Skip to content
Rainmaker
Language EN
Log inTry it free
Try it free · 7 daysPricing
Help centerUpdated · 14 min read

Privacy and compliance

See the markets you can contact, add your company's legal details if you want them on record, set data retention, and understand how opt-outs and data requests work.

Rainmaker only contacts people in a professional capacity, in markets you have switched on, and never contacts anyone who opted out. This guide covers the Compliance page where you set those rules, what your recipients see in every email, how they can opt out or ask for their data, and what you can and can't do when someone asks to be removed.

Where to find it and who can use it

In the sidebar, click Settings, then Compliance. The page title is Compliance. It covers your active markets, your company details, retention, anonymous learning and, at the bottom, how Rainmaker keeps outreach accountable. While it loads you see "Loading workspace policy".

  • Everyone in the workspace can open the page and see the settings.
  • Only Owners and Admins can change them. For other roles the fields are greyed out and there's no Save changes button.

At the top right: Refresh reloads the page, and Save changes saves everything on the page at once. Save changes is disabled when no market is selected.

The Profile & team page (in Settings) also lists your Active markets, for example "2 active markets: US, FR", or "No markets are enabled yet. Set them under Compliance."

Markets

A market is a country your campaigns can target. Campaigns can only source and contact people in active markets. "Campaigns may target only markets enabled here and in deployment policy."

Which markets are on by default

  • Every available market is on from the moment your workspace is created: the United States and every available European country. You don't need to do anything, and you don't need to fill in your company details first.
  • A market you turn off stays off. See Turning markets off.
  • Countries outside the United States and Europe aren't supported.

The market list

Under Active markets, your markets show as one line, for example "33 markets · Edit". Hover over or tap the count to see their names. Click Edit to open the picker with the selected countries (click Done to fold it again); roles that can't change markets see Show all instead. In the picker, click Add a market to add a country. When every available country is already on, it says "Every available country is already selected."

Each country in the list carries a badge:

BadgeWhat it means
fullRainmaker can find companies in official business registers, people, and signals for this country
people onlyRainmaker can find people for this country, but not from a company register
not available yetNot available yet. Contact Rainmaker support by replying to any email Rainmaker sent you
limitedPartly available

The badge next to the Active markets heading reads Reviewed once someone has ticked Policy reviewed and saved, and Pending review before that.

Your company details

Under Controller and notice ("Optional. Your company's details for your own records and privacy notice. Every market works without them."), you can fill in:

FieldWhat to enter
Controller nameYour company's legal name, as registered
Privacy contactThe email address where privacy questions should go, for example privacy@your-company.com
Privacy notice URLThe address of your public privacy page. Rainmaker stores it, but emails don't link to it. If you type just a domain like your-company.com, it becomes https://your-company.com when you leave the field
Controller addressYour registered postal address

You can also tick:

  • Source disclosure ready: "Outbound notices identify professional data categories and sources."
  • Policy reviewed: "Confirm these controls reflect the workspace operating decision."

All of these are optional. Rainmaker keeps them for your own records and privacy notice. Leaving them empty doesn't switch off any market or stop any email, in Europe or anywhere else. Click Save changes to save them.

You may already have entered these details during onboarding, in the About your company step. It asks for the same details (the privacy notice URL is marked "Optional — your public privacy page") and offers Mark these details as reviewed, ticked for you once the legal company name, privacy contact email and registered address are filled in; saving with it ticked records your policy review and source-disclosure readiness. Skip for now moves on without saving anything. If saving there fails: "These details could not be saved. You can skip this and add them later in Settings → Compliance."

Activate all markets

When some available markets are off (because someone turned them off), a notice titled More markets available appears: "… markets are turned off for this workspace: …. Turn them all back on in one click, or remove any market below and save again whenever you like." Click Activate all … markets to switch them all on and save in one step. You see "Workspace data policy saved. … markets are now active — remove any of them above and save again to narrow it."

Choosing markets for a campaign

A campaign can only target your workspace's active markets. When every active market is already picked for a campaign, the country picker says "All workspace-active markets are selected. Activate more countries in Settings → Compliance." A search with no match shows "No matching countries", and "No countries available" means there's nothing left to add. In the campaign wizard, countries carry a US or Europe badge.

Turning markets off

Click Edit next to your markets, remove the country from the picker and click Save changes. A market you turn off stays off on later saves, even European ones. Rainmaker then stops sourcing there and doesn't send to leads in that country: their messages are blocked. You must keep at least one market on.

