Skip to content
Rainmaker
Language EN
Log inTry it free
Try it free · 7 daysPricing
Help centerUpdated · 25 min read

Getting started

Sign up, set up your workspace, connect where you send from, and launch your first campaign. Then learn your way around the app.

Rainmaker is an AI sales agent that finds the people most likely to buy from you, writes to each of them with reasons it can back with a source, and helps you turn replies into booked meetings. You stay in control: by default nothing is sent until a person on your team approves it. This guide takes you from sign-up to your first campaign, then shows you the parts of the app you will use every day.

What Rainmaker does, end to end

Rainmaker follows the same five steps for every campaign. The in-app Help page lists them under The five steps.

  1. Create a campaign. You give Rainmaker your company website. It reads the site and proposes buyer segments: the kinds of people who buy what you sell. Approving them creates your campaigns, one per segment.
  2. Source contacts. Rainmaker finds people at matching companies, using public company registers, professional data providers, public web pages and, if you connect it, your own LinkedIn network. Each person gets a fit score with the reasons and signals behind it.
  3. Draft outreach. Rainmaker writes a short sequence of emails (and LinkedIn messages, if you use LinkedIn) for each lead. Every factual sentence is backed by a cited source. A sentence with no source is blocked and cannot be sent.
  4. Approve. You review each draft on the Review page. You can approve, edit or reject it. This is called copilot mode: a human decides before anything goes out.
  5. Send and book meetings. Approved messages go out from your own connected mailbox and LinkedIn account. Replies arrive in Inbox, where Rainmaker drafts answers for you and helps you book calls.

The Help page also explains three ideas behind the product under Key concepts:

  • Copilot, not autopilot: a person approves every message by default. Autopilot, which approves drafts that pass every safety check on its own, is something an Owner or Admin turns on per campaign.
  • Sourced claims: every factual claim in a draft links to a real source. Uncited factual sentences are blocked.
  • Suppression and erasure: people who opted out or asked to be erased are excluded everywhere: from sending, signals and exports.

Where to find it and who can use it

Anyone can sign up for a free trial. Inside a workspace, what you see on your first run depends on your role:

Part of the first runWho sees it
Sign up, sign in, and the workspace chooserEveryone
The welcome screen (connect mailbox, LinkedIn and email signature)Owner, Admin, Approver and Editor. Viewers go straight to Home.
New campaign and the campaign wizardOwner, Admin, Approver and Editor can open it. Only an Owner, Admin or Approver can finish it and create campaigns.
The guided product tourOwner, Admin, Approver and Editor
Home, the command palette, notifications, HelpEveryone
Subscribe (to end the trial with a paid plan)Owner and Admin

Roles are explained in Team and roles.

Try a preview before you sign up

Rainmaker has a public preview page you can use without an account. It is linked from the Rainmaker website as the demo. Enter a company domain and click Run preview. In a few seconds you see a Buyer profile, a few Sample buyers with a fit score each, and one sample email with its sources listed under Every factual claim is sourced.

At the bottom, Start your 7-day trial takes you to sign-up, and the domain you previewed is already filled in when you create your first campaign.

If the preview is busy you may see Too many previews from your network — try again shortly. or The demo is at capacity for today — join the waitlist for full access. Wait and try again later, or simply sign up for the free trial instead.

Create your account

  1. On the Rainmaker website, click the button to start a free trial. You land on a page titled Start your 7-day free trial with the line Set up in a few minutes. Nothing is charged for 7 days.
  2. Sign up with one of the buttons at the top of the card, or with your email address. If you sign up with email, you may be asked to confirm it with a code sent to your inbox.
  3. If you typed your company domain into the box on the Rainmaker home page before signing up, Rainmaker remembers it and fills in Company website for you when you create your first campaign.

If you open the sign-up page while you are already signed in, Rainmaker takes you straight into the app instead (you may briefly see Opening your workspace…).

Sign in

Go to the sign-in page, titled Sign in to Rainmaker, and use the same method you used to sign up. If you were trying to open a page in Rainmaker (for example from a link in one of our emails), you land back on that page after signing in. Otherwise you land on Home.

Having trouble? See I can't sign in to Rainmaker.

