcing runs add those people. Admins, owners, approvers and editors can change it; viewers see it greyed out with Only people who can edit this campaign can change this.

Campaign settings

Open the campaign and click the Settings tab. The page keeps the campaign header. A side menu splits the settings into sections: Goal, Sequence, Audience, Sending, Replies, Answers (with the number of answer cards) and Advanced. Click one to show it; on a phone, pick it from the Section menu. The settings open on Goal. Each section's header has a one-line description, small chips summarising what is saved, and its own Save changes button.

Every section except Sequence and Answers edits the same set of settings, so Save changes in any of them saves your edits in all of them. You see Campaign sourcing settings saved. A section with edits you have not saved is marked Unsaved changes in the menu. Switching sections keeps your edits; leaving the page (another tab, the sidebar or a reload) asks first: "This campaign has unsaved settings changes. Leave the page and lose them?". Answer cards save as you edit them. Editors and above can change settings. Viewers see them read-only.

Save changes is greyed out while no market is selected, with Add at least one market in Audience before saving. and a Go to Audience link.

Goal

"What this campaign aims for: meetings or signups." The chips show Goal: book meetings or Goal: drive signups, and Booking link set or No booking link.

  • Campaign goal: Book meetings or Drive account signups. It sets the reply call-to-action and the scoreboard metric.
  • Booking link: for Book meetings, where replies that ask for a meeting send prospects. Leave it empty to use the default.
  • Signup / product link: for Drive account signups, where a signups campaign's replies send prospects who have not asked to meet.
  • Signup tracking (Drive account signups only): tells Rainmaker when someone creates an account, so it can credit the signup to the campaign. A badge shows Last signup event received: with a time, or never. Click Send test event to check that Rainmaker receives events. A test only proves Rainmaker's side; a real signup on your site must trigger your own call. Four tabs show how to connect: Website snippet (paste a short snippet in your site's page header), Server hook (code your developer adds where accounts are created), Auth providers and No-code / forms. Generating a signup tracking key needs the Admin or Owner role. The key is shown once: Copy this key now — it will not be shown again.

Sequence

Sequence & timing: when each touch goes out. It holds the email and LinkedIn timing editors (the campaign's former Sequence tab), described in Sequences and sending. Its Save changes saves the sequence you edited. Message text is written in drafts, not here.

Audience

"Who this campaign targets and what it promotes." The chips show the number of markets and the language, for example 2 markets · auto language (or No markets yet), and the saved website (or No website set).

  • Website: the domain your answer cards are based on, for example acme.com. Type a plain domain, with no https:// and no path, or you see Enter a plain domain, like acme.com — no https:// and no path. The website is shared by every campaign on it. After saving you see Website saved. Refresh answers from the new domain in Answers.; use Refresh from website in Answers to pull fresh answers.
  • Target segment: the buyer segment this campaign sources against. With no segment picked you see Pick a segment first. and sourcing will not start. If the segment was renamed or removed you see This campaign's segment no longer exists — pick one. When a segment is picked, the hint lists its job titles and industries (or Any industry).
  • Markets: the countries this campaign sources in, marked US or Europe. You can only pick markets switched on for the workspace. To switch on more, go to Settings, then Compliance.
  • Draft language: Auto — match each lead's country, or one of the 23 languages for every draft (see Draft language). A language picked for one person with Redraft in still applies to that person.
  • Sourcing steer (optional): up to 2,000 characters of guidance for ranking leads, for example "prioritize Series A fintechs; skip staffing agencies". It only changes the order of leads. It never overrides the sourcing check or invents a fact. Each run keeps the steer it started with, so an edit does not change a run already in progress.
  • The switch for people already contacted in your other campaigns, described in People already contacted. It saves on its own as soon as you change it.

Sending

"Where messages go out from and how many." The chips show the saved mailbox and LinkedIn account and the channel split.

  • Send from: Workspace default or one of the connected mailboxes, listed with who connected it. A mailbox that needs reconnecting cannot be newly picked. If the chosen one stops working you see (address) needs reconnecting. This campaign's emails will not send until it is reconnected or you pick another mailbox.
  • LinkedIn account: All connected LinkedIn accounts (rotate) or one account. An account marked paused or needs reconnecting cannot be newly picked. If the chosen account stops working, its messages wait; they are never sent from a teammate's account instead.
  • Channel split: how eligible leads are split between email and LinkedIn. Move the slider anywhere from 0% to 100% LinkedIn; email gets the rest. At 100% email or 100% LinkedIn, every lead reachable on both channels starts on that channel; a lead reachable on only one channel still uses that one. More LinkedIn is warmer and slower; more email is faster and cheaper per message. A line below shows the current split: how many leads start on LinkedIn, on email, are LinkedIn-only (no sendable email), or are on hold. Allow approved channel adjustments: when on, changes a person has approved may shift the split, always between 20% and 80% and never when you set 100% on one channel; when off, the split stays as set. A badge shows Learning applied or Campaign baseline.
  • LinkedIn note tone: Direct, Warm or Concise. Used to draft the connection note for LinkedIn-first leads.
  • Max emails per day: the most emails the campaign sends per day. Leave it blank for no limit. The day resets at midnight UTC. When the campaign has sent that many emails in a day, it stops sending and shows Paused — budget reached, and stays paused until you click Resume. While Autopilot is on, it cannot be left blank.