Retention limits

"Shorter limits are allowed; regional ceilings cannot be exceeded." Set how many days Rainmaker keeps a prospect's identifying details, counted from when the lead was added:

FieldAllowedDefault
United States1 to 365 days365
Europe1 to 180 days180

Once a day, Rainmaker erases the identifying details of leads older than the limit for their region: name, email address, title, LinkedIn profile, research notes, and the text of messages and replies. The lead stays in your campaign figures without the personal details.

Optional data settings

These options are off by default. They live in the same Controller and notice section.

OptionWhat it does
Anonymous aggregate learning"Contribute coarse outcomes only after privacy thresholds are met." Shares anonymous, rolled-up results to help improve Rainmaker. Nothing that identifies a person or your workspace's prospects
Personal email fallbackFor US prospects only: use a personal email address from a professional data provider when no work address exists
Phone enrichmentRequest phone numbers for manual calling. Numbers on do-not-call lists stay blocked

If you turn on Personal email fallback or Phone enrichment and the option isn't available for your workspace yet, a short note appears under that checkbox: "Not on for your workspace yet: no effect for now."

What your recipients see

The end of every email

Every email Rainmaker sends, cold emails and replies alike, in every market, ends the same way: your signature (your name, your role and company, and your website, when you have set them), then one locked last line:

  • "P.S. If this isn’t relevant, simply reply “NO” and I won’t follow up."

Emails don't include a privacy notice link. Your Privacy notice URL (optional, in Settings, Compliance) is stored but never added to emails, and a missing one doesn't block sending, in Europe or anywhere else.

You edit the signature in Settings, Email, under Identity & signature. The P.S. line can't be edited or removed. See the Channels guide.

One-click unsubscribe

Every email also carries a one-click unsubscribe that mail apps such as Gmail and Outlook show as their own Unsubscribe button next to the sender's name. One click opts the address out of all outreach from Rainmaker.

The public privacy pages

Anyone can use these pages without an account. They are linked from Rainmaker's Trust page.

PageWhat it does
Privacy and opt-outExplains what professional data is used, where it comes from and why, and offers a request form
Request confirmationOpens from the confirmation email and carries out the request
SecurityDescribes the security controls in place today
Opt outCompletes an unsubscribe link. Shows "You're unsubscribed" and "You won't hear from this sender, or anyone else using Rainmaker, again." Without a valid link it shows "This link cannot be used" and "It may be invalid or expired. Contact the sender directly to opt out."

On the Privacy and opt-out page, a person enters their Email address, picks a Request type and clicks Submit request:

Request typeWhat happens after they confirm
Opt out of all outreachTheir address is added to the global do-not-contact list
Delete identifiable dataTheir address is added to the global do-not-contact list and their identifying details are erased (see Erasure)
Tell me what you holdThe confirmation page shows a copy of the data Rainmaker holds about that email address

Every request is confirmed by email first, so nobody can opt out or delete someone else's address. The person gets an email titled "Confirm your privacy request" with a link that works for 24 hours. The page tells them "Check your email for a confirmation link. The request takes effect when the address is confirmed." (For Tell me what you hold it says "We will process the request and follow up if identity verification is required.") Opening the link shows Request confirmed and either "Your request has been processed." or "Your data export is shown below."

While a request is sent the button reads Submitting; if it fails: "The request could not be submitted. Please try again." The confirmation page shows Confirming your request ("This will only take a moment."), and an expired or invalid link shows This link cannot be used: "Submit the request again from the privacy page to receive a fresh confirmation." The opt-out page shows Updating your preference ("Your opt-out is being applied across Rainmaker.") while it works.

If the browser sends a Global Privacy Control signal, the request is treated as Opt out of all outreach, whatever type was picked.

Opt-outs and do-not-contact

Rainmaker checks every address against do-not-contact lists when it drafts a message and again just before sending, so a person who opts out in between is still caught.

How it happenedWhat it blocks
The Unsubscribe button in their mail appAll outreach from every Rainmaker workspace, not only yours
A reply that clearly asks to unsubscribe, including a reply that just says "stop"All outreach from every Rainmaker workspace
A request on the privacy page, confirmed by emailAll outreach from every Rainmaker workspace
A reply saying no or not interested, including a reply of just "NO" (with or without quote marks), as the P.S. line invitesOutreach from your workspace only

An address on the global list is never contacted again by anyone using Rainmaker.