Create or choose your workspace

A workspace is where your team's campaigns, leads, inbox, settings and billing live. You need one before you can use the app. Signing in alone is not enough.

If you don't have a workspace yet, or none is selected, Rainmaker shows the workspace chooser. In this chooser, and in the workspace switcher in the sidebar, a workspace is called an organization.

  • To create a new workspace, click Create organization, enter a Name (usually your company name) and confirm with Create organization. A new workspace starts its own 7-day free trial. You then go to Home, where a short guided tour starts your first campaign from your company website.
  • To open a workspace you already belong to, click its name. You go straight to Home.
  • If you were invited, the invitation may appear in the list with a Join button.

More about workspaces, switching and invitations: Your account and workspace.

The welcome screen: connect your channels

Rainmaker no longer shows this page right after you create a workspace: you first build your campaign, find leads and get drafts, and Rainmaker asks for your mailbox when you launch (see Connect your mailbox when you launch). The page is still there if you open it (/welcome), and everything on it is also in Settings. It is a full-screen page titled Welcome to Rainmaker: "Connect where your outreach happens. Nothing here is required right now — you can always finish it later from Settings." It has three cards.

Connect your mailbox

Campaigns send from this mailbox, replies show up in your Rainmaker inbox, and your calendar comes bundled with it so Rainmaker can suggest meeting times.

  1. Click Connect mailbox and calendar. The button changes to Taking you to our secure connection partner… and you are taken to sign in to your Google or Microsoft mailbox.
  2. Approve access. You come back to the welcome screen.
  3. A green Connected badge and your address appear when the mailbox works. If it shows Needs reconnecting, click Reconnect.

After you come back, a message tells you how it went: Mailbox connected — sends resume automatically, Finishing your mailbox connection…, Mailbox connected — confirming it's ready to send, Connection not finished, Connection failed (with Try again), or Connected, but the mailbox isn't usable yet (with Reconnect). These are explained in Channels: your mailbox and LinkedIn.

During the free trial you can connect one mailbox.

Connect LinkedIn

"Send connection notes and follow-ups from your own LinkedIn account." Click Connect LinkedIn and sign in to LinkedIn in the dialog that opens. LinkedIn may ask you for a verification code. When it works, a green Connected badge appears.

LinkedIn outreach is a paid feature. During the free trial, Connect LinkedIn cannot add an account and shows LinkedIn is available on the paid plan: "Your free trial covers email outreach. Subscribe to connect your LinkedIn account and send from it." with a Go to Billing button. Subscribe first, then connect LinkedIn from Settings. On a paid plan, The LinkedIn account could not be created. means the connection failed for another reason: try again.

Email signature

This card sets how your emails end and who they come from.

  • From name: the name recipients see your email come from. Leave it empty to use your full name.
  • Full name, Role, Company and Website: the lines of your signature. Leave a field empty to leave that line out.
  • Preview — exactly what recipients see shows the result. The last line, "P.S. If this isn’t relevant, simply reply “NO” and I won’t follow up.", is added to every email and cannot be edited. Emails don't include a privacy link.

While the card loads it shows Loading signature. Click Save. You see Signature saved. (or, if you left the From name empty, a message telling you the name your emails will come from). Only an Owner or Admin can edit and save this card; other roles see it read-only.

Continue or Do this later

  • Continue becomes available once at least one channel works: a connected mailbox that is not flagged as needing reconnection, or a connected LinkedIn account.
  • Do this later is always available. Nothing on this screen is required.

Either button takes you to the campaign wizard if your workspace has no campaigns yet, or to Home if it already has some. Pressing either button finishes the welcome screen for the whole workspace: opening it again afterwards takes you straight on. If you skipped, Home keeps showing what is missing (for example a red band saying sending is off) until you connect a channel from Settings.

Create your first campaign

The campaign wizard opens from the New campaign button at the top of Home and Campaigns. It opens on New campaign with one card, Step 1 · Your product ("What are you selling?"); from the second step the page is titled Define who should hear from you. Here is the short version; the full detail is in Campaigns.