Replies always go out from the mailbox or LinkedIn account the conversation started in. If no mailbox is connected you see No mailbox is connected yet. Teammates connect their own mailbox and LinkedIn account in Settings. Whether LinkedIn notes send automatically is a workspace LinkedIn setting, not a campaign setting. See Channels: your mailbox and LinkedIn.

The workspace default is the mailbox the workspace sends from when a campaign has no chosen sender. When a teammate connects a new mailbox, campaigns stay on the mailbox they were using.

Replies

"Every drafted reply waits for your approval." These fields shape how drafted replies for this campaign are written and sent. An empty field uses your workspace default. The chip shows no CC or how many addresses are copied.

  • Reply instructions: up to 3,000 characters of guidance.
  • CC on replies: up to 5 addresses, added to every reply you approve. Press Enter or type a comma after each address.

Replies also draw on the answer cards shared by all campaigns; Manage answers opens Answers. The booking link is under Goal. See Inbox and meetings.

Answers

Short answers Rainmaker uses to ground replies: What is it?, Pricing, Privacy, Reliability, Vs. alternatives / DIY, plus any custom ones. Answers are shared by every campaign on the same website, so an edit helps all of them.

  • Each answer shows Generated (written from your website or deck), Yours (you edited it) or Not answered (write your own). Untick Enabled to stop using one. An empty topic says The website doesn't answer this yet — write your own.
  • Under an answer, its sources are listed. An answer taken from your deck shows Company deck with the page, for example Company deck · p.4.
  • Edits save when you click away from the text box. Refreshing never overwrites an answer you edited. If you see That answer could not be saved., copy your text, reload the page and try again.
  • Refresh from website re-reads your website. You see Refresh queued — it will re-check the website and update any answers you haven't edited yourself. and later a line such as Read 6 pages from acme.com · 4 cards created.
  • Add your deck (or Re-read deck) uploads a PDF company deck. You see Deck uploaded — extracting text now, this usually takes a few seconds. and then the file name with N pages read. If reading fails you see the file name with the reason, for example We couldn't read text from this PDF — it may be image-only., or Extraction failed. While working, the buttons read Queuing… and Uploading….

Advanced

"Sourcing lanes, web discovery and spend caps." It holds three parts, described below: How leads are found, Website deep-crawling and Run size and budget, followed by a read-only Sequence summary.

How leads are found

Rainmaker always searches two ways at once: people-first (people matching your segment) and account-first (companies and buying signals, then people inside them). A badge shows Learning applied or Campaign baseline. Open Details:

  • A slider sets the People-first share between 20% and 80%; Account and signal-first gets the rest.
  • Consider relevant legal officers: when on, company officers listed in public company registers can become leads, if their role is relevant.
  • Allow approved learning adjustments: when on, changes a person has approved may shift the split within these bounds.

Website deep-crawling

Optional extra discovery on public web pages, next to the regular data sources. A badge shows Enabled or Off.

  • Run web discovery automatically
  • Permit isolated session mode (also needs an approved policy for that website)
  • Learn source allocation

Under Details: Maximum capability (HTTP, Adaptive, Browser, Stealth or Session), Crawl budget in US dollars, Maximum pages (1 to 1,000), Link depth (0 to 8), Concurrency (1 to 32), Seed URLs (one per line, up to 30) and the kinds of pages to use (company, directory, event, jobs, press, social, pdf). At least one kind stays selected. The crawl budget cannot exceed the run data budget.

Run size and budget

  • Candidates per run: contacts fetched per sourcing run, from 2 to 500. Higher fills faster and costs more.
  • Run data budget: the most one sourcing run may spend, in US dollars.
  • Under Details, Maximum provider call: the most a single data lookup may cost. It cannot exceed the run data budget.

At the bottom, Sequence summary repeats the email sequence read-only: the send window, timezone and days, the number of email steps, and whether stop on reply and stop on meeting are on. Change it in Sequence.