Messages about opted-out people

WhereWhat you see
Adding a lead by hand"This address has opted out, so it can't be added."
Importing leadsRows rejected with "contact previously opted out"
Marking an address as sendable on a lead"This address has opted out or is on the suppression list — it can't be marked sendable."
Inbox, a reply that asked to unsubscribe"No reply — this address unsubscribed and is suppressed."
Inbox, sending a reply"This address is suppressed — the reply was not sent." or "Recipient opted out / suppressed before dispatch"
LinkedIn reply"This person asked not to be contacted, so nothing was sent."
A lead's Why hasn't this sent? panelA do-not-contact or market check marked as failing, with the message held as blocked

Removing someone who asked

You don't need to do anything when someone uses the unsubscribe button, the privacy page, or replies asking to stop: Rainmaker records it automatically. If someone asks you another way (by phone, or in a reply Rainmaker didn't recognise as a request to stop):

  1. Reject any of their drafts still waiting in Review.
  2. Send them to Rainmaker's public Privacy and opt-out page (linked from the Trust page) and ask them to choose Opt out of all outreach or Delete identifiable data. Once they confirm, they are on the global do-not-contact list.

There is no button to add someone to the do-not-contact list yourself.

Un-suppressing someone

You can't undo a genuine opt-out from the app. That covers the unsubscribe button, privacy page requests, and replies Rainmaker read as an explicit request to stop. There's also no in-app way to resume outreach to someone who replied no.

There is one exception, for the Owner. Some older unsubscribe records came from an automatic reading of a reply that only quoted an earlier footer and wasn't a real request. When a lead's message is held because of such a record, the Owner can reverse it:

  1. Open the lead and, on the held message, click Why hasn't this sent?
  2. If the record qualifies, a Misclassified unsubscribe notice appears: "Rainmaker recorded this address as an unsubscribe from an automatic reading of a reply, and that kind of reading can be wrong — for example when a reply only quoted your own opt-out line. Read the actual reply before reversing it."
  3. Click Remove from do-not-contact (misclassified unsubscribe) and confirm Remove from global do-not-contact? with Remove. This removes the person from the list for every workspace.
  4. If it fails you see why: "This address is suppressed for reason "…", which cannot be reversed from the product." (a genuine opt-out), "This address is not currently in the global opt-out registry." (nothing to reverse), "This lead has no email address to un-suppress." or "This address could not be removed from the do-not-contact list."

Erasure

When a person confirms Delete identifiable data, Rainmaker erases their identifying details everywhere it holds them, in every workspace: their name, email address, title and LinkedIn profile on leads and discovered contacts, the messages sent to them and their replies, research notes and sources about them, and related records. Anonymous record shells remain so your campaign numbers still add up, and a minimal do-not-contact record is kept so they are never contacted again. In your workspace, the lead then appears without a name.

Data export

Owners and Admins can download a campaign's leads: open the campaign's Leads page and click Export CSV. Other roles don't see the button. See the Leads and companies guide.

Statuses and what they mean

StatusWhereWhat it meansWhat you can do
ReviewedActive marketsSomeone confirmed the policyNothing
Pending reviewActive marketsPolicy reviewed isn't tickedTick it and click Save changes
full / people onlyMarket listThe market is availableAdd it to your markets
not available yet / limitedMarket listNot, or only partly, availableContact Rainmaker support by replying to any email Rainmaker sent you
More markets availableNoticeAvailable markets are switched offActivate all … markets, or leave them off

Messages and what they mean

MessageWhat it meansWhat to do
"Workspace data policy saved."Your changes are savedNothing
"Privacy notice URL must start with https://"The address isn't a full web addressEnter the full address, for example https://your-company.com/privacy
"Privacy contact must be a valid email address, for example privacy@your-company.com"The contact isn't an email addressEnter an email address
"Controller name must be 200 characters or fewer"Name too longShorten it
"Controller address must be 500 characters or fewer"Address too longShorten it
"US retention must be between 1 and 365 days"Retention out of rangeEnter 1 to 365
"European retention must be between 1 and 180 days"Retention out of rangeEnter 1 to 180
"Select at least one market" or "Select at most 50 markets"Market count out of rangeAdjust the selection
"Policy changed in another session. Refresh before saving."Someone else saved firstClick Refresh, redo your change, save
"Workspace policy could not be saved. Review the fields and try again."The save failedCheck the fields and try again
"Workspace policy could not be loaded."The page didn't loadRefresh the page
"Workspace policy could not be saved."A market you picked isn't valid or isn't available, or the save failedRemove markets marked not available yet and try again

Troubleshooting

Questions about privacy and compliance

Still stuck?

Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.