  1. Company: paste your Company website (and, if you like, add a Company deck as a PDF), then click Read company. Rainmaker shows Reading your company and building a buyer profile while it works.
  2. Summary: check the Company summary (you can edit it). Below it, About your company asks for your company's legal details. They are optional: every market works without them. You can fill them in or click Skip for now. Then continue with Review and the number of segments.
  3. Segments: Rainmaker proposes buyer segments. Pick What is this campaign's goal? (meetings or signups), adjust titles, countries, language and Why they buy, and add your own ICPs if you like.
  4. Create: click Create and the number of campaigns. If your goal is signups, a Connect signup source step comes first.
  5. When you see Campaigns created, click Source leads on a campaign, or View campaigns.

Until you create one, the Campaigns page says No campaigns yet: "Start with your company URL. Rainmaker will propose buyer segments and create a campaign for each approved segment."

An Editor can shape everything but sees Approval required to create campaigns: an Approver, Admin or Owner must create the campaigns. A Viewer sees Read-only workspace.

Start from an existing website

Once your workspace has read at least one website, the Step 1 · Your product card has a switch at the top (while loading: Loading your websites):

  • New website: the wizard described above.
  • Existing website (with your number of websites): the card names your websites and how many campaigns each has (for example "2 campaigns" or "no campaigns yet"), three first, then "+1 more website" and Show all. Click Pick next to a website to see Campaigns on that site (or No campaigns on this website yet.) and its Current ICPs. Choose the goal, add one or more ICPs with Add ICP, and click Create and the number of campaigns.

Each ICP card asks for ICP name, Job titles and Why they buy (required), Target countries, Industries and Company size (employees) (recommended), and Pains and Buying triggers (optional). If you leave the recommended fields empty, a tip says "Tip: adding countries, industries, company size keeps sourcing focused on the right companies." A website can have up to 10 ICPs; at that point Add ICP (or Add another ICP in the wizard) is greyed out with A website can have up to 10 ICPs. Writing your own ICPs is covered step by step in Add custom ICPs.

Messages you may see while creating a campaign

MessageWhat it meansWhat to do
"Reading your website for these details…", "Read from your website: … Correct anything that looks wrong.", "Nothing usable was found on your website, so these are blank."About your company tries to fill the legal details from your website. "A registered postal address is almost never published online — that one always needs typing."Check and complete the fields, or click Skip for now. "Fill in what you can — everything here is editable later."
A message naming a field, for example "Privacy contact must be a valid email address, for example privacy@your-company.com"A detail was rejected.Fix the named field and save again, or Skip for now.
"These details could not be saved. You can skip this and add them later in Settings → Compliance."Saving the legal details failed.Click Skip for now and finish them later in Settings, Compliance.
Enter a valid public company website.The address isn't a usable public website.Type a plain address such as your-company.com. Read company stays greyed out until you type at least three characters.
Rainmaker could not reach this site. Try again in a moment.The site could not be read.Check that it opens without a login, then try again.
The AI model service is temporarily unavailable. Try again in a moment.A temporary problem on Rainmaker's side.Wait a minute and try again.
Sign in and select a workspace before starting.Your session ended or no workspace is selected.Sign in again and pick your workspace.
Your free trial has ended. Start a subscription in Billing to resume.The trial is over.An Owner or Admin subscribes. See Billing and plan.
"That file doesn't look like a PDF.", "Uploading your deck…", "Deck uploaded — Rainmaker will use it alongside your website.", "The deck could not be uploaded — you can add it later from the campaign's Answers section."The optional Company deck must be a PDF ("Optional · PDF only, 15MB / 60 pages max"). A failed deck never stops the website read.Export the deck as a PDF within the limits, or add it later.
Company read complete ("Review the summary before shaping buyer segments.") and "N buyer segments proposed" ("Each approved segment becomes an independent campaign with its own leads, inbox, and outcomes.")The website was read and segments are ready to review.Edit the summary and segments, then continue.
Loading workspace markets…The country list is still loading, so Target countries can't be changed yet.Wait a moment.
"Finish or remove the ICPs you added: each needs a name, at least one job title, and why they buy.", "Add a name, at least one job title, why they buy to create this ICP.", "Each ICP needs a name, at least one job title, and why they buy."An ICP you wrote is incomplete.Fill in the required fields or remove the ICP.
"There is already an ICP (name) on this website. Give each ICP its own name."Two ICPs on one website have the same name.Rename one.
"A website can have up to 10 ICPs. Remove one to add another."The website is full.Remove an ICP first.
The minimum company size is larger than the maximum.The size range is reversed.Swap the two numbers.
"This website is no longer available. Go back and pick another one."The website was removed while you worked.Click Back and pick another one.
"Each segment needs a name, a summary, and at least one target title — and keep between 2 and 10 segments."A segment you edited is incomplete.Complete it, or keep between 2 and 10 segments.
The buyer profile could not be saved. or The buyer profile is incomplete. Review the segments, then try again.Your edits could not be saved, or something required is empty.Review the segments and try again.
"This draft was already approved or removed. Restart onboarding to build a new one." or "This draft is no longer available. Restart onboarding to build a new one."The campaigns were already created (for example in another tab), or the draft is gone.Check Campaigns. If nothing is there, start again with New campaign.
"Your role cannot approve campaign creation. Ask an approver, admin, or owner to approve this targeting." (or "… to add these ICPs.")Your role can't create campaigns.Ask an Approver, Admin or Owner to finish.
"Your workspace role cannot create campaigns. Ask an owner or admin for editor access."Your role is Viewer.Ask an Owner or Admin for the Editor role.
Campaigns could not be created.Something else went wrong.Try again in a moment.
Campaigns created ("Your targeting is approved. You can now source and score leads for each segment."), each campaign marked Ready for lead sourcingDone.Click Source leads or View campaigns.