If your settings do not save

  • Settings changed in another session. Refresh before saving. Someone else saved first. Reload, then make your change again.
  • Autopilot is on for this campaign, so max emails per day cannot be left blank. Enter a number, or turn autopilot off first.
  • That mailbox cannot send right now. Reconnect it in Settings → Email, or pick another one.
  • That LinkedIn account cannot send right now. Reconnect or turn it back on in Settings → LinkedIn, or pick another one.
  • Check the submitted values and try again. A number is out of range or a link is not a full web address.
  • Campaign settings could not be saved. For example, a market is no longer switched on for the workspace.

Sourcing and drafting messages

Sourcing and the lead list live on the campaign's Leads tab, covered in Leads and companies. These are the campaign-level messages you may see there, and what they mean.

Starting sourcing and drafting

MessageWhat it means
Lead sourcing queued. This page will update automatically.Sourcing started. The button shows Starting, then Sourcing.
Lead sourcing is already queued.A sourcing run was already waiting. Nothing new was started.
Lead sourcing could not be started. Check campaign operations and try again.Sourcing did not start. Try again in a moment.
Pick a segment first., No segment selected or Campaign segment no longer existsThe campaign has no target segment. Pick one in the campaign's Settings, under Audience. The Retry sourcing button stays greyed out until you do. The same applies when you add people from your LinkedIn network: "Your network is matched against this campaign's ICP segment (its job titles and industries)."
Live contact sourcing is not connected. Review setup before continuing.Sourcing is not available for your workspace right now. Contact support from Help.
Drafting queued. Follow its progress from the campaign overview.Drafting started from the Leads tab.
Drafting could not be queued. Check campaign operations and try again.Drafting did not start. Try again in a moment.
Lead sourcing was queued, but campaign progress could not be refreshed. or Drafting was queued, but campaign progress could not be refreshed.It worked. Reload the page to see the latest state.

While sourcing runs

  • Sourcing contacts: "This campaign will populate as verified contacts are saved. Contacts can take a few minutes to appear after sourcing has found them."
  • Sourcing is in progress or Sourcing in progress ("Running for 2:15"): the run is working and the page refreshes by itself. During the first-run product tour the first batch is capped at 10 leads.
  • Sourcing is taking longer than expected: no contacts have been saved for a while and the run may have stalled. Retry to start a fresh run, or import a CSV to continue now.

Rainmaker searches two ways at once, shown as two cards: People-first and Account and signal-first. Each card shows queued, running, saving, completed or failed, with counts such as 12 selected · 8 saved so far or 20 found · saving…, saving… or still looking for contacts.

When a sourcing run ends

MessageWhat it means
This lane finished without finding any contacts.That search found nobody who fits. Widen the segment, markets or sourcing steer.
This lane selected contacts, but none of them could be saved or N of the selected contacts could not be savedContacts were found but dropped, for the reasons listed below.
Part of this lane's work did not completeOne data source had a problem. Whatever was found is kept.
No contacts could be found or enriched for this lane. or This lane stopped before its contacts were saved.That search failed. No reason was recorded means there is no more detail; see the run guidance on the page. "One of the data sources this search relies on returned an error." means a data source had a problem.
Sourcing stopped"No contacts were added. Review the sourcing run, then retry this stage."
Sourcing budget blocked this runThe Run data budget or Maximum provider call in the campaign's settings is too low. Raise it under Advanced, Run size and budget, then retry.
A data source limit was reachedA data source is busy. "Rainmaker kept everything it had already found. Wait a little, then try again."
A data source refused the search"One of the sources Rainmaker searches turned the request down, so nothing new was added. Try again later."
Both discovery paths stoppedNeither search returned usable candidates. Retry later, or contact support if it repeats.
Candidate processing stoppedCandidates were found but checking or scoring them failed. Retry the run.
Sourcing needs attentionThe run stopped before contacts were saved. Retry it.
Your free trial has ended — subscribe to keep sourcing"The leads you already have stay in this campaign. Once you subscribe, source again to find more." Click Go to Billing.
The free trial includes 50 sourced leads — subscribe to source more"Your workspace already has 50 leads. Once you subscribe, source again to find more." Click Go to Billing.

Contacts are dropped when they had no verified email, were outside the campaign's markets, were suppressed or unreachable (opted out, on a do-not-contact list, or bounced before), had an email that could not be verified, belonged to a company you rejected, failed during enrichment, or were still being processed when the run ended. After a run, Why these leads shows how many candidates were discovered, dropped at each check, scored and saved.

You also get a notification when a run finishes: A prospecting wave finished — N new leads.