More about each step: Campaigns.

The guided product tour

The first time you land on Home in a workspace with no campaigns, a short guided tour starts by itself. It starts only when:

  • your role can create campaigns (Owner, Admin, Approver or Editor),
  • the workspace has no campaigns yet, and
  • you have never started, skipped or finished the tour in this workspace before.

The tour highlights the real button to click at each step: New campaign, reading your company, your segments, creating campaigns, opening a campaign, sourcing a first small batch of leads, the lead table, a lead's details, the first drafts, the Review page, approving drafts, launching, and finally the inbox. Some steps have a Next button; on others, the tour moves on when you click the highlighted control. Drafting starts by itself as soon as the first leads are found, so there is nothing to click for it. While Rainmaker is sourcing or drafting, the tour shows a "working" message (Sourcing your first leads… or Rainmaker is writing your first drafts…) and moves on by itself, with a small notice in the corner when the work is done, such as "12 leads sourced" or "12 sequences drafted".

The tour only shows on the page its current step belongs to. If you go elsewhere, it waits until you come back.

To stop the tour, click Skip tour (or the × in the corner of the message). It turns into Yes, skip the tour (hover hint: "Restart anytime from Help."); click it again to close the tour. You then see Tour skipped: "Restart it any time from Help." When you reach the end, you see Tour complete: "Nice — you've seen the essentials."

To run it again from the start, open Help in the sidebar and click Restart the product tour under Guided tour ("A short walkthrough of the basics — Home, starting a campaign, and where to go next."). This button is shown to roles that can create campaigns. If it can't start, you see Couldn't start the tour: "Try again in a moment."

Connect your mailbox when you launch

You can build a campaign, find leads and get drafts without connecting anything. Your mailbox is needed when emails are about to go out, so that is when Rainmaker asks for it.

Once at least one draft is approved, Continue to send opens Ready to send. You find it at the top of the campaign, on its Drafts tab, on a batch in Review, and on Home's checklist. Ready to send has three short steps:

  1. Mailbox: if no mailbox that can send is connected, "Connect the mailbox these emails will be sent from." with Connect mailbox and calendar (or Reconnect, if your mailbox needs reconnecting). You sign in with your email provider and come straight back.
  2. Your name: the name people see in their inbox, filled in for you. Change it if you like, then click Continue.
  3. Launch: how many emails go to how many people, when the first ones go out, who they come from and when the follow-ups go. Click Launch campaign.

A step that is already done is skipped, so with a mailbox and a name already set, Continue to send opens straight on Launch. Drafts still waiting for review stay out until you approve them. If your role can't connect a mailbox, you see "Ask an owner or admin to connect a mailbox." instead.

When you turn on Autopilot, its confirmation asks for the mailbox the same way. You can still turn Autopilot on.

Your free trial at a glance

Every new workspace starts with a 7-day free trial. You add a card to start it, and nothing is charged before day 7. During the trial:

  • you can source up to 50 leads in total,
  • you can connect one mailbox,
  • you cannot connect a LinkedIn account until you subscribe.

While the trial runs, a banner at the top of every page says how many days are left, for example "12 days left in your free trial — 50 leads, one mailbox, no LinkedIn seat until you subscribe." When it ends, the banner says "Your free trial has ended. Subscribe to keep sourcing, sending, and connecting LinkedIn." Click Subscribe → to choose a plan. Only an Owner or Admin can subscribe. Prices, what happens at the end of the trial and how billing works are in Billing and plan.

Find your way around

The sidebar

The sidebar is on the left on a computer. On a phone, open it with the menu button at the top. There is no separate mobile app: Rainmaker runs in your phone's web browser, and your browser may offer to add it to your home screen.

  • At the top: the Rainmaker logo (click it to go Home) and the notifications bell.
  • Below it, the workspace switcher with your current workspace's name. See Your account and workspace.
  • A sending status button that shows whether your mailbox is ready (for example Ready, No sender connected or Paused — deliverability protection). Click it for the numbers and See details. Under it, small badges such as "1 mailbox healthy", "1 LinkedIn seat", "2 signal types this month", or a red "needs re-auth" badge when a mailbox or LinkedIn account must be reconnected.
  • The main items: Home, Review, Inbox, Campaigns, Contacts and Insights. Review shows a red count of items waiting for a decision. Inbox shows a green count of replies waiting for you.
  • Pinned lower down: Referral Rewards, Settings and Help.
  • At the bottom: your name. Click it to manage your account or sign out.

New campaign is not in the sidebar: it is the button at the top of Home and Campaigns, for roles that can create campaigns.

Some sidebar items hold more than one page, shown as tabs at the top of the page:

  • Inbox: Inbox and Meetings.
  • Contacts: My campaign contacts, My LinkedIn network and Companies.
  • Insights: Insights and Ask, when Ask is available for your workspace.

Hover over a sidebar item to see a one-line description of what it is for:

ItemDescription
HomeWhat needs your attention today
ReviewEverything the agent wants to send, awaiting your yes
InboxProspect replies and booked meetings
CampaignsCreate and run outreach campaigns
ContactsEvery person and company across your campaigns, and your own LinkedIn network
InsightsPerformance and what the agent learned
Referral RewardsGive $10, get $10 when a friend you refer pays
SettingsWorkspace configuration
HelpDocs and support

Long tables across the app are split into pages. The bottom of a table shows the range, such as "1–25 of 140", with Previous page and Next page buttons, or a "No …" line when the table is empty.

Home

Home shows what your outreach is doing right now and anything stopping it. The full detail is in Home, Insights and signals. At a glance:

  • A red band appears only when outreach has actually stopped, for example when sending is off because your sender details are missing, a campaign is paused, or a mailbox needs reconnecting. Each line has a Fix button that takes you to the right setting.
  • A blue band shows things worth knowing while sending continues, such as a mailbox close to its daily limit. Each line has a Details link.
  • The getting-started checklist sits at the top of Home, titled Get set up, with how many of five steps are done and, during your free trial, the days left (for example Get set up · 2 of 5 done · 9 days left in your trial). The steps are Tell Rainmaker what you sell (button Start), Find your first leads (Find leads), Get your first drafts (Write drafts), Connect your mailbox (Connect mailbox) and Approve and send your first emails (Review drafts). Each step ticks itself, with its date, as soon as it is done, in any order; only the next step shows its button. Find leads and Write drafts start the work right from Home and tell you where the results will appear. If your role can't do a step, you see who to ask instead. The checklist can't be closed; it goes away for good once all five steps are done. While it loads you see Loading your getting-started checklist. If it can't load, you see Getting-started checklist unavailable: "Your campaign setup steps could not be loaded. The numbers below are unaffected." Click Retry. See The getting-started checklist.
  • Once the checklist is done, Home suggests a next step:
    • Start with your first buyer segment: "Add your company URL and approve the buyer profile before sourcing begins." with Create campaign.
    • Continue and your campaign's name: "The buyer segment is ready. Add contacts, draft outreach, and review it before launch." with Continue campaign.
    • Outreach is active, but no replies yet: "Review targeting and approved copy before increasing volume."
  • Once you have a campaign, Home shows your numbers (messages sent, replies, meetings booked), Recent replies and meetings and a Daily breakdown.

The command palette

Press Cmd+K on a Mac, or Ctrl+K on Windows and Linux, from any page. The search box says "Search pages, actions, campaigns…". Type part of a name. Use the arrow keys and Enter to open a result, or Esc to close. If nothing matches you see No matches.

The palette lists every main page, including some that are not items of their own in the sidebar, such as Companies, Meetings, LinkedIn, Signals, Web discovery and Trust (which opens the trust content at the bottom of Settings, Compliance). It also lists the New campaign action and each of your campaigns by name. Some entries only appear for roles that can use them: Operations for the Owner, and Billing and Integrations for Owners and Admins.

Notifications

The bell at the top of the sidebar shows a count of notifications you have not read yet (screen readers announce it as "Notifications, 3 unread"). Click it to open the list. Rainmaker notifies you when:

NotificationWhat it means
"Autopilot approved 5 drafts."Autopilot approved drafts for a campaign. Drafts it could not approve stay on Review, and the line says how many.
"Deliverability paused a campaign."Too many emails bounced or were marked as spam, so Rainmaker paused the campaign to protect your domain. The reason may follow in brackets.
"A prospecting wave finished — 12 new leads."A sourcing run finished and added new leads.
"A LinkedIn account stopped working — automated LinkedIn sending from it is paused until you reconnect it."Reconnect the account in Settings, LinkedIn.
A hot reply: a lead "replied and wants to meet" or "looks like a hot lead — a draft is ready to review."A promising reply came in and Rainmaker drafted an answer for you to check.
"An action you approved is done" or "An action you approved failed"A proposed action you approved on the Review page (for example pausing or renaming a campaign) was carried out, or could not be.
"A lead created an account." (with the lead's name)Someone you contacted signed up for your product. Used by signup campaigns.

Read status is personal: what you read stays unread for your teammates. Click Mark all read to mark the notifications currently in the list as read. They stay on screen, dimmed, until the list refreshes. Notifications that arrive after you opened the list stay unread. When there is nothing new, the list says You're all caught up. Hover over a time to see the exact date and time.

The list refreshes by itself every minute or so, so you see new events even when you are on another page.

The Help page

Click Help in the sidebar. The page, titled Getting started, has:

  • The five steps from a new workspace to your first meeting,
  • Key concepts (copilot mode, sourced claims, suppression and erasure),
  • Guided tour with Restart the product tour,
  • More: shortcuts to Start a campaign, Settings & compliance and the Trust center.

You can always come back to this help center for full answers.

Statuses and what they mean

StatusWhereWhat it meansWhat you can do
ConnectedWelcome screen, mailbox or LinkedIn cardThe channel works.Nothing. You can press Continue.
Needs reconnectingWelcome screen, mailbox cardThe mailbox is connected but cannot send or read mail right now.Click Reconnect and sign in again.
Continue greyed outWelcome screenNo channel works yet.Connect a mailbox (or LinkedIn on a paid plan), or click Do this later.
"N days left in your free trial"Banner at the topYour trial is running.Click Subscribe → when you are ready.
"Your free trial has ended."Banner at the topSourcing, sending and connecting LinkedIn are stopped until you subscribe.An Owner or Admin clicks Subscribe →.
"Get set up · N of 5 done"Home checklistHow far you are in the first-run steps.Click the button next to the next step.
ReadySidebar sending statusYour mailbox can send.Nothing.
No sender connectedSidebar sending statusNo mailbox is connected.Connect one in Settings, Email.
Paused — deliverability protectionSidebar sending statusSending is paused to protect your domain.Click it, then See details.
"needs re-auth"Sidebar badgesA mailbox or LinkedIn account must be reconnected.Reconnect it in Settings.

Troubleshooting

Questions about getting started

Still stuck?

Search the troubleshooting answers, or follow a step-by-step tutorial with screenshots.