Activity

The Activity page shows what the campaign has done. It has no tab: the next-step link of a failed campaign in the Campaigns list and the Drafts tab of a drafting run that stopped link to it, and you can open it by adding /activity to the end of the campaign's address. The same feed is at the bottom of the campaign's Overview, folded under Recent campaign activity: click it to open. Use Show to switch between two views:

  • Recent activity (the default): the latest events, newest first, such as sourced 12 people, sourced 4 companies, drafted 10 emails, drafted 5 LinkedIn notes, 6 drafts approved, reply from Anna (interested), meeting booked with Anna and meeting cancelled with Anna. Click an event to open it. A new campaign shows No activity yet.
  • Recent jobs: the latest background tasks (sourcing, drafting, sending) with their Status, when they were Scheduled, and the Last error if one failed (in plain words, or "This step hit an error."). A task marked failed is retried; one marked dead has given up.

Click Refresh to update either view. Anyone in the workspace can open this page.

Experiments

The Experiments page tests subject lines against each other. It is not shown in the campaign's tab bar: open it by adding /experiments to the end of the campaign's address. Experiments you already started keep running. While an experiment runs, each newly drafted lead gets one of the subject lines on its first email. The same lead always gets the same variant, and leads are spread evenly across variants. Rainmaker then compares reply rates.

Create a subject experiment

Editors and above see New subject experiment.

  1. Enter a Name (up to 80 characters).
  2. Set Minimum sends per variant, from 10 to 10,000 (default 30).
  3. Write a subject line for variants A and B (up to 200 characters each). Click Add variant for up to four variants. Click the bin next to a variant to remove it; you always keep at least two.
  4. Click Save draft. You see Experiment saved as a draft. Review the variants, then start allocation.

Save draft stays greyed out until every variant has a subject line. A saved experiment's variants cannot be edited. To test different subject lines, create a new experiment.

If you see Add at least two unique, non-empty subject lines., a subject line is empty or two variants share a label. Experiment could not be created. and Experiment could not be updated. mean the change did not go through: reload the page and try again. Viewers can see the experiment buttons, but clicking them shows Your role is not allowed to perform this action.

Run, pause and complete

A campaign without experiments shows No experiments yet: "Create two subject variants to begin a controlled comparison."

Pick an experiment from the list. It shows the number of variants, Total sends, Replies, Confidence, and a table with each variant's Sent, Reply rate and Meeting rate.

  • Start: begins giving new drafts the variants. Only one subject experiment can be running or paused per campaign.
  • Pause and Resume experiment: while paused, new drafts do not get variants.
  • Complete without winner: ends the test. New first emails go back to the last promoted winner, or to Rainmaker's own subject lines if there is none.
  • Promote winner: makes the best subject line the default for new first emails. You see The statistically supported winner is now the campaign default. A trophy marks the winner.

Promotion stays locked until at least two variants reach the minimum sends and the difference in reply rate reaches 95% confidence (1.96 z required; Promotion threshold met when it does). Experiments only affect drafts created while they run. Drafts that already exist keep their subject.

Experiment statuses

StatusMeaning
draftSaved, not started. You can start it.
runningNew drafts get the variants.
pausedNo new assignments. Resume or complete it.
completedFinished, with or without a promoted winner.

Statuses and what they mean

The card on the Campaigns list shows a short status word. The campaign page shows a friendlier label for the same status.

On the cardOn the campaign pageWhat it meansWhat you can do
discoverySourcingCreated, finding leads, nothing drafted yet.Source leads, then click Draft sequence.
reviewIn reviewDrafts exist and wait for approval. Nothing sends yet.Approve drafts in Review, then Launch campaign.
outreachActiveLaunched. Approved messages go out on schedule.Watch the inbox. Pause if needed.
listeningListeningEvery approved email has been sent. Rainmaker waits for replies and sends anything newly approved.Handle replies. Draft more if you add leads.
pausedPausedPaused by a person, by the deliverability safeguard, or because its sender was disconnected. Nothing goes out.Fix the cause, then Resume.
budget pausedPaused — budget reachedThe daily email limit or the workspace spend cap was reached.Raise the limit if you want, then Resume.

The to-do chip on each card

ChipMeaning
Needs edits (N)N drafts are blocked and need a sourced revision.
Review N draftsN drafts wait for approval.
Source contactsThe campaign has no leads yet.
Ready to launchDrafts are approved but the campaign is not sending: it was never launched, or it is paused.
Draft sequenceLeads exist but nobody has been contacted.
ActiveThe campaign is sending.
PausedThe campaign is paused or budget-paused.

Troubleshooting

Questions about campaigns

Still stuck?

Